lkml.org 
[lkml]   [2012]   [Mar]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/5] Input: sentelic - enabling absolute coordinates output for newer hardware
Date
- Hooking multi-finger coordinates output with kernel multitouch library;
- Enabling absolute coordinates output for Cx+ hardware. The older hardware
performs much better in relative mode; thus relative mode related code
are preserved.

Part of the code is based on the work done by Oskari Saarenmaa <os@ohmu.fi>,
which was used to support the clickpad found on ASUS UX21/31 Ultrabook.
On the other hand, the FSP found on UX21/31 doesn't have hardware capability
register other than PnP ID, which means that we'll have to figure out an
alternative approach to identify such pad correctly; otherwise, blindly
adding INPUT_PROP_BUTTONPAD property may compatability issues amongst
existing FSPs.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
---
drivers/input/mouse/sentelic.c | 114 ++++++++++++++++++++++++++++++++++++++-
drivers/input/mouse/sentelic.h | 22 +++++++-
2 files changed, 132 insertions(+), 4 deletions(-)
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index 0ce090b..43d839a 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -2,7 +2,7 @@
* Finger Sensing Pad PS/2 mouse driver.
*
* Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -21,6 +21,7 @@

#include <linux/module.h>
#include <linux/input.h>
+#include <linux/input/mt.h>
#include <linux/ctype.h>
#include <linux/libps2.h>
#include <linux/serio.h>
@@ -644,12 +645,24 @@ static void fsp_packet_debug(unsigned char packet[])
}
#endif

+static void fsp_set_slot(struct input_dev *dev, int slot, bool active,
+ unsigned int x, unsigned int y)
+{
+ input_mt_slot(dev, slot);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+ if (active) {
+ input_report_abs(dev, ABS_MT_POSITION_X, x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, y);
+ }
+}
+
static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct fsp_data *ad = psmouse->private;
unsigned char *packet = psmouse->packet;
unsigned char button_status = 0, lscroll = 0, rscroll = 0;
+ unsigned short abs_x, abs_y, fgrs = 0;
int rel_x, rel_y;

if (psmouse->pktcnt < 4)
@@ -661,8 +674,66 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse)

switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) {
case FSP_PKT_TYPE_ABS:
- dev_warn(&psmouse->ps2dev.serio->dev,
- "Unexpected absolute mode packet, ignored.\n");
+ abs_x = (packet[1] << 2) | ((packet[3] >> 2) & 0x03);
+ abs_y = (packet[2] << 2) | (packet[3] & 0x03);
+
+ if (packet[0] & FSP_PB0_MFMC) {
+ /*
+ * MFMC packet: assume that there are two fingers on
+ * pad
+ */
+ fgrs = 2;
+
+ /* MFMC packet */
+ if (packet[0] & FSP_PB0_MFMC_FGR2) {
+ /* 2nd finger */
+ if (ad->last_mt_fgr == 2) {
+ /*
+ * workaround for buggy firmware
+ * which doesn't clear MFMC bit if
+ * the 1st finger is up
+ */
+ fgrs = 1;
+ fsp_set_slot(dev, 0, false, 0, 0);
+ }
+ ad->last_mt_fgr = 2;
+
+ fsp_set_slot(dev, 1, fgrs == 2, abs_x, abs_y);
+ } else {
+ /* 1st finger */
+ if (ad->last_mt_fgr == 1) {
+ /*
+ * workaround for buggy firmware
+ * which doesn't clear MFMC bit if
+ * the 2nd finger is up
+ */
+ fgrs = 1;
+ fsp_set_slot(dev, 1, false, 0, 0);
+ }
+ ad->last_mt_fgr = 1;
+ fsp_set_slot(dev, 0, fgrs != 0, abs_x, abs_y);
+ }
+ } else {
+ /* SFAC packet */
+
+ /* no multi-finger information */
+ ad->last_mt_fgr = 0;
+
+ if (abs_x != 0 && abs_y != 0)
+ fgrs = 1;
+
+ fsp_set_slot(dev, 0, fgrs > 0, abs_x, abs_y);
+ fsp_set_slot(dev, 1, false, 0, 0);
+ }
+ if (fgrs > 0) {
+ input_report_abs(dev, ABS_X, abs_x);
+ input_report_abs(dev, ABS_Y, abs_y);
+ }
+ input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
+ input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_report_key(dev, BTN_TOUCH, fgrs);
+ input_report_key(dev, BTN_TOOL_FINGER, fgrs == 1);
+ input_report_key(dev, BTN_TOOL_DOUBLETAP, fgrs == 2);
break;

