lkml.org 
[lkml]   [2012]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
Hello Gwendal,

(2012/03/26 09:41), ANEZAKI, Akira wrote:

>> If possible, could you switch 2 of the 4 enclosures [with their disks]
>> that fails to the port controlled by the Sil3132 controller, reboot
>> the machine with all its 30 drives and see if the failures follow the
>> controller or the enclosure.
>
> Yes, I will do it as soon as possible. (Sorry, resyncing is runnning now.)

This is a log when warm reboot is successful. I will try warm reboot
more but I'm fixing RAIDs again.

ata7,ata8 : 4+4=8 HDDs.
ata5,ata6,ata9,ata10 : 5+5+5+5=20 HDDs.

But from log,
ata5: 2 HDDs -- lost 3 HDDs.
ata6: 3 HDDs -- lost 2 HDDs.
ata7: 4 HDDs -- OK.
ata8: 4 HDDs -- OK.
ata9: 3 HDDs -- lost 2 HDDs.
ata10: 4 HDDs -- lost 1 HDD.

Thank you for your help.

Best Regards,
Akira

--- 3.2.10 warm reboot log ( unpatched ) ---
:
> [ 0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
:
> [ 1.589480] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
> [ 1.589484] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
> [ 1.590487] ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
> [ 1.590491] ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
> [ 1.907600] ata4: SATA link down (SStatus 0 SControl 300)
> [ 2.058210] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 2.077498] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
> [ 2.099331] ata3.00: configured for UDMA/100
> [ 2.211895] ata2.00: SATA link down (SStatus 0 SControl 300)
> [ 2.211912] ata2.01: SATA link down (SStatus 0 SControl 300)
> [ 2.362481] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 2.362499] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 2.368859] ata1.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133
> [ 2.368866] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 2.369140] ata1.01: ATA-8: Hitachi HDS721010CLA332, JP4OA39C, max UDMA/133
> [ 2.369147] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 2.374886] ata1.00: configured for UDMA/133
> [ 2.380989] ata1.01: configured for UDMA/133
> [ 2.729560] ata5: SATA max UDMA/100 host m128@0xfbeffc00 port 0xfbef8000 irq 18
> [ 2.729564] ata6: SATA max UDMA/100 host m128@0xfbeffc00 port 0xfbefa000 irq 18
> [ 2.732356] ata7: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff0000 irq 17
> [ 2.732360] ata8: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff2000 irq 17
> [ 2.732364] ata9: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff4000 irq 17
> [ 2.732367] ata10: SATA max UDMA/100 host m128@0xfbfff400 port 0xfbff6000 irq 17
> [ 4.857966] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 4.858355] ata5.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 4.859795] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 4.860189] ata5.00: hard resetting link
> [ 4.860287] ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 4.862439] ata7.00: hard resetting link
> [ 5.265296] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 5.265352] ata7.01: hard resetting link
> [ 5.668362] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 5.668417] ata7.02: hard resetting link
> [ 6.071495] ata7.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 6.071529] ata7.03: hard resetting link
> [ 6.474581] ata7.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 6.474613] ata7.04: hard resetting link
> [ 6.779060] ata7.04: SATA link down (SStatus 0 SControl 320)
> [ 6.779114] ata7.05: hard resetting link
> [ 7.083360] ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 7.084277] ata7.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 7.084286] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 7.085547] ata7.00: configured for UDMA/100
> [ 7.086553] ata7.01: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 7.086559] ata7.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 7.087660] ata7.01: configured for UDMA/100
> [ 7.088553] ata7.02: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 7.088558] ata7.02: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 7.089654] ata7.02: configured for UDMA/100
> [ 7.090546] ata7.03: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 7.090551] ata7.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 7.091650] ata7.03: configured for UDMA/100
> [ 7.091733] ata7: EH complete
> [ 14.844826] ata5.00: softreset failed (timeout)
> [ 17.838181] ata5.15: qc timeout (cmd 0xe4)
> [ 17.838210] ata5.00: failed to read SCR 0 (Emask=0x4)
