Messages in this thread Patch in this message | | | From | Alok Chauhan <> | Subject | [PATCH] i2c: tegra: Add delay before reset the controller | Date | Fri, 30 Mar 2012 17:36:19 +0530 |
| |
In NACK error condition, I2C controller violates clock-to-data setup time before stop. In Software, because of this reset of controller is happening before I2C controller could complete STOP condition.
Added delay of 2 clock period before reset the controller in case of NACK error.
Signed-off-by: Alok Chauhan <alokc@nvidia.com> --- delay will be calculated based on clock frequency of the bus. drivers/i2c/busses/i2c-tegra.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index e978635..344282e 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -516,6 +516,14 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, if (likely(i2c_dev->msg_err == I2C_ERR_NONE)) return 0; + /* + * In NACK error condition resetting of I2C controller happens + * before STOP condition is properly completed by I2C controller, + * so wait for 2 clock cycle to complete STOP condition. + */ + if (i2c_dev->msg_err == I2C_ERR_NO_ACK) + udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate)); + tegra_i2c_init(i2c_dev); if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { if (msg->flags & I2C_M_IGNORE_NAK) -- 1.7.4.1
| |