lkml.org 
[lkml]   [2012]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [V5 PATCH 2/4] drivers-gpu-drm-i915-panel-invert-brightness-via-parameter.patch
Date
On Thu, 15 Mar 2012 15:56:25 +0100, Carsten Emde <C.Emde@osadl.org> wrote:
> Following the documentation of the Legacy Backlight Brightness (LBB)
> Register in the configuration space of some Intel PCI graphics adapters,
> setting the LBB register with the value 0x0 causes the backlight to be
> turned off, and 0xFF causes the backlight to be set to 100% intensity
> (http://download.intel.com/embedded/processors/Whitepaper/324567.pdf).
> The Acer Aspire 5734Z, however, turns the backlight off at 0xFF and sets
> it to maximum intensity at 0. In consequence, the screen of this systems
> becomes dark at an early boot stage which makes it unusable. The same
> inversion applies to the BLC_PWM_CTL I915 register. This problem was
> introduced in kernel version 2.6.38 when the PCI device of this system
> was first supported by the i915 KMS module.
>
> This patch adds a parameter to the i915 module to enable inversion of
> the brightness variable (i915.invert_brightness).
>
> Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
-Chris

--
Chris Wilson, Intel Open Source Technology Centre


\
 
 \ /
  Last update: 2012-03-15 16:17    [W:0.058 / U:1.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site