lkml.org 
[lkml]   [2012]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] ARM: u300: configure some pins as an example
Date
From: Linus Walleij <linus.walleij@linaro.org>

To show how the pin configuration is used on the U300, let's
include some configs for two GPIO pins.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
arch/arm/mach-u300/core.c | 25 +++++++++++++++++++++++--
1 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index f326d31..ab48547 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -27,6 +27,7 @@
#include <linux/mtd/fsmc.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinconf-generic.h>
#include <linux/dma-mapping.h>

#include <asm/types.h>
@@ -1605,7 +1606,23 @@ static struct platform_device dma_device = {
},
};

-/* Pinmux settings */
+static unsigned long g0d_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
+};
+
+static unsigned long g1d_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
+};
+
+static unsigned long g0i_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
+};
+
+static unsigned long g1i_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
+};
+
+/* Pin control settings */
static struct pinctrl_map __initdata u300_pinmux_map[] = {
/* anonymous maps for chip power and EMIFs */
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
@@ -1615,6 +1632,11 @@ static struct pinctrl_map __initdata u300_pinmux_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
+ /* some pin configurations */
+ PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "GPIO0", g0d_conf),
+ PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "GPIO1", g1d_conf),
+ PIN_MAP_CONFIGS_PIN("mmci", "idle", "pinctrl-u300", "GPIO0", g0i_conf),
+ PIN_MAP_CONFIGS_PIN("mmci", "idle", "pinctrl-u300", "GPIO1", g1i_conf),
};

struct u300_mux_hog {
@@ -1640,7 +1662,6 @@ static int __init u300_pinctrl_fetch(void)

for (i = 0; i < ARRAY_SIZE(u300_mux_hogs); i++) {
struct pinctrl *p;
- int ret;

p = pinctrl_get_select_default(u300_mux_hogs[i].dev);
if (IS_ERR(p)) {
--
1.7.8


\
 
 \ /
  Last update: 2012-03-06 23:09    [W:0.047 / U:0.756 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site