lkml.org 
[lkml]   [2012]   [Apr]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH V2 2/2] staging: Documentation: add proximity_sampling_period as sysfs details
    On 4/12/2012 8:08 AM, Laxman Dewangan wrote:
    > Add the sysfs proximity_sampling_period for sampling period of
    > proximity sensing.
    >
    > Signed-off-by: Laxman Dewangan<ldewangan@nvidia.com>
    > ---
    > .../staging/iio/Documentation/sysfs-bus-iio-light | 7 +++++++
    > 1 files changed, 7 insertions(+), 0 deletions(-)
    >
    > diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
    > index edbf470..9d6108b 100644
    > --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light
    > +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light
    > @@ -83,3 +83,10 @@ Description:
    > Hardware or software applied calibration scale factor assumed
    > to account for attenuation due to industrial design (glass
    > filters or aperture holes).
    > +
    > +What: /sys/bus/iio/devices/device[n]/proximity_sampling_period
    > +KernelVersion: 3.5
    > +Contact: linux-iio@vger.kernel.org
    > +Description:
    > + Hardware dependent mode for proximity sensor device to set/get
    > + the sampling rate of proximity sensing and conversion.
    Ah, that explains what it is. Sorry, use
    in_proximitiy0_sampling_frequency to provide equivalent
    control please. Might be a pain here, but this interface will just
    provide the same info as the existing
    one in a different form. Note that sampling_frequency is documented as
    a general one, but can
    be extended to individual channels.

    Actually add it to the iio-core as an element in the info_mask as I
    doubt this will be the last time
    we see this control. This will need to be a precursor patch to the
    driver obviously.

    IIO_CHAN_INFO_SAMP_FREQ and the relevant shared and separate macros need
    to go in
    iio.h + the text entry in industrialio-core.c

    If you like I can do this but it'll be quicker if you do :)


    \
     
     \ /
      Last update: 2012-04-12 11:41    [W:0.025 / U:120.332 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site