lkml.org 
[lkml]   [2012]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/5] i2c: Convert i2c-octeon.c to use device tree.
On 03/26/2012 08:20 PM, Rob Herring wrote:
> On 03/26/2012 07:27 PM, David Daney wrote:
>> From: David Daney <david.daney@cavium.com>
>>
>> There are three parts to this:
>>
>> 1) Remove the definitions of OCTEON_IRQ_TWSI and OCTEON_IRQ_TWSI2.
>> The interrupts are specified by the device tree and these hard
>> coded irq numbers block the used of the irq lines by the irq_domain
>> code.
>>
>> 2) Remove platform device setup code from octeon-platform.c, it is
>> now unused.
>>
>> 3) Convert i2c-octeon.c to use device tree. Part of this includes
>> using the devm_* functions instead of the raw counterparts, thus
>> simplifying error handling. No functionality is changed.
>
> Shouldn't this patch go after converting the platform to DT?

Nevermind this comment...

>
>> Signed-off-by: David Daney <david.daney@cavium.com>
>> Cc: "Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
>> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
>> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
>> Cc: linux-i2c@vger.kernel.org
>> ---
>>
>> Should probably go via Ralf's linux-mips.org tree.
>>
>> arch/mips/cavium-octeon/octeon-irq.c | 2 -
>> arch/mips/cavium-octeon/octeon-platform.c | 84 -------------------------
>> arch/mips/include/asm/octeon/octeon.h | 5 --
>> drivers/i2c/busses/i2c-octeon.c | 94 ++++++++++++++++-------------
>> 4 files changed, 52 insertions(+), 133 deletions(-)
>
> snip
>
>>
>> - if (i2c_data == NULL) {
>> - dev_err(i2c->dev, "no I2C frequency data\n");
>> + /*
>> + * "clock-rate" is a legacy binding, the official binding is
>> + * "clock-frequency". Try the official one first and then
>> + * fall back if it doesn't exist.
>> + */
>> + data = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
>> + if (!data || len != sizeof(*data))
>> + data = of_get_property(pdev->dev.of_node, "clock-rate", &len);
>> + if (data && len == sizeof(*data)) {
>> + i2c->twsi_freq = be32_to_cpup(data);
>
> Can't you use of_property_read_u32?
>
> Does the legacy binding really exist as DT support is new?
>
> Otherwise,
>
> Acked-by: Rob Herring <rob.herring@calxeda.com>
>
>> + } else {
>> + dev_err(i2c->dev,
>> + "no I2C 'clock-rate' or 'clock-frequency' property\n");
>> result = -ENXIO;
>> - goto fail_region;
>> + goto out;
>> }
>>
>> - i2c->twsi_phys = res_mem->start;
>> - i2c->regsize = resource_size(res_mem);
>> - i2c->twsi_freq = i2c_data->i2c_freq;
>> - i2c->sys_freq = i2c_data->sys_freq;
>> + i2c->sys_freq = octeon_get_io_clock_rate();
>>
>> - if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) {
>> + if (!devm_request_mem_region(&pdev->dev, i2c->twsi_phys, i2c->regsize,
>> + res_mem->name)) {
>> dev_err(i2c->dev, "request_mem_region failed\n");
>> - goto fail_region;
>> + goto out;
>> }
>> - i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize);
>> + i2c->twsi_base = devm_ioremap(&pdev->dev, i2c->twsi_phys, i2c->regsize);
>>
>> init_waitqueue_head(&i2c->queue);
>>
>> i2c->irq = irq;
>>
>> - result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c);
>> + result = devm_request_irq(&pdev->dev, i2c->irq,
>> + octeon_i2c_isr, 0, DRV_NAME, i2c);
>> if (result < 0) {
>> dev_err(i2c->dev, "failed to attach interrupt\n");
>> - goto fail_irq;
>> + goto out;
>> }
>>
>> result = octeon_i2c_initlowlevel(i2c);
>> if (result) {
>> dev_err(i2c->dev, "init low level failed\n");
>> - goto fail_add;
>> + goto out;
>> }
>>
>> result = octeon_i2c_setclock(i2c);
>> if (result) {
>> dev_err(i2c->dev, "clock init failed\n");
>> - goto fail_add;
>> + goto out;
>> }
>>
>> i2c->adap = octeon_i2c_ops;
>> i2c->adap.dev.parent = &pdev->dev;
>> - i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
>> + i2c->adap.dev.of_node = pdev->dev.of_node;
>> i2c_set_adapdata(&i2c->adap, i2c);
>> platform_set_drvdata(pdev, i2c);
>>
>> - result = i2c_add_numbered_adapter(&i2c->adap);
>> + result = i2c_add_adapter(&i2c->adap);
>> if (result < 0) {
>> dev_err(i2c->dev, "failed to add adapter\n");
>> goto fail_add;
>> }
>> -
>> dev_info(i2c->dev, "version %s\n", DRV_VERSION);
>>
>> - return result;
>> + of_i2c_register_devices(&i2c->adap);
>> +
>> + return 0;
>>
>> fail_add:
>> platform_set_drvdata(pdev, NULL);
>> - free_irq(i2c->irq, i2c);
>> -fail_irq:
>> - iounmap(i2c->twsi_base);
>> - release_mem_region(i2c->twsi_phys, i2c->regsize);
>> -fail_region:
>> - kfree(i2c);
>> out:
>> return result;
>> };
>> @@ -613,19 +619,24 @@ static int __devexit octeon_i2c_remove(struct platform_device *pdev)
>>
>> i2c_del_adapter(&i2c->adap);
>> platform_set_drvdata(pdev, NULL);
>> - free_irq(i2c->irq, i2c);
>> - iounmap(i2c->twsi_base);
>> - release_mem_region(i2c->twsi_phys, i2c->regsize);
>> - kfree(i2c);
>> return 0;
>> };
>>
>> +static struct of_device_id octeon_i2c_match[] = {
>> + {
>> + .compatible = "cavium,octeon-3860-twsi",
>> + },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, octeon_i2c_match);
>> +
>> static struct platform_driver octeon_i2c_driver = {
>> .probe = octeon_i2c_probe,
>> .remove = __devexit_p(octeon_i2c_remove),
>> .driver = {
>> .owner = THIS_MODULE,
>> .name = DRV_NAME,
>> + .of_match_table = octeon_i2c_match,
>> },
>> };
>>
>> @@ -635,4 +646,3 @@ MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
>> MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
>> MODULE_LICENSE("GPL");
>> MODULE_VERSION(DRV_VERSION);
>> -MODULE_ALIAS("platform:" DRV_NAME);
>



\
 
 \ /
  Last update: 2012-03-27 03:25    [W:0.051 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site