case FSP_PKT_TYPE_NORMAL_OPC:
@@ -786,6 +857,17 @@ static int fsp_activate_protocol(struct psmouse *psmouse)
/* Enable on-pad vertical and horizontal scrolling */
fsp_onpad_vscr(psmouse, true);
fsp_onpad_hscr(psmouse, true);
+ } else {
+ /* Enable absolute coordinates output for Cx/Dx hardware */
+ if (fsp_reg_write(psmouse, FSP_REG_SWC1,
+ FSP_BIT_SWC1_EN_ABS_1F |
+ FSP_BIT_SWC1_EN_ABS_2F |
+ FSP_BIT_SWC1_EN_FUP_OUT |
+ FSP_BIT_SWC1_EN_ABS_CON)) {
+ dev_err(&psmouse->ps2dev.serio->dev,
+ "Unable to enable absolute coordinates output.\n");
+ return -EIO;
+ }
}

return 0;
@@ -802,6 +884,32 @@ static int fsp_set_input_params(struct psmouse *psmouse)
__set_bit(BTN_FORWARD, dev->keybit);
__set_bit(REL_WHEEL, dev->relbit);
__set_bit(REL_HWHEEL, dev->relbit);
+ } else {
+ /*
+ * Hardware prior to Cx performs much better in relative mode;
+ * hence, only enable absolute coordinates output as well as
+ * multi-touch output for the newer hardware.
+ *
+ * Maximum coordinates can be computed as:
+ *
+ * number of scanlines * 64 - 57
+ *
+ * where number of X/Y scanline lines are 16/12.
+ */
+ int abs_x = 967, abs_y = 711;
+
+ __set_bit(EV_ABS, dev->evbit);
+ __clear_bit(EV_REL, dev->evbit);
+ __set_bit(BTN_TOUCH, dev->keybit);
+ __set_bit(BTN_TOOL_FINGER, dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, dev->keybit);
+ __set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+
+ input_set_abs_params(dev, ABS_X, 0, abs_x, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, abs_y, 0, 0);
+ input_mt_init_slots(dev, 2);
+ input_set_abs_params(dev, ABS_MT_POSITION_X, 0, abs_x, 0, 0);
+ input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, abs_y, 0, 0);
}

return 0;
diff --git a/drivers/input/mouse/sentelic.h b/drivers/input/mouse/sentelic.h
index 23bd25e..334de19 100644
--- a/drivers/input/mouse/sentelic.h
+++ b/drivers/input/mouse/sentelic.h
@@ -2,7 +2,7 @@
* Finger Sensing Pad PS/2 mouse driver.
*
* Copyright (C) 2005-2007 Asia Vital Components Co., Ltd.
- * Copyright (C) 2005-2011 Tai-hwa Liang, Sentelic Corporation.
+ * Copyright (C) 2005-2012 Tai-hwa Liang, Sentelic Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -55,6 +55,16 @@
#define FSP_BIT_FIX_HSCR BIT(5)
#define FSP_BIT_DRAG_LOCK BIT(6)

+#define FSP_REG_SWC1 (0x90)
+#define FSP_BIT_SWC1_EN_ABS_1F BIT(0)
+#define FSP_BIT_SWC1_EN_GID BIT(1)
+#define FSP_BIT_SWC1_EN_ABS_2F BIT(2)
+#define FSP_BIT_SWC1_EN_FUP_OUT BIT(3)
+#define FSP_BIT_SWC1_EN_ABS_CON BIT(4)
+#define FSP_BIT_SWC1_GST_GRP0 BIT(5)
+#define FSP_BIT_SWC1_GST_GRP1 BIT(6)
+#define FSP_BIT_SWC1_BX_COMPAT BIT(7)
+
/* Finger-sensing Pad packet formating related definitions */

/* absolute packet type */
@@ -64,6 +74,15 @@
#define FSP_PKT_TYPE_NORMAL_OPC (0x03)
#define FSP_PKT_TYPE_SHIFT (6)

+/* bit definitions for the first byte of report packet */
+#define FSP_PB0_LBTN BIT(0)
+#define FSP_PB0_RBTN BIT(1)
+#define FSP_PB0_MBTN BIT(2)
+#define FSP_PB0_MFMC_FGR2 FSP_PB0_MBTN
+#define FSP_PB0_MUST_SET BIT(3)
+#define FSP_PB0_PHY_BTN BIT(4)
+#define FSP_PB0_MFMC BIT(5)
+
/* hardware revisions */
#define FSP_VER_STL3888_A4 (0xC1)
#define FSP_VER_STL3888_B0 (0xD0)
@@ -89,6 +108,7 @@ struct fsp_data {

unsigned char last_reg; /* Last register we requested read from */
unsigned char last_val;
+ unsigned int last_mt_fgr; /* Last seen finger(multitouch) */
};

#ifdef CONFIG_MOUSE_PS2_SENTELIC
--
1.7.9.1


\
 
 \ /
  Last update: 2012-03-23 05:03    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site