lkml.org 
[lkml]   [2012]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 10/10] ARM: OMAP: SmartReflex: Move smartreflex driver to drivers/
Date
On Thursday, March 15, 2012, jean.pihet@newoldbits.com wrote:
> From: Jean Pihet <j-pihet@ti.com>
>
> After a clean-up of the interfaces the OMAP IP driver and class
> support code is now a generic driver.
> Move it to drivers/power/avs/.
>
> The build is controlled by the following Kconfig options:
> . CONFIG_POWER_AVS: general knob for Adaptive Voltage Scaling support,
> . CONFIG_POWER_AVS_OMAP: AVS support on OMAP containing the version 1
> or version 2 of the SmartReflex IP,
> . CONFIG_POWER_AVS_OMAP_CLASS3: Class 3 implementation of Smartreflex.
>
> Signed-off-by: Jean Pihet <j-pihet@ti.com>
> ---
[...]
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index e429008..e4a8fd2 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -41,3 +41,5 @@ obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
> obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
> obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
> obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
> +
> +obj-$(CONFIG_POWER_AVS) += avs/
> diff --git a/drivers/power/avs/Kconfig b/drivers/power/avs/Kconfig
> new file mode 100644
> index 0000000..35b21c4
> --- /dev/null
> +++ b/drivers/power/avs/Kconfig
> @@ -0,0 +1,45 @@
> +menuconfig POWER_AVS
> + tristate "Adaptive Voltage Scaling class support"
> + help
> + AVS is a power management technique which finely controls the
> + operating voltage of a device in order to optimize (i.e. reduce)
> + its power consumption.
> + At a given operating point the voltage is adapted depending on
> + static factors (chip manufacturing process) and dynamic factors
> + (temperature depending performance).
> + AVS is also called SmartReflex on OMAP devices.
> +
> + Say Y here to enable Adaptive Voltage Scaling class support.
> +
> +if POWER_AVS
> +
> +config POWER_AVS_OMAP

I think it would be better to keep this and the next one in the OMAP
arch Kconfig.

> + bool "AVS support for the OMAP IP versions 1&2"
> + depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
> + help
> + Say Y to enable AVS support on OMAP containing the version 1 or
> + version 2 of the SmartReflex IP.
> + V1 is the 65nm version used in OMAP3430.
> + V2 is the update for the 45nm version of the IP used in OMAP3630
> + and OMAP4430
> +
> + Please note, that by default SmartReflex is only
> + initialized and not enabled. To enable the automatic voltage
> + compensation for vdd mpu and vdd core from user space,
> + user must write 1 to
> + /debug/smartreflex/sr_<X>/autocomp,
> + where X is mpu_iva or core for OMAP3.
> + Optionally autocompensation can be enabled in the kernel
> + by default during system init via the enable_on_init flag
> + which an be passed as platform data to the smartreflex driver.
> +
> +config POWER_AVS_OMAP_CLASS3
> + bool "Class 3 mode of Smartreflex Implementation"
> + depends on POWER_AVS_OMAP && TWL4030_CORE
> + help
> + Say Y to enable Class 3 implementation of Smartreflex
> +
> + Class 3 implementation of Smartreflex employs continuous hardware
> + voltage calibration.
> +
> +endif # POWER_AVS

Thanks,
Rafael


\
 
 \ /
  Last update: 2012-03-15 22:17    [W:0.077 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site