lkml.org 
[lkml]   [2012]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv2 3/3] misc: rename bmp085 to bmp18x
Date
The bmp085 chip has been deprecated by the newer bmp18x chip family from
Bosch Sensortec.

Reviewed-by: Stefan Nilsson <stefan.nilsson@unixphere.com>
Signed-off-by: Eric Andersson <eric.andersson@unixphere.com>
---
drivers/misc/Kconfig | 18 +-
drivers/misc/Makefile | 6 +-
drivers/misc/bmp085.c | 514 --------------------------------------------
drivers/misc/bmp18x-i2c.c | 132 +++++++++++
drivers/misc/bmp18x-spi.c | 140 ++++++++++++
drivers/misc/bmp18x.c | 512 +++++++++++++++++++++++++++++++++++++++++++
include/linux/i2c/bmp085.h | 63 ------
include/linux/i2c/bmp18x.h | 63 ++++++
8 files changed, 859 insertions(+), 589 deletions(-)
delete mode 100644 drivers/misc/bmp085.c
create mode 100644 drivers/misc/bmp18x-i2c.c
create mode 100644 drivers/misc/bmp18x-spi.c
create mode 100644 drivers/misc/bmp18x.c
delete mode 100644 include/linux/i2c/bmp085.h
create mode 100644 include/linux/i2c/bmp18x.h

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 9bf65c3..00a8701 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -451,35 +451,35 @@ config ARM_CHARLCD
line and the Linux version on the second line, but that's
still useful.

-config BMP085
- tristate "BMP085 digital pressure sensor"
+config BMP18X
+ tristate "BMP18X digital pressure sensor"
depends on (I2C || SPI_MASTER) && SYSFS
help
Say Y here if you want support for Bosch Sensortec's digital
pressure sensors BMP085 and BMP18x.

To compile this driver as a module, choose M here: the
- module will be called bmp085.
+ module will be called bmp18x.

-config BMP085_I2C
+config BMP18X_I2C
tristate "support I2C bus connection"
- depends on BMP085 && I2C
+ depends on BMP18X && I2C
help
Say Y here if you want to support Bosch Sensortec's digital pressure
sensor hooked to an I2C bus.

To compile this driver as a module, choose M here: the
- module will be called bmp085-i2c.
+ module will be called bmp18x-i2c.

-config BMP085_SPI
+config BMP18X_SPI
tristate "support SPI bus connection"
- depends on BMP085 && SPI_MASTER
+ depends on BMP18X && SPI_MASTER
help
Say Y here if you want to support Bosch Sensortec's digital pressure
sensor hooked to an SPI bus.

To compile this driver as a module, choose M here: the
- module will be called bmp085-spi.
+ module will be called bmp18x-spi.

config PCH_PHUB
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 509d056..1cfa82c 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -10,9 +10,9 @@ obj-$(CONFIG_INTEL_MID_PTI) += pti.o
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
-obj-$(CONFIG_BMP085) += bmp085.o
-obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o
-obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o
+obj-$(CONFIG_BMP18X) += bmp18x.o
+obj-$(CONFIG_BMP18X_I2C) += bmp18x-i2c.o
+obj-$(CONFIG_BMP18X_SPI) += bmp18x-spi.o
obj-$(CONFIG_ICS932S401) += ics932s401.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
deleted file mode 100644
index 78406d7..0000000
--- a/drivers/misc/bmp085.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
- Copyright (c) 2012 Bosch Sensortec GmbH
- Copyright (c) 2012 Unixphere AB
-
- This driver supports the bmp085 digital barometric pressure
- and temperature sensor from Bosch Sensortec. The datasheets
- are available from their website:
- http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
- http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
-
- A pressure measurement is issued by reading from pressure0_input.
- The return value ranges from 30000 to 110000 pascal with a resulution
- of 1 pascal (0.01 millibar) which enables measurements from 9000m above
- to 500m below sea level.
-
- The temperature can be read from temp0_input. Values range from
- -400 to 850 representing the ambient temperature in degree celsius
- multiplied by 10.The resolution is 0.1 celsius.
-
- Because ambient pressure is temperature dependent, a temperature
- measurement will be executed automatically even if the user is reading
- from pressure0_input. This happens if the last temperature measurement
- has been executed more then one second ago.
-
- To decrease RMS noise from pressure measurements, the bmp085 can
- autonomously calculate the average of up to eight samples. This is
- set up by writing to the oversampling sysfs file. Accepted values
- are 0, 1, 2 and 3. 2^x when x is the value written to this file
- specifies the number of samples used to calculate the ambient pressure.
