lkml.org 
[lkml]   [2012]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 4/4] powerpc: Board support for GE IMP3A
From
Date

On Mar 12, 2012, at 12:13 PM, Martyn Welch wrote:

> Initial board support for the GE IMP3A, a 3U compactPCI card with a p2020
> processor.
>
> Signed-off-by: Martyn Welch <martyn.welch@ge.com>
> ---
>
> v2: Rebase patch onto powerpc/next, taking work by Kyle Moffett into
> account.
>
> v3: Correct detection of interrupt controller.
>
> arch/powerpc/boot/dts/ge_imp3a.dts | 255 ++++++++++++++++++++++++++++++
> arch/powerpc/configs/ge_imp3a_defconfig | 257 +++++++++++++++++++++++++++++++
> arch/powerpc/platforms/85xx/Kconfig | 15 ++
> arch/powerpc/platforms/85xx/Makefile | 1 +
> arch/powerpc/platforms/85xx/ge_imp3a.c | 246 +++++++++++++++++++++++++++++
> drivers/gpio/gpio-ge.c | 28 ++++
> 6 files changed, 802 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/ge_imp3a.dts
> create mode 100644 arch/powerpc/configs/ge_imp3a_defconfig
> create mode 100644 arch/powerpc/platforms/85xx/ge_imp3a.c

applied, moved defconfig to configs/85xx/

- k

\
 
 \ /
  Last update: 2012-03-16 17:23    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site