lkml.org 
[lkml]   [2012]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V2 1/2] powerpc: Move GE GPIO and PIC drivers
From
Date

On Feb 28, 2012, at 4:22 AM, Martyn Welch wrote:

> Move the GE GPIO and PIC drivers to allow these to be used by non-86xx
> boards.
>
> Signed-off-by: Martyn Welch <martyn.welch@ge.com>
> ---
>
> v2: Move GPIO and PIC drivers to sysdev/ge/ rather than platforms/.
>
> arch/powerpc/platforms/86xx/Kconfig | 3 +++
> arch/powerpc/platforms/86xx/Makefile | 7 +++----
> arch/powerpc/platforms/86xx/gef_ppc9a.c | 2 +-
> arch/powerpc/platforms/86xx/gef_sbc310.c | 2 +-
> arch/powerpc/platforms/86xx/gef_sbc610.c | 2 +-
> arch/powerpc/sysdev/Kconfig | 7 +++++++
> arch/powerpc/sysdev/Makefile | 2 ++
> arch/powerpc/sysdev/ge/Makefile | 2 ++
> .../86xx/gef_gpio.c => sysdev/ge/ge_gpio.c} | 2 +-
> .../86xx/gef_pic.c => sysdev/ge/ge_pic.c} | 2 +-
> .../86xx/gef_pic.h => sysdev/ge/ge_pic.h} | 0
> drivers/watchdog/Kconfig | 2 +-
> 12 files changed, 23 insertions(+), 10 deletions(-)
> create mode 100644 arch/powerpc/sysdev/ge/Makefile
> rename arch/powerpc/{platforms/86xx/gef_gpio.c => sysdev/ge/ge_gpio.c} (98%)
> rename arch/powerpc/{platforms/86xx/gef_pic.c => sysdev/ge/ge_pic.c} (99%)
> rename arch/powerpc/{platforms/86xx/gef_pic.h => sysdev/ge/ge_pic.h} (100%)

gpio driver should be in drivers/gpio. Please split that move out as a separate patch for Grant & Linus to review as part of the GPIO subsystem

- k

\
 
 \ /
  Last update: 2012-03-06 13:23    [W:0.042 / U:0.104 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site