lkml.org 
[lkml]   [2012]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iommu/amd: Split amd_iommu_init function
Date
The hardware-initializtion part of the AMD IOMMU driver is
split out into a seperate function. This function can now be
called either from amd_iommu_init() itself or any other
place if the hardware needs to be ready earlier. This will
be used to implement interrupt remapping for AMD.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
drivers/iommu/amd_iommu_init.c | 123 +++++++++++++++++++++++++--------------
include/linux/amd-iommu.h | 2 +-
2 files changed, 80 insertions(+), 45 deletions(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index bdea288..75653da 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1424,10 +1424,40 @@ static struct syscore_ops amd_iommu_syscore_ops = {
.resume = amd_iommu_resume,
};

+static void __init free_on_init_error(void)
+{
+ amd_iommu_uninit_devices();
+
+ free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
+ get_order(MAX_DOMAIN_ID/8));
+
+ free_pages((unsigned long)amd_iommu_rlookup_table,
+ get_order(rlookup_table_size));
+
+ free_pages((unsigned long)amd_iommu_alias_table,
+ get_order(alias_table_size));
+
+ free_pages((unsigned long)amd_iommu_dev_table,
+ get_order(dev_table_size));
+
+ free_iommu_all();
+
+ free_unity_maps();
+
+#ifdef CONFIG_GART_IOMMU
+ /*
+ * We failed to initialize the AMD IOMMU - try fallback to GART
+ * if possible.
+ */
+ gart_iommu_init();
+
+#endif
+}
+
/*
- * This is the core init function for AMD IOMMU hardware in the system.
- * This function is called from the generic x86 DMA layer initialization
- * code.
+ * This is the hardware init function for AMD IOMMU in the system.
+ * This function is called either from amd_iommu_init or from the interrupt
+ * remapping setup code.
*
* This function basically parses the ACPI table for AMD IOMMU (IVRS)
* three times:
@@ -1446,16 +1476,21 @@ static struct syscore_ops amd_iommu_syscore_ops = {
* remapping requirements parsed out of the ACPI table in
* this last pass.
*
- * After that the hardware is initialized and ready to go. In the last
- * step we do some Linux specific things like registering the driver in
- * the dma_ops interface and initializing the suspend/resume support
- * functions. Finally it prints some information about AMD IOMMUs and
- * the driver state and enables the hardware.
+ * After everything is set up the IOMMUs are enabled and the necessary
+ * hotplug and suspend notifiers are registered.
*/
-static int __init amd_iommu_init(void)
+int __init amd_iommu_