- RMS noise is specified with six pascal (without averaging) and decreases
- down to 3 pascal when using an oversampling setting of 3.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/i2c/bmp085.h>
-
-#define BMP085_CHIP_ID 0x55
-
-#define BMP085_CALIBRATION_DATA_START 0xAA
-#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */
-#define BMP085_CHIP_ID_REG 0xD0
-#define BMP085_CTRL_REG 0xF4
-#define BMP085_TEMP_MEASUREMENT 0x2E
-#define BMP085_PRESSURE_MEASUREMENT 0x34
-#define BMP085_CONVERSION_REGISTER_MSB 0xF6
-#define BMP085_CONVERSION_REGISTER_LSB 0xF7
-#define BMP085_CONVERSION_REGISTER_XLSB 0xF8
-#define BMP085_TEMP_CONVERSION_TIME 5
-
-struct bmp085_calibration_data {
- s16 AC1, AC2, AC3;
- u16 AC4, AC5, AC6;
- s16 B1, B2;
- s16 MB, MC, MD;
-};
-
-struct bmp085_data {
- struct bmp085_data_bus data_bus;
- struct device *dev;
- struct mutex lock;
- struct bmp085_calibration_data calibration;
- u8 oversampling_setting;
- u32 raw_temperature;
- u32 raw_pressure;
- u32 temp_measurement_period;
- u32 last_temp_measurement;
- s32 b6; /* calculated temperature correction coefficient */
-};
-
-static inline int bmp085_read_block(struct bmp085_data *data, u8 reg, int len,
- char *buf)
-{
- return data->data_bus.bops->read_block(data->data_bus.client, reg,
- len, buf);
-}
-
-static inline int bmp085_read_byte(struct bmp085_data *data, u8 reg)
-{
- return data->data_bus.bops->read_byte(data->data_bus.client, reg);
-}
-
-static inline int bmp085_write_byte(struct bmp085_data *data, u8 reg, u8 value)
-{
- return data->data_bus.bops->write_byte(data->data_bus.client, reg,
- value);
-}
-
-static s32 bmp085_read_calibration_data(struct bmp085_data *data)
-{
- u16 tmp[BMP085_CALIBRATION_DATA_LENGTH];
- struct bmp085_calibration_data *cali = &(data->calibration);
- s32 status = bmp085_read_block(data, BMP085_CALIBRATION_DATA_START,
- (BMP085_CALIBRATION_DATA_LENGTH << 1),
- (u8 *)tmp);
- if (status < 0)
- return status;
-
- if (status != (BMP085_CALIBRATION_DATA_LENGTH << 1))
- return -EIO;
-
- cali->AC1 = be16_to_cpu(tmp[0]);
- cali->AC2 = be16_to_cpu(tmp[1]);
- cali->AC3 = be16_to_cpu(tmp[2]);
- cali->AC4 = be16_to_cpu(tmp[3]);
- cali->AC5 = be16_to_cpu(tmp[4]);
- cali->AC6 = be16_to_cpu(tmp[5]);
- cali->B1 = be16_to_cpu(tmp[6]);
- cali->B2 = be16_to_cpu(tmp[7]);
- cali->MB = be16_to_cpu(tmp[8]);
- cali->MC = be16_to_cpu(tmp[9]);
- cali->MD = be16_to_cpu(tmp[10]);
- return 0;
-}
-
-static s32 bmp085_update_raw_temperature(struct bmp085_data *data)
-{
- u16 tmp;
- s32 status;
-
- mutex_lock(&data->lock);
- status = bmp085_write_byte(data, BMP085_CTRL_REG,
- BMP085_TEMP_MEASUREMENT);
- if (status < 0) {
- dev_err(data->dev,
- "Error while requesting temperature measurement.\n");
- goto exit;
- }
- msleep(BMP085_TEMP_CONVERSION_TIME);
-
- status = bmp085_read_block(data, BMP085_CONVERSION_REGISTER_MSB,
- sizeof(tmp), (u8 *)&tmp);
- if (status < 0)
- goto exit;
- if (status != sizeof(tmp)) {
- dev_err(data->dev,
- "Error while reading temperature measurement result\n");
- status = -EIO;
- goto exit;
- }
- data->raw_temperature = be16_to_cpu(tmp);
- data->last_temp_measurement = jiffies;
- status = 0; /* everything ok, return 0 */
-
-exit:
- mutex_unlock(&data->lock);
- return status;
-}
-
-static s32 bmp085_update_raw_pressure(struct bmp085_data *data)
-{
- u32 tmp = 0;
- s32 status;
-
- mutex_lock(&data->lock);
- status = bmp085_write_byte(data, BMP085_CTRL_REG,
- BMP085_PRESSURE_MEASUREMENT +
- (data->oversampling_setting << 6));
- if (status < 0) {
- dev_err(data->dev,
- "Error while requesting pressure measurement.\n");
- goto exit;
- }
-
- /* wait for the end of conversion */
- msleep(2+(3 << data->oversampling_setting));
-
- /* copy data into a u32 (4 bytes), but skip the first byte. */
- status = bmp085_read_block(data, BMP085_CONVERSION_REGISTER_MSB, 3,
- ((u8 *)&tmp)+1);
- if (status < 0)
- goto exit;
- if (status != 3) {
- dev_err(data->dev,
- "Error while reading pressure measurement results\n");
- status = -EIO;
- goto exit;
- }
- data->raw_pressure = be32_to_cpu((tmp));
- data->raw_pressure >>= (8-data->oversampling_setting);
- status = 0; /* everything ok, return 0 */
-
-exit:
- mutex_unlock(&data->lock);
- return status;
-}
-
-/*
- * This function starts the temperature measurement and returns the value
- * in tenth of a degree celsius.
- */
-static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature)
-{
- struct bmp085_calibration_data *cali = &data->calibration;
- long x1, x2;
- int status;
-
- status = bmp085_update_raw_temperature(data);
- if (status < 0)
- goto exit;
-
- x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
- x2 = (cali->MC << 11) / (x1 + cali->MD);
- data->b6 = x1 + x2 - 4000;
- /* if NULL just update b6. Used for pressure only measurements */
- if (temperature != NULL)
- *temperature = (x1+x2+8) >> 4;
-
-exit:
- return status;
-}
-
-/*
- * This function starts the pressure measurement and returns the value
- * in millibar. Since the pressure depends on the ambient temperature,
- * a temperature measurement is executed according to the given temperature
- * measurememt period (default is 1 sec boundary). This period could vary
- * and needs to be adjusted according to the sensor environment, i.e. if big
- * temperature variations then the temperature needs to be read out often.
