lkml.org 
[lkml]   [2012]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 1/2] regulator: ad5398: show changing current in uA
From
Date
Integer division may truncate the result.
Current code shows changing current is 0mA when selector is 1 ... 8.

For example:
selector = 1
ad5398_calc_current returns 117, debug message shows 117/1000 = 0mA
selector = 2
ad5398_calc_current returns 234, debug message shows 234/1000 = 0mA
selector = 3
ad5398_calc_current returns 351, debug message shows 351/1000 = 0mA
............
selector = 8
ad5398_calc_current returns 937, debug message shows 937/1000 = 0mA
Show the changing current in uA makes it easier for debugging.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/ad5398.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index 26d23ad..ed58798 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -99,8 +99,8 @@ static int ad5398_set_current_limit(struct regulator_dev *rdev, int min_uA, int
if (ad5398_calc_current(chip, selector) > max_uA)
return -EINVAL;

- dev_dbg(&client->dev, "changing current %dmA\n",
- ad5398_calc_current(chip, selector) / 1000);
+ dev_dbg(&client->dev, "changing current %duA\n",
+ ad5398_calc_current(chip, selector));

/* read chip enable bit */
ret = ad5398_read_reg(client, &data);
--
1.7.5.4




\
 
 \ /
  Last update: 2012-03-27 04:11    [W:0.088 / U:0.640 seconds]
©2003-2014 Jasper Spaans. Advertise on this site