lkml.org 
[lkml]   [2012]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/13 v4] drm/i915/intel_i2c: handle zero-length writes
Date
A common method of probing an i2c bus is trying to do a zero-length write.
Handle this case by checking the length first before decrementing it.

This is actually important, since attempting a zero-length write is one
of the ways that i2cdetect and i2c_new_probed_device detect whether
there is device present on the bus with a given address.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
---
drivers/gpu/drm/i915/intel_i2c.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index c12db72..5a94e9b 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -248,9 +248,10 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
u32 val, loop;

val = loop = 0;
- do {
+ while (len && loop < 4) {
val |= *buf++ << (8 * loop);
- } while (--len && ++loop < 4);
+ len -= 1;
+ }

I915_WRITE(GMBUS3 + reg_offset, val);
I915_WRITE(GMBUS1 + reg_offset,
--
1.7.7.3


\
 
 \ /
  Last update: 2012-03-27 20:41    [W:0.099 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site