- */
-static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure)
-{
- struct bmp085_calibration_data *cali = &data->calibration;
- s32 x1, x2, x3, b3;
- u32 b4, b7;
- s32 p;
- int status;
-
- /* update the ambient temperature according to the given meas. period */
- if (data->last_temp_measurement +
- data->temp_measurement_period < jiffies) {
- status = bmp085_get_temperature(data, NULL);
- if (status < 0)
- return status;
- }
-
- status = bmp085_update_raw_pressure(data);
- if (status < 0)
- return status;
-
- x1 = (data->b6 * data->b6) >> 12;
- x1 *= cali->B2;
- x1 >>= 11;
-
- x2 = cali->AC2 * data->b6;
- x2 >>= 11;
-
- x3 = x1 + x2;
-
- b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2);
- b3 >>= 2;
-
- x1 = (cali->AC3 * data->b6) >> 13;
- x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16;
- x3 = (x1 + x2 + 2) >> 2;
- b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15;
-
- b7 = ((u32)data->raw_pressure - b3) *
- (50000 >> data->oversampling_setting);
- p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2));
-
- x1 = p >> 8;
- x1 *= x1;
- x1 = (x1 * 3038) >> 16;
- x2 = (-7357 * p) >> 16;
- p += (x1 + x2 + 3791) >> 4;
-
- *pressure = p;
-
- return 0;
-}
-
-/*
- * This function sets the chip-internal oversampling. Valid values are 0..3.
- * The chip will use 2^oversampling samples for internal averaging.
- * This influences the measurement time and the accuracy; larger values
- * increase both. The datasheet gives an overview on how measurement time,
- * accuracy and noise correlate.
- */
-static void bmp085_set_oversampling(struct bmp085_data *data,
- unsigned char oversampling)
-{
- if (oversampling > 3)
- oversampling = 3;
- data->oversampling_setting = oversampling;
-}
-
-/*
- * Returns the currently selected oversampling. Range: 0..3
- */
-static unsigned char bmp085_get_oversampling(struct bmp085_data *data)
-{
- return data->oversampling_setting;
-}
-
-/* sysfs callbacks */
-static ssize_t set_oversampling(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct bmp085_data *data = dev_get_drvdata(dev);
- unsigned long oversampling;
- int err = kstrtoul(buf, 10, &oversampling);
-
- if (err == 0) {
- mutex_lock(&data->lock);
- bmp085_set_oversampling(data, oversampling);
- mutex_unlock(&data->lock);
- return count;
- }
-
- return err;
-}
-
-static ssize_t show_oversampling(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct bmp085_data *data = dev_get_drvdata(dev);
-
- return sprintf(buf, "%u\n", bmp085_get_oversampling(data));
-}
-static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
- show_oversampling, set_oversampling);
-
-
-static ssize_t show_temperature(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- int temperature;
- int status;
- struct bmp085_data *data = dev_get_drvdata(dev);
-
- status = bmp085_get_temperature(data, &temperature);
- if (status < 0)
- return status;
- else
- return sprintf(buf, "%d\n", temperature);
-}
-static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL);
-
-
-static ssize_t show_pressure(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- int pressure;
- int status;
- struct bmp085_data *data = dev_get_drvdata(dev);
-
- status = bmp085_get_pressure(data, &pressure);
- if (status < 0)
- return status;
- else
- return sprintf(buf, "%d\n", pressure);
-}
-static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL);
-
-
-static struct attribute *bmp085_attributes[] = {
- &dev_attr_temp0_input.attr,
- &dev_attr_pressure0_input.attr,
- &dev_attr_oversampling.attr,
- NULL
-};
-
-static const struct attribute_group bmp085_attr_group = {
- .attrs = bmp085_attributes,
-};
-
-int bmp085_detect(struct device *dev)
-{
- struct bmp085_data *data = dev_get_drvdata(dev);
- struct bmp085_platform_data *pdata = dev->platform_data;
- u8 chip_id = (pdata && pdata->chip_id) ? pdata->chip_id :
- BMP085_CHIP_ID;
-
- if (bmp085_read_byte(data, BMP085_CHIP_ID_REG) != chip_id)
- return -ENODEV;
-
- return 0;
-}
-EXPORT_SYMBOL(bmp085_detect);
-
-static int bmp085_init_client(struct bmp085_data *data,
- struct bmp085_platform_data *pdata)
-{
- int status = bmp085_read_calibration_data(data);
-
- if (status < 0)
- return status;
-
- data->last_temp_measurement = 0;
- data->temp_measurement_period =
- pdata ? (pdata->temp_measurement_period/1000)*HZ : 1*HZ;
- data->oversampling_setting = pdata ? pdata->default_oversampling : 3;
- mutex_init(&data->lock);
-
- return 0;
-}
-
-__devinit int bmp085_probe(struct device *dev, struct bmp085_data_bus *data_bus)