> [ 17.838214] ata5.00: reset failed, giving up
> [ 17.838219] ata5.15: hard resetting link
> [ 19.965502] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 19.966145] ata5.00: hard resetting link
> [ 29.951336] ata5.00: softreset failed (timeout)
> [ 32.944766] ata5.15: qc timeout (cmd 0xe4)
> [ 32.944795] ata5.00: failed to read SCR 0 (Emask=0x4)
> [ 32.944799] ata5.00: reset failed, giving up
> [ 32.944804] ata5.15: hard resetting link
> [ 35.072012] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 35.072530] ata5.00: hard resetting link
> [ 45.056855] ata5.00: softreset failed (timeout)
> [ 48.050254] ata5.15: qc timeout (cmd 0xe4)
> [ 48.050283] ata5.00: failed to read SCR 0 (Emask=0x4)
> [ 48.050287] ata5.00: reset failed, giving up
> [ 48.050290] ata5.00: failed to recover link after 3 tries, disabling
> [ 48.050295] ata5.15: hard resetting link
> [ 50.177517] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 50.482010] ata5.01: hard resetting link
> [ 50.884985] ata5.01: link resume succeeded after 1 retries
> [ 51.107352] ata5.01: softreset failed (SRST command error)
> [ 51.107487] ata5.01: failed to read SCR 0 (Emask=0x1)
> [ 51.107492] ata5.01: reset failed (errno=-85), retrying in 10 secs
> [ 60.459742] ata5.01: reset failed, giving up
> [ 60.459749] ata5.15: hard resetting link
> [ 60.459752] ata5: controller in dubious state, performing PORT_RST
> [ 62.608949] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 62.914448] ata5.01: hard resetting link
> [ 63.317427] ata5.01: link resume succeeded after 1 retries
> [ 63.539790] ata5.01: softreset failed (SRST command error)
> [ 63.539919] ata5.01: failed to read SCR 0 (Emask=0x1)
> [ 63.539925] ata5.01: reset failed (errno=-85), retrying in 10 secs
> [ 72.892173] ata5.01: reset failed, giving up
> [ 72.892180] ata5.15: hard resetting link
> [ 72.892184] ata5: controller in dubious state, performing PORT_RST
> [ 75.041389] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 75.345889] ata5.01: hard resetting link
> [ 75.748866] ata5.01: link resume succeeded after 1 retries
> [ 75.971297] ata5.01: softreset failed (SRST command error)
> [ 75.971431] ata5.01: failed to read SCR 0 (Emask=0x1)
> [ 75.971437] ata5.01: reset failed (errno=-85), retrying in 10 secs
> [ 85.323630] ata5.01: reset failed, giving up
> [ 85.323637] ata5.01: failed to recover link after 3 tries, disabling
> [ 85.323645] ata5.15: hard resetting link
> [ 85.323650] ata5: controller in dubious state, performing PORT_RST
> [ 87.472842] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 88.181286] ata5.01: link resume succeeded after 1 retries
> [ 88.283133] ata5.02: hard resetting link
> [ 88.686176] ata5.02: link resume succeeded after 1 retries
> [ 88.821104] ata5.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 88.821164] ata5.03: hard resetting link
> [ 89.223975] ata5.03: link resume succeeded after 1 retries
> [ 89.358829] ata5.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 89.358888] ata5.04: hard resetting link
> [ 89.783557] ata5.04: softreset failed (SRST command error)
> [ 89.893432] ata5.04: failed to read SCR 0 (Emask=0x1)
> [ 89.893438] ata5.04: reset failed (errno=-85), retrying in 10 secs
> [ 99.336365] ata5.04: reset failed, giving up
> [ 99.336372] ata5.15: hard resetting link
> [ 99.336376] ata5: controller in dubious state, performing PORT_RST
> [ 101.485757] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 102.193240] ata5.01: link resume succeeded after 1 retries
> [ 102.295073] ata5.02: hard resetting link
> [ 102.698122] ata5.02: link resume succeeded after 1 retries
> [ 102.833073] ata5.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 102.833133] ata5.03: hard resetting link
> [ 103.235928] ata5.03: link resume succeeded after 1 retries
> [ 103.370761] ata5.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 103.370820] ata5.04: hard resetting link
> [ 103.795611] ata5.04: softreset failed (SRST command error)
> [ 103.905366] ata5.04: failed to read SCR 0 (Emask=0x1)
> [ 103.905371] ata5.04: reset failed (errno=-85), retrying in 10 secs
> [ 113.348314] ata5.04: reset failed, giving up
> [ 113.348320] ata5.15: hard resetting link
> [ 113.348324] ata5: controller in dubious state, performing PORT_RST
> [ 115.497700] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 116.205181] ata5.01: link resume succeeded after 1 retries
> [ 116.307080] ata5.02: hard resetting link
> [ 116.710044] ata5.02: link resume succeeded after 1 retries