-{
- struct bmp085_data *data;
- struct bmp085_platform_data *pdata = dev->platform_data;
- u8 chip_id = (pdata && pdata->chip_id) ? pdata->chip_id :
- BMP085_CHIP_ID;
- int err = 0;
-
- if (pdata && pdata->init_hw) {
- err = pdata->init_hw(dev);
- if (err) {
- dev_err(dev, "%s: init_hw failed!\n",
- BMP085_NAME);
- return err;
- }
- }
-
- data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- dev_set_drvdata(dev, data);
- data->data_bus = *data_bus;
- data->dev = dev;
-
- if (bmp085_read_byte(data, BMP085_CHIP_ID_REG) != chip_id) {
- dev_err(dev, "%s: chip_id failed!\n", BMP085_NAME);
- err = -ENODEV;
- goto exit_free;
- }
-
- /* Initialize the BMP085 chip */
- err = bmp085_init_client(data, pdata);
- if (err < 0)
- goto exit_free;
-
- /* Register sysfs hooks */
- err = sysfs_create_group(&dev->kobj, &bmp085_attr_group);
- if (err)
- goto exit_free;
-
- dev_info(dev, "Succesfully initialized bmp085!\n");
- return 0;
-
-exit_free:
- kfree(data);
-exit:
- if (pdata && pdata->deinit_hw)
- pdata->deinit_hw(dev);
- return err;
-}
-EXPORT_SYMBOL(bmp085_probe);
-
-int bmp085_remove(struct device *dev)
-{
- struct bmp085_data *data = dev_get_drvdata(dev);
- struct bmp085_platform_data *pdata = dev->platform_data;
-
- sysfs_remove_group(&dev->kobj, &bmp085_attr_group);
-
- if (pdata && pdata->deinit_hw)
- pdata->deinit_hw(dev);
-
- kfree(data);
-
- return 0;
-}
-EXPORT_SYMBOL(bmp085_remove);
-
-#ifdef CONFIG_PM
-int bmp085_disable(struct device *dev)
-{
- struct bmp085_platform_data *pdata = dev->platform_data;
-
- if (pdata && pdata->deinit_hw)
- pdata->deinit_hw(dev);
-
- return 0;
-}
-EXPORT_SYMBOL(bmp085_disable);
-
-int bmp085_enable(struct device *dev)
-{
- struct bmp085_platform_data *pdata = dev->platform_data;
-
- if (pdata && pdata->init_hw)
- return pdata->init_hw(dev);
-
- return 0;
-}
-EXPORT_SYMBOL(bmp085_enable);
-#endif
-
-MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com");
-MODULE_DESCRIPTION("BMP085 driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/misc/bmp18x-i2c.c b/drivers/misc/bmp18x-i2c.c
new file mode 100644
index 0000000..5d35cce
--- /dev/null
+++ b/drivers/misc/bmp18x-i2c.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c/bmp18x.h>
+
+static const unsigned short normal_i2c[] = { BMP18X_I2C_ADDRESS,
+ I2C_CLIENT_END };
+
+static int bmp18x_i2c_read_block(void *client, u8 reg, int len, char *buf)
+{
+ return i2c_smbus_read_i2c_block_data(client, reg, len, buf);
+}
+
+static int bmp18x_i2c_read_byte(void *client, u8 reg)
+{
+ return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int bmp18x_i2c_write_byte(void *client, u8 reg, u8 value)
+{
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static const struct bmp18x_bus_ops bmp18x_i2c_bus_ops = {
+ .read_block = bmp18x_i2c_read_block,
+ .read_byte = bmp18x_i2c_read_byte,
+ .write_byte = bmp18x_i2c_write_byte
+};
+
+static int bmp18x_i2c_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ if (client->addr != BMP18X_I2C_ADDRESS)
+ return -ENODEV;
+
+ return bmp18x_detect(&client->dev);
+}
+
+static int __devinit bmp18x_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bmp18x_data_bus data_bus = {
+ .bops = &bmp18x_i2c_bus_ops,
+ .client = client
+ };
+
+ return bmp18x_probe(&client->dev, &data_bus);
+}
+
+static void bmp18x_i2c_shutdown(struct i2c_client *client)
+{
+ bmp18x_disable(&client->dev);
+}
+
+static int bmp18x_i2c_remove(struct i2c_client *client)
+{
+ return bmp18x_remove(&client->dev);
+}
+
+#ifdef CONFIG_PM
+static int bmp18x_i2c_suspend(struct device *dev)
+{
+ return bmp18x_disable(dev);
+}
+
+static int bmp18x_i2c_resume(struct device *dev)
+{
+ return bmp18x_enable(dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bmp18x_i2c_pm_ops, bmp18x_i2c_suspend,
+ bmp18x_i2c_resume);
+
+static const struct i2c_device_id bmp18x_id[] = {
+ { BMP18X_NAME, 0 },
+ { "bmp085", 0 },
+ { "bmp180", 0 },
+ { "bmp181", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, bmp18x_id);
+
+static struct i2c_driver bmp18x_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = BMP18X_NAME,
+ .pm = &bmp18x_i2c_pm_ops,
+ },
+ .id_table = bmp18x_id,
+ .probe = bmp18x_i2c_probe,
+ .shutdown = bmp18x_i2c_shutdown,
+ .remove = __devexit_p(bmp18x_i2c_remove),
+
+ .detect = bmp18x_i2c_detect,
+ .address_list = normal_i2c
+};
+
+static int __init bmp18x_i2c_init(void)
+{
+ return i2c_add_driver(&bmp18x_i2c_driver);
+}
+
+static void __exit bmp18x_i2c_exit(void)
+{
+ i2c_del_driver(&bmp18x_i2c_driver);
+}
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP18X I2C bus driver");
+MODULE_LICENSE("GPL");
+
+module_init(bmp18x_i2c_init);
+module_exit(bmp18x_i2c_exit);
diff --git a/drivers/misc/bmp18x-spi.c b/drivers/misc/bmp18x-spi.c
new file mode 100644
index 0000000..b263a60
--- /dev/null
+++ b/drivers/misc/bmp18x-spi.c
@@ -0,0 +1,140 @@
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/bmp18x.h>
+
+static int bmp18x_spi_write_byte(void *client, u8 reg, u8 value)
+{
+ u8 data[2] = { reg, value };
+ return spi_write(client, data, 2);
+}
+
+static int bmp18x_spi_read_block(void *client, u8 reg, int len, char *buf)
+{
+ int err = bmp18x_spi_write_byte(client, reg, 0);
+
+ if (err < 0)
+ return err;
+
+ return spi_read(client, buf, len);
+}
+
+static int bmp18x_spi_read_byte(void *client, u8 reg)
+{
+ u8 data;
+ int err = bmp18x_spi_write_byte(client, reg, 0);
+
+ if (err < 0)
+ return err;
+
+ err = spi_read(client, &data, 1);
+ if (err < 0)
+ return err;
+
+ return data;
+}
+
+static const struct bmp18x_bus_ops bmp18x_spi_bus_ops = {
+ .read_block = bmp18x_spi_read_block,
+ .read_byte = bmp18x_spi_read_byte,
+ .write_byte = bmp18x_spi_write_byte
+};
+
+static int __devinit bmp18x_spi_probe(struct spi_device *client)
+{
+ int err;
+ struct bmp18x_data_bus data_bus = {
+ .bops = &bmp18x_spi_bus_ops,
+ .client = client
+ };
+
+ client->bits_per_word = 8;
+ err = spi_setup(client);
+ if (err < 0) {
+ dev_err(&client->dev, "spi_setup failed!\n");
+ return err;
+ }
+
+ return bmp18x_probe(&client->dev, &data_bus);
+}
+
+static void bmp18x_spi_shutdown(struct spi_device *client)
+{
+ bmp18x_disable(&client->dev);
+}
+
+static int bmp18x_spi_remove(struct spi_device *client)
+{
+ return bmp18x_remove(&client->dev);
+}
+
+#ifdef CONFIG_PM
+static int bmp18x_spi_suspend(struct device *dev)
+{
+ return bmp18x_disable(dev);
+}
+
+static int bmp18x_spi_resume(struct device *dev)
+{
+ return bmp18x_enable(dev);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bmp18x_spi_pm_ops, bmp18x_spi_suspend,
+ bmp18x_spi_resume);
+
+static const struct spi_device_id bmp18x_id[] = {
+ { BMP18X_NAME, 0 },
+ { "bmp085", 0 },
+ { "bmp180", 0 },
+ { "bmp181", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, bmp18x_id);
+
+static struct spi_driver bmp18x_spi_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = BMP18X_NAME,
+ .pm = &bmp18x_spi_pm_ops,
+ },
+ .id_table = bmp18x_id,
+ .probe = bmp18x_spi_probe,
+ .shutdown = bmp18x_spi_shutdown,
+ .remove = __devexit_p(bmp18x_spi_remove)
+};
+
+static int __init bmp18x_spi_init(void)
+{
+ return spi_register_driver(&bmp18x_spi_driver);
+}
+
+static void __exit bmp18x_spi_exit(void)
+{
+ spi_unregister_driver(&bmp18x_spi_driver);
+}
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP18X SPI bus driver");
+MODULE_LICENSE("GPL");
+
+module_init(bmp18x_spi_init);
+module_exit(bmp18x_spi_exit);
diff --git a/drivers/misc/bmp18x.c b/drivers/misc/bmp18x.c
new file mode 100644
index 0000000..d8205f1
--- /dev/null
+++ b/drivers/misc/bmp18x.c
@@ -0,0 +1,512 @@
+/* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
+ Copyright (c) 2012 Bosch Sensortec GmbH
+ Copyright (c) 2012 Unixphere AB
+
+ This driver supports the bmp18x digital barometric pressure
+ and temperature sensor from Bosch Sensortec. The datasheets
+ are available from their website:
+ http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
+ http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP180-DS000-07.pdf
+
+ A pressure measurement is issued by reading from pressure0_input.
+ The return value ranges from 30000 to 110000 pascal with a resulution
+ of 1 pascal (0.01 millibar) which enables measurements from 9000m above
+ to 500m below sea level.
+
+ The temperature can be read from temp0_input. Values range from
+ -400 to 850 representing the ambient temperature in degree celsius
+ multiplied by 10.The resolution is 0.1 celsius.
+
+ Because ambient pressure is temperature dependent, a temperature
+ measurement will be executed automatically even if the user is reading
+ from pressure0_input. This happens if the last temperature measurement
+ has been executed more then one second ago.
+
+ To decrease RMS noise from pressure measurements, the bmp18x can
+ autonomously calculate the average of up to eight samples. This is
+ set up by writing to the oversampling sysfs file. Accepted values
+ are 0, 1, 2 and 3. 2^x when x is the value written to this file
+ specifies the number of samples used to calculate the ambient pressure.