> [ 116.845018] ata5.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 116.845077] ata5.03: hard resetting link
> [ 117.247869] ata5.03: link resume succeeded after 1 retries
> [ 117.382765] ata5.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 117.382824] ata5.04: hard resetting link
> [ 117.807545] ata5.04: softreset failed (SRST command error)
> [ 117.917306] ata5.04: failed to read SCR 0 (Emask=0x1)
> [ 117.917312] ata5.04: reset failed (errno=-85), retrying in 10 secs
> [ 127.360526] ata5.04: reset failed, giving up
> [ 127.360531] ata5.04: failed to recover link after 3 tries, disabling
> [ 127.360537] ata5.15: hard resetting link
> [ 127.360540] ata5: controller in dubious state, performing PORT_RST
> [ 129.509655] ata5.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 130.217118] ata5.01: link resume succeeded after 1 retries
> [ 130.722001] ata5.04: link resume succeeded after 1 retries
> [ 130.823901] ata5.02: hard resetting link
> [ 131.226876] ata5.02: link resume succeeded after 1 retries
> [ 131.361766] ata5.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 131.361825] ata5.03: hard resetting link
> [ 131.764660] ata5.03: link resume succeeded after 1 retries
> [ 131.899662] ata5.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 131.899721] ata5.05: hard resetting link
> [ 132.205038] ata5.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 132.244958] ata5.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 132.244964] ata5.02: 625142448 sectors, multi 0: LBA48
> [ 132.244970] ata5.02: applying bridge limits
> [ 132.303046] ata5.02: configured for UDMA/100
> [ 132.342980] ata5.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 132.342986] ata5.03: 625142448 sectors, multi 0: LBA48
> [ 132.401061] ata5.03: configured for UDMA/100
> [ 132.401136] ata5: EH complete
> [ 134.530494] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 134.531008] ata6.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 134.532983] ata6.00: hard resetting link
> [ 144.517362] ata6.00: softreset failed (timeout)
> [ 147.510713] ata6.15: qc timeout (cmd 0xe4)
> [ 147.510742] ata6.00: failed to read SCR 0 (Emask=0x5)
> [ 147.510746] ata6.00: reset failed, giving up
> [ 147.510751] ata6.15: hard resetting link
> [ 149.638015] ata6.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 149.638490] ata6.00: hard resetting link
> [ 159.623868] ata6.00: softreset failed (timeout)
> [ 162.617261] ata6.15: qc timeout (cmd 0xe4)
> [ 162.617290] ata6.00: failed to read SCR 0 (Emask=0x5)
> [ 162.617294] ata6.00: reset failed, giving up
> [ 162.617298] ata6.15: hard resetting link
> [ 164.744527] ata6.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 164.745175] ata6.00: hard resetting link
> [ 174.730383] ata6.00: softreset failed (timeout)
> [ 177.723774] ata6.15: qc timeout (cmd 0xe4)
> [ 177.723803] ata6.00: failed to read SCR 0 (Emask=0x5)
> [ 177.723807] ata6.00: reset failed, giving up
> [ 177.723811] ata6.00: failed to recover link after 3 tries, disabling
> [ 177.723816] ata6.15: hard resetting link
> [ 179.851035] ata6.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 180.156552] ata6.01: hard resetting link
> [ 180.559477] ata6.01: link resume succeeded after 1 retries
> [ 180.694563] ata6.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 180.694606] ata6.02: hard resetting link
> [ 181.097289] ata6.02: link resume succeeded after 1 retries
> [ 181.319751] ata6.02: softreset failed (SRST command error)
> [ 181.429509] ata6.02: failed to read SCR 0 (Emask=0x1)
> [ 181.429515] ata6.02: reset failed (errno=-85), retrying in 10 secs
> [ 190.672324] ata6.02: reset failed, giving up
> [ 190.672330] ata6.15: hard resetting link
> [ 190.672334] ata6: controller in dubious state, performing PORT_RST
> [ 192.821300] ata6.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 193.125786] ata6.01: hard resetting link
> [ 193.528727] ata6.01: link resume succeeded after 1 retries
> [ 193.663686] ata6.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 193.663812] ata6.02: hard resetting link
> [ 194.066567] ata6.02: link resume succeeded after 1 retries
> [ 194.288962] ata6.02: softreset failed (SRST command error)
> [ 194.398756] ata6.02: failed to read SCR 0 (Emask=0x1)
> [ 194.398762] ata6.02: reset failed (errno=-85), retrying in 10 secs
> [ 203.641295] ata6.02: reset failed, giving up
> [ 203.641303] ata6.15: hard resetting link
> [ 203.641309] ata6: controller in dubious state, performing PORT_RST