+ RMS noise is specified with six pascal (without averaging) and decreases
+ down to 3 pascal when using an oversampling setting of 3.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c/bmp18x.h>
+
+#define BMP18X_CHIP_ID 0x55
+
+#define BMP18X_CALIBRATION_DATA_START 0xAA
+#define BMP18X_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */
+#define BMP18X_CHIP_ID_REG 0xD0
+#define BMP18X_CTRL_REG 0xF4
+#define BMP18X_TEMP_MEASUREMENT 0x2E
+#define BMP18X_PRESSURE_MEASUREMENT 0x34
+#define BMP18X_CONVERSION_REGISTER_MSB 0xF6
+#define BMP18X_CONVERSION_REGISTER_LSB 0xF7
+#define BMP18X_CONVERSION_REGISTER_XLSB 0xF8
+#define BMP18X_TEMP_CONVERSION_TIME 5
+
+struct bmp18x_calibration_data {
+ s16 AC1, AC2, AC3;
+ u16 AC4, AC5, AC6;
+ s16 B1, B2;
+ s16 MB, MC, MD;
+};
+
+struct bmp18x_data {
+ struct bmp18x_data_bus data_bus;
+ struct device *dev;
+ struct mutex lock;
+ struct bmp18x_calibration_data calibration;
+ u8 oversampling_setting;
+ u32 raw_temperature;
+ u32 raw_pressure;
+ u32 temp_measurement_period;
+ u32 last_temp_measurement;
+ s32 b6; /* calculated temperature correction coefficient */
+};
+
+static inline int bmp18x_read_block(struct bmp18x_data *data, u8 reg, int len,
+ char *buf)
+{
+ return data->data_bus.bops->read_block(data->data_bus.client, reg,
+ len, buf);
+}
+
+static inline int bmp18x_read_byte(struct bmp18x_data *data, u8 reg)
+{
+ return data->data_bus.bops->read_byte(data->data_bus.client, reg);
+}
+
+static inline int bmp18x_write_byte(struct bmp18x_data *data, u8 reg, u8 value)
+{
+ return data->data_bus.bops->write_byte(data->data_bus.client, reg,
+ value);
+}
+
+static s32 bmp18x_read_calibration_data(struct bmp18x_data *data)
+{
+ u16 tmp[BMP18X_CALIBRATION_DATA_LENGTH];
+ struct bmp18x_calibration_data *cali = &(data->calibration);
+ s32 status = bmp18x_read_block(data, BMP18X_CALIBRATION_DATA_START,
+ (BMP18X_CALIBRATION_DATA_LENGTH << 1),
+ (u8 *)tmp);
+ if (status < 0)
+ return status;
+
+ if (status != (BMP18X_CALIBRATION_DATA_LENGTH << 1))
+ return -EIO;
+
+ cali->AC1 = be16_to_cpu(tmp[0]);
+ cali->AC2 = be16_to_cpu(tmp[1]);
+ cali->AC3 = be16_to_cpu(tmp[2]);
+ cali->AC4 = be16_to_cpu(tmp[3]);
+ cali->AC5 = be16_to_cpu(tmp[4]);
+ cali->AC6 = be16_to_cpu(tmp[5]);
+ cali->B1 = be16_to_cpu(tmp[6]);
+ cali->B2 = be16_to_cpu(tmp[7]);
+ cali->MB = be16_to_cpu(tmp[8]);
+ cali->MC = be16_to_cpu(tmp[9]);
+ cali->MD = be16_to_cpu(tmp[10]);
+ return 0;
+}
+
+static s32 bmp18x_update_raw_temperature(struct bmp18x_data *data)
+{
+ u16 tmp;
+ s32 status;
+
+ mutex_lock(&data->lock);
+ status = bmp18x_write_byte(data, BMP18X_CTRL_REG,
+ BMP18X_TEMP_MEASUREMENT);
+ if (status < 0) {
+ dev_err(data->dev,
+ "Error while requesting temperature measurement.\n");
+ goto exit;
+ }
+ msleep(BMP18X_TEMP_CONVERSION_TIME);
+
+ status = bmp18x_read_block(data, BMP18X_CONVERSION_REGISTER_MSB,
+ sizeof(tmp), (u8 *)&tmp);
+ if (status < 0)
+ goto exit;
+ if (status != sizeof(tmp)) {
+ dev_err(data->dev,
+ "Error while reading temperature measurement result\n");
+ status = -EIO;
+ goto exit;
+ }
+ data->raw_temperature = be16_to_cpu(tmp);
+ data->last_temp_measurement = jiffies;
+ status = 0; /* everything ok, return 0 */
+
+exit:
+ mutex_unlock(&data->lock);
+ return status;
+}
+
+static s32 bmp18x_update_raw_pressure(struct bmp18x_data *data)
+{
+ u32 tmp = 0;
+ s32 status;
+
+ mutex_lock(&data->lock);
+ status = bmp18x_write_byte(data, BMP18X_CTRL_REG,
+ BMP18X_PRESSURE_MEASUREMENT +
+ (data->oversampling_setting << 6));
+ if (status < 0) {
+ dev_err(data->dev,
+ "Error while requesting pressure measurement.\n");
+ goto exit;
+ }
+
+ /* wait for the end of conversion */
+ msleep(2+(3 << data->oversampling_setting));
+
+ /* copy data into a u32 (4 bytes), but skip the first byte. */
+ status = bmp18x_read_block(data, BMP18X_CONVERSION_REGISTER_MSB, 3,
+ ((u8 *)&tmp)+1);
+ if (status < 0)
+ goto exit;
+ if (status != 3) {
+ dev_err(data->dev,
+ "Error while reading pressure measurement results\n");
+ status = -EIO;
+ goto exit;
+ }
+ data->raw_pressure = be32_to_cpu((tmp));
+ data->raw_pressure >>= (8-data->oversampling_setting);
+ status = 0; /* everything ok, return 0 */
+
+exit:
+ mutex_unlock(&data->lock);
+ return status;
+}
+
+/*
+ * This function starts the temperature measurement and returns the value
+ * in tenth of a degree celsius.
+ */
+static s32 bmp18x_get_temperature(struct bmp18x_data *data, int *temperature)
+{
+ struct bmp18x_calibration_data *cali = &data->calibration;
+ long x1, x2;
+ int status;
+
+ status = bmp18x_update_raw_temperature(data);
+ if (status < 0)
+ goto exit;
+
+ x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15;
+ x2 = (cali->MC << 11) / (x1 + cali->MD);
+ data->b6 = x1 + x2 - 4000;
+ /* if NULL just update b6. Used for pressure only measurements */
+ if (temperature != NULL)
+ *temperature = (x1+x2+8) >> 4;
+
+exit:
+ return status;
+}
+
+/*
+ * This function starts the pressure measurement and returns the value
+ * in millibar. Since the pressure depends on the ambient temperature,
+ * a temperature measurement is executed according to the given temperature
+ * measurememt period (default is 1 sec boundary). This period could vary
+ * and needs to be adjusted according to the sensor environment, i.e. if big
+ * temperature variations then the temperature needs to be read out often.
+ */
+static s32 bmp18x_get_pressure(struct bmp18x_data *data, int *pressure)
+{
+ struct bmp18x_calibration_data *cali = &data->calibration;
+ s32 x1, x2, x3, b3;
+ u32 b4, b7;
+ s32 p;
+ int status;
+
+ /* update the ambient temperature according to the given meas. period */
+ if (data->last_temp_measurement +
+ data->temp_measurement_period < jiffies) {
+ status = bmp18x_get_temperature(data, NULL);
+ if (status < 0)
+ return status;
+ }
+
+ status = bmp18x_update_raw_pressure(data);
+ if (status < 0)
+ return status;
+
+ x1 = (data->b6 * data->b6) >> 12;
+ x1 *= cali->B2;
+ x1 >>= 11;
+
+ x2 = cali->AC2 * data->b6;
+ x2 >>= 11;
+
+ x3 = x1 + x2;
+
+ b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2);
+ b3 >>= 2;
+
+ x1 = (cali->AC3 * data->b6) >> 13;
+ x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16;
+ x3 = (x1 + x2 + 2) >> 2;
+ b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15;
+
+ b7 = ((u32)data->raw_pressure - b3) *
+ (50000 >> data->oversampling_setting);
+ p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2));
+
+ x1 = p >> 8;
+ x1 *= x1;
+ x1 = (x1 * 3038) >> 16;
+ x2 = (-7357 * p) >> 16;
+ p += (x1 + x2 + 3791) >> 4;
+
+ *pressure = p;
+
+ return 0;
+}
+
+/*
+ * This function sets the chip-internal oversampling. Valid values are 0..3.
+ * The chip will use 2^oversampling samples for internal averaging.
+ * This influences the measurement time and the accuracy; larger values
+ * increase both. The datasheet gives an overview on how measurement time,
+ * accuracy and noise correlate.
+ */
+static void bmp18x_set_oversampling(struct bmp18x_data *data,
+ unsigned char oversampling)
+{
+ if (oversampling > 3)
+ oversampling = 3;
+ data->oversampling_setting = oversampling;
+}
+
+/*
+ * Returns the currently selected oversampling. Range: 0..3
+ */
+static unsigned char bmp18x_get_oversampling(struct bmp18x_data *data)
+{
+ return data->oversampling_setting;
+}
+
+/* sysfs callbacks */
+static ssize_t set_oversampling(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bmp18x_data *data = dev_get_drvdata(dev);
+ unsigned long oversampling;
+ int err = kstrtoul(buf, 10, &oversampling);
+
+ if (err == 0) {
+ mutex_lock(&data->lock);
+ bmp18x_set_oversampling(data, oversampling);
+ mutex_unlock(&data->lock);
+ return count;
+ }
+
+ return err;
+}
+
+static ssize_t show_oversampling(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bmp18x_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", bmp18x_get_oversampling(data));
+}
+static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO,
+ show_oversampling, set_oversampling);
+
+
+static ssize_t show_temperature(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int temperature;
+ int status;
+ struct bmp18x_data *data = dev_get_drvdata(dev);
+
+ status = bmp18x_get_temperature(data, &temperature);
+ if (status < 0)
+ return status;
+ else
+ return sprintf(buf, "%d\n", temperature);
+}
+static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL);
+
+
+static ssize_t show_pressure(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int pressure;
+ int status;
+ struct bmp18x_data *data = dev_get_drvdata(dev);
+
+ status = bmp18x_get_pressure(data, &pressure);
+ if (status < 0)
+ return status;
+ else
+ return sprintf(buf, "%d\n", pressure);
+}
+static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL);
+
+
+static struct attribute *bmp18x_attributes[] = {
+ &dev_attr_temp0_input.attr,
+ &dev_attr_pressure0_input.attr,
+ &dev_attr_oversampling.attr,
+ NULL
+};
+
+static const struct attribute_group bmp18x_attr_group = {
+ .attrs = bmp18x_attributes,
+};
+
+int bmp18x_detect(struct device *dev)
+{
+ struct bmp18x_data *data = dev_get_drvdata(dev);
+ struct bmp18x_platform_data *pdata = dev->platform_data;
+ u8 chip_id = (pdata && pdata->chip_id) ? pdata->chip_id :
+ BMP18X_CHIP_ID;
+
+ if (bmp18x_read_byte(data, BMP18X_CHIP_ID_REG) != chip_id)
+ return -ENODEV;
+
+ return 0;
+}
+EXPORT_SYMBOL(bmp18x_detect);
+
+static int bmp18x_init_client(struct bmp18x_data *data,
+ struct bmp18x_platform_data *pdata)
+{
+ int status = bmp18x_read_calibration_data(data);
+
+ if (status < 0)
+ return status;
+
+ data->last_temp_measurement = 0;
+ data->temp_measurement_period =
+ pdata ? (pdata->temp_measurement_period/1000)*HZ : 1*HZ;
+ data->oversampling_setting = pdata ? pdata->default_oversampling : 3;
+ mutex_init(&data->lock);
+
+ return 0;
+}
+
+__devinit int bmp18x_probe(struct device *dev, struct bmp18x_data_bus *data_bus)
+{
+ struct bmp18x_data *data;
+ struct bmp18x_platform_data *pdata = dev->platform_data;
+ int err = 0;
+
+ if (pdata && pdata->init_hw) {
+ err = pdata->init_hw(dev);
+ if (err) {
+ dev_err(dev, "%s: init_hw failed!\n",
+ BMP18X_NAME);
+ return err;
+ }
+ }
+
+ data = kzalloc(sizeof(struct bmp18x_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ dev_set_drvdata(dev, data);
+ data->data_bus = *data_bus;