> [ 205.790546] ata6.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 206.094966] ata6.01: hard resetting link
> [ 206.498015] ata6.01: link resume succeeded after 1 retries
> [ 206.633061] ata6.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 206.633120] ata6.02: hard resetting link
> [ 207.035819] ata6.02: link resume succeeded after 1 retries
> [ 207.258245] ata6.02: softreset failed (SRST command error)
> [ 207.368006] ata6.02: failed to read SCR 0 (Emask=0x1)
> [ 207.368012] ata6.02: reset failed (errno=-85), retrying in 10 secs
> [ 216.610620] ata6.02: reset failed, giving up
> [ 216.610626] ata6.02: failed to recover link after 3 tries, disabling
> [ 216.610632] ata6.15: hard resetting link
> [ 216.610635] ata6: controller in dubious state, performing PORT_RST
> [ 218.759779] ata6.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 219.467254] ata6.02: link resume succeeded after 1 retries
> [ 219.569163] ata6.01: hard resetting link
> [ 219.972113] ata6.01: link resume succeeded after 1 retries
> [ 220.107129] ata6.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 220.107188] ata6.03: hard resetting link
> [ 220.509917] ata6.03: link resume succeeded after 1 retries
> [ 220.644966] ata6.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 220.645026] ata6.04: hard resetting link
> [ 221.047757] ata6.04: link resume succeeded after 1 retries
> [ 221.182778] ata6.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 221.182837] ata6.05: hard resetting link
> [ 221.487112] ata6.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 221.526612] ata6.01: ATA-7: ST3320620A, 3.AAC, max UDMA/100
> [ 221.526618] ata6.01: 625142448 sectors, multi 0: LBA48
> [ 221.584762] ata6.01: configured for UDMA/100
> [ 221.631071] ata6.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 221.631077] ata6.03: 625142448 sectors, multi 0: LBA48
> [ 221.689230] ata6.03: configured for UDMA/100
> [ 221.727356] ata6.04: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 221.727362] ata6.04: 625142448 sectors, multi 0: LBA48
> [ 221.785541] ata6.04: configured for UDMA/100
> [ 221.785615] ata6: EH complete
> [ 223.918343] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 223.918775] ata8.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 223.921937] ata8.00: hard resetting link
> [ 224.259862] ata8.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 224.259917] ata8.01: hard resetting link
> [ 224.597085] ata8.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 224.597141] ata8.02: hard resetting link
> [ 224.934516] ata8.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 224.934572] ata8.03: hard resetting link
> [ 225.271591] ata8.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 225.271624] ata8.04: hard resetting link
> [ 225.575989] ata8.04: SATA link down (SStatus 0 SControl 320)
> [ 225.576042] ata8.05: hard resetting link
> [ 225.880279] ata8.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 225.909034] ata8.00: ATA-8: ST31000333AS, SD15, max UDMA/133
> [ 225.909041] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (not used)
> [ 225.909047] ata8.00: WARNING: device requires firmware update to be fully functional
> [ 225.909051] ata8.00: contact the vendor or visit http://ata.wiki.kernel.org
> [ 225.950939] ata8.00: configured for UDMA/100
> [ 225.979588] ata8.01: ATA-8: ST31000333AS, SD15, max UDMA/133
> [ 225.979594] ata8.01: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
> [ 225.979600] ata8.01: WARNING: device requires firmware update to be fully functional
> [ 225.979604] ata8.01: contact the vendor or visit http://ata.wiki.kernel.org
> [ 226.021473] ata8.01: configured for UDMA/100
> [ 226.050141] ata8.02: ATA-8: ST31000333AS, SD15, max UDMA/133
> [ 226.050147] ata8.02: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
> [ 226.050154] ata8.02: WARNING: device requires firmware update to be fully functional
> [ 226.050158] ata8.02: contact the vendor or visit http://ata.wiki.kernel.org
> [ 226.091995] ata8.02: configured for UDMA/100
> [ 226.120548] ata8.03: ATA-8: ST31000333AS, SD15, max UDMA/133
> [ 226.120554] ata8.03: 1953525168 sectors, multi 0: LBA48 NCQ (not used)
> [ 226.120561] ata8.03: WARNING: device requires firmware update to be fully functional
> [ 226.120565] ata8.03: contact the vendor or visit http://ata.wiki.kernel.org
> [ 226.162385] ata8.03: configured for UDMA/100
> [ 226.162453] ata8: EH complete
> [ 228.292632] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 228.293002] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 228.296050] ata9.00: hard resetting link
> [ 238.280486] ata9.00: softreset failed (timeout)
> [ 241.274023] ata9.15: qc timeout (cmd 0xe4)
> [ 241.274040] ata9.00: failed to read SCR 0 (Emask=0x5)
> [ 241.274044] ata9.00: reset failed, giving up
> [ 241.274049] ata9.15: hard resetting link
> [ 243.401137] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 243.401599] ata9.00: hard resetting link
> [ 253.387991] ata9.00: softreset failed (timeout)
> [ 256.381414] ata9.15: qc timeout (cmd 0xe4)
> [ 256.381430] ata9.00: failed to read SCR 0 (Emask=0x5)
> [ 256.381434] ata9.00: reset failed, giving up
> [ 256.381439] ata9.15: hard resetting link
> [ 258.508673] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 258.509048] ata9.00: hard resetting link
> [ 268.494505] ata9.00: softreset failed (timeout)
> [ 271.487878] ata9.15: qc timeout (cmd 0xe4)
> [ 271.487895] ata9.00: failed to read SCR 0 (Emask=0x5)
> [ 271.487899] ata9.00: reset failed, giving up
> [ 271.487903] ata9.00: failed to recover link after 3 tries, disabling
> [ 271.487908] ata9.15: hard resetting link
> [ 273.615201] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 273.919608] ata9.01: hard resetting link
> [ 274.322603] ata9.01: link resume succeeded after 1 retries
> [ 274.457553] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 274.457586] ata9.02: hard resetting link
> [ 274.860444] ata9.02: link resume succeeded after 1 retries
> [ 274.995367] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 274.995400] ata9.03: hard resetting link
> [ 275.398299] ata9.03: link resume succeeded after 1 retries
> [ 275.533164] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 275.533197] ata9.04: hard resetting link
> [ 275.936074] ata9.04: link resume succeeded after 1 retries
> [ 276.158501] ata9.04: softreset failed (SRST command error)
> [ 276.268262] ata9.04: failed to read SCR 0 (Emask=0x1)
> [ 276.268268] ata9.04: reset failed (errno=-85), retrying in 10 secs
> [ 285.510770] ata9.04: reset failed, giving up
> [ 285.510776] ata9.15: hard resetting link
> [ 285.510780] ata9: controller in dubious state, performing PORT_RST
> [ 287.660034] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 287.964508] ata9.01: hard resetting link
> [ 288.367491] ata9.01: link resume succeeded after 1 retries
> [ 288.502430] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 288.502463] ata9.02: hard resetting link
> [ 288.905305] ata9.02: link resume succeeded after 1 retries
> [ 289.040255] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 289.040288] ata9.03: hard resetting link
> [ 289.443108] ata9.03: link resume succeeded after 1 retries
> [ 289.578057] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 289.578090] ata9.04: hard resetting link
> [ 289.980918] ata9.04: link resume succeeded after 1 retries
> [ 290.203369] ata9.04: softreset failed (SRST command error)
> [ 290.203485] ata9.04: failed to read SCR 0 (Emask=0x1)
> [ 290.203491] ata9.04: reset failed (errno=-85), retrying in 10 secs
> [ 299.555660] ata9.04: reset failed, giving up
> [ 299.555666] ata9.15: hard resetting link
> [ 299.555670] ata9: controller in dubious state, performing PORT_RST
> [ 301.704918] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 302.009409] ata9.01: hard resetting link
> [ 302.412365] ata9.01: link resume succeeded after 1 retries
> [ 302.547281] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 302.547314] ata9.02: hard resetting link
> [ 302.950171] ata9.02: link resume succeeded after 1 retries
> [ 303.085117] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 303.085150] ata9.03: hard resetting link
> [ 303.487982] ata9.03: link resume succeeded after 1 retries
> [ 303.622902] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 303.622958] ata9.04: hard resetting link
> [ 304.025789] ata9.04: link resume succeeded after 1 retries
> [ 304.138473] ata9.04: softreset failed (SRST command error)
> [ 304.248235] ata9.04: failed to read SCR 0 (Emask=0x1)
> [ 304.248241] ata9.04: reset failed (errno=-85), retrying in 10 secs
> [ 313.600501] ata9.04: reset failed, giving up
> [ 313.600507] ata9.04: failed to recover link after 3 tries, disabling
> [ 313.600513] ata9.15: hard resetting link
> [ 313.600516] ata9: controller in dubious state, performing PORT_RST
> [ 315.749752] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 316.457271] ata9.04: link resume succeeded after 1 retries
> [ 316.559076] ata9.01: hard resetting link
> [ 316.962068] ata9.01: link resume succeeded after 1 retries
> [ 317.097054] ata9.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 317.097088] ata9.02: hard resetting link
> [ 317.499918] ata9.02: link resume succeeded after 1 retries
> [ 317.634858] ata9.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 317.634914] ata9.03: hard resetting link
> [ 318.037724] ata9.03: link resume succeeded after 1 retries
> [ 318.172660] ata9.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 318.172693] ata9.05: hard resetting link
> [ 318.477013] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 318.516456] ata9.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 318.516462] ata9.01: 625142448 sectors, multi 0: LBA48
> [ 318.516468] ata9.01: applying bridge limits
> [ 318.574613] ata9.01: configured for UDMA/100
> [ 318.619314] ata9.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 318.619320] ata9.02: 625142448 sectors, multi 0: LBA48
> [ 318.619326] ata9.02: applying bridge limits
> [ 318.677370] ata9.02: configured for UDMA/100
> [ 318.722829] ata9.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 318.722835] ata9.03: 625142448 sectors, multi 0: LBA48
> [ 318.722841] ata9.03: applying bridge limits
> [ 318.780997] ata9.03: configured for UDMA/100
> [ 318.781065] ata9: EH complete
> [ 320.910331] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 320.910716] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 320.914444] ata10.00: hard resetting link
> [ 330.899026] ata10.00: softreset failed (timeout)
> [ 333.892559] ata10.15: qc timeout (cmd 0xe4)
> [ 333.892575] ata10.00: failed to read SCR 0 (Emask=0x5)
> [ 333.892579] ata10.00: reset failed, giving up
> [ 333.892584] ata10.15: hard resetting link
> [ 336.019804] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 336.020217] ata10.00: hard resetting link
> [ 346.005672] ata10.00: softreset failed (timeout)
> [ 348.999080] ata10.15: qc timeout (cmd 0xe4)
> [ 348.999097] ata10.00: failed to read SCR 0 (Emask=0x5)
> [ 348.999101] ata10.00: reset failed, giving up
> [ 348.999106] ata10.15: hard resetting link
> [ 351.126351] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 351.126798] ata10.00: hard resetting link
> [ 361.111185] ata10.00: softreset failed (timeout)
> [ 364.104592] ata10.15: qc timeout (cmd 0xe4)
> [ 364.104608] ata10.00: failed to read SCR 0 (Emask=0x5)
> [ 364.104613] ata10.00: reset failed, giving up
> [ 364.104616] ata10.00: failed to recover link after 3 tries, disabling
> [ 364.104621] ata10.15: hard resetting link
> [ 366.231861] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 366.536337] ata10.01: hard resetting link
> [ 366.939336] ata10.01: link resume succeeded after 1 retries
> [ 367.074226] ata10.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 367.074260] ata10.02: hard resetting link
> [ 367.477128] ata10.02: link resume succeeded after 1 retries
> [ 367.612045] ata10.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 367.612079] ata10.03: hard resetting link
> [ 368.014946] ata10.03: link resume succeeded after 1 retries
> [ 368.149882] ata10.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 368.149916] ata10.04: hard resetting link
> [ 368.552715] ata10.04: link resume succeeded after 1 retries
> [ 368.687685] ata10.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 368.687740] ata10.05: hard resetting link
> [ 368.992079] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 369.039408] ata10.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 369.039414] ata10.01: 625142448 sectors, multi 0: LBA48
> [ 369.097549] ata10.01: configured for UDMA/100
> [ 369.134364] ata10.02: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 369.134370] ata10.02: 625142448 sectors, multi 0: LBA48
> [ 369.192501] ata10.02: configured for UDMA/100
> [ 369.231060] ata10.03: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 369.231066] ata10.03: 625142448 sectors, multi 0: LBA48
> [ 369.289253] ata10.03: configured for UDMA/100
> [ 369.328511] ata10.04: ATA-7: ST3320620A, 3.AAD, max UDMA/100
> [ 369.328517] ata10.04: 625142448 sectors, multi 0: LBA48
> [ 369.386487] ata10.04: configured for UDMA/100
> [ 369.386557] ata10: EH complete
:
> [ 394.946096] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 395.043631] NFSD: starting 90-second grace period
:
------

\
 
 \ /
  Last update: 2012-03-26 04:33    [from the cache]
©2003-2011 Jasper Spaans