+ data->dev = dev;
+
+ err = bmp18x_detect(dev);
+ if (err < 0) {
+ dev_err(dev, "%s: chip_id failed!\n", BMP18X_NAME);
+ goto exit_free;
+ }
+
+ /* Initialize the BMP18X chip */
+ err = bmp18x_init_client(data, pdata);
+ if (err < 0)
+ goto exit_free;
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&dev->kobj, &bmp18x_attr_group);
+ if (err)
+ goto exit_free;
+
+ dev_info(dev, "Succesfully initialized bmp18x!\n");
+ return 0;
+
+exit_free:
+ kfree(data);
+exit:
+ if (pdata && pdata->deinit_hw)
+ pdata->deinit_hw(dev);
+ return err;
+}
+EXPORT_SYMBOL(bmp18x_probe);
+
+int bmp18x_remove(struct device *dev)
+{
+ struct bmp18x_data *data = dev_get_drvdata(dev);
+ struct bmp18x_platform_data *pdata = dev->platform_data;
+
+ sysfs_remove_group(&dev->kobj, &bmp18x_attr_group);
+
+ if (pdata && pdata->deinit_hw)
+ pdata->deinit_hw(dev);
+
+ kfree(data);
+
+ return 0;
+}
+EXPORT_SYMBOL(bmp18x_remove);
+
+#ifdef CONFIG_PM
+int bmp18x_disable(struct device *dev)
+{
+ struct bmp18x_platform_data *pdata = dev->platform_data;
+
+ if (pdata && pdata->deinit_hw)
+ pdata->deinit_hw(dev);
+
+ return 0;
+}
+EXPORT_SYMBOL(bmp18x_disable);
+
+int bmp18x_enable(struct device *dev)
+{
+ struct bmp18x_platform_data *pdata = dev->platform_data;
+
+ if (pdata && pdata->init_hw)
+ return pdata->init_hw(dev);
+
+ return 0;
+}
+EXPORT_SYMBOL(bmp18x_enable);
+#endif
+
+MODULE_AUTHOR("Eric Andersson <eric.andersson@unixphere.com>");
+MODULE_DESCRIPTION("BMP18X driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/i2c/bmp085.h b/include/linux/i2c/bmp085.h
deleted file mode 100644
index ee6e398..0000000
--- a/include/linux/i2c/bmp085.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (c) 2012 Bosch Sensortec GmbH
- * Copyright (c) 2012 Unixphere AB
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _BMP085_H
-#define _BMP085_H
-
-#define BMP085_NAME "bmp085"
-#define BMP085_I2C_ADDRESS 0x77
-
-/**
- * struct bmp085_platform_data - represents platform data for the bmp085 driver
- * @chip_id: Configurable chip id for non-default chip revisions
- * @default_oversampling: Default oversampling value to be used at startup,
- * value range is 0-3 with rising sensitivity.
- * @temp_measurement_period: Temperature measurement period (milliseconds), set
- * to zero if unsure.
- * @init_hw: Callback for hw specific startup
- * @deinit_hw: Callback for hw specific shutdown
- */
-struct bmp085_platform_data {
- u8 chip_id;
- u8 default_oversampling;
- u32 temp_measurement_period;
- int (*init_hw)(struct device *dev);
- void (*deinit_hw)(struct device *dev);
-};
-
-struct bmp085_bus_ops {
- int (*read_block)(void *client, u8 reg, int len, char *buf);
- int (*read_byte)(void *client, u8 reg);
- int (*write_byte)(void *client, u8 reg, u8 value);
-};
-
-struct bmp085_data_bus {
- const struct bmp085_bus_ops *bops;
- void *client;
-};
-
-int bmp085_probe(struct device *dev, struct bmp085_data_bus *data_bus);
-int bmp085_remove(struct device *dev);
-int bmp085_detect(struct device *dev);
-#ifdef CONFIG_PM
-int bmp085_enable(struct device *dev);
-int bmp085_disable(struct device *dev);
-#endif
-
-#endif
diff --git a/include/linux/i2c/bmp18x.h b/include/linux/i2c/bmp18x.h
new file mode 100644
index 0000000..f08d82e
--- /dev/null
+++ b/include/linux/i2c/bmp18x.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2012 Bosch Sensortec GmbH
+ * Copyright (c) 2012 Unixphere AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _BMP18X_H
+#define _BMP18X_H
+
+#define BMP18X_NAME "bmp085"
+#define BMP18X_I2C_ADDRESS 0x77
+
+/**
+ * struct bmp18x_platform_data - represents platform data for the bmp18x driver
+ * @chip_id: Configurable chip id for non-default chip revisions
+ * @default_oversampling: Default oversampling value to be used at startup,
+ * value range is 0-3 with rising sensitivity.
+ * @temp_measurement_period: Temperature measurement period (milliseconds), set
+ * to zero if unsure.
+ * @init_hw: Callback for hw specific startup
+ * @deinit_hw: Callback for hw specific shutdown
+ */
+struct bmp18x_platform_data {
+ u8 chip_id;
+ u8 default_oversampling;
+ u32 temp_measurement_period;
+ int (*init_hw)(struct device *dev);
+ void (*deinit_hw)(struct device *dev);
+};
+
+struct bmp18x_bus_ops {
+ int (*read_block)(void *client, u8 reg, int len, char *buf);
+ int (*read_byte)(void *client, u8 reg);
+ int (*write_byte)(void *client, u8 reg, u8 value);
+};
+
+struct bmp18x_data_bus {
+ const struct bmp18x_bus_ops *bops;
+ void *client;
+};
+
+int bmp18x_probe(struct device *dev, struct bmp18x_data_bus *data_bus);
+int bmp18x_remove(struct device *dev);
+int bmp18x_detect(struct device *dev);
+#ifdef CONFIG_PM
+int bmp18x_enable(struct device *dev);
+int bmp18x_disable(struct device *dev);
+#endif
+
+#endif
--
1.7.3.4


\
 
 \ /
  Last update: 2012-03-06 22:09    [W:0.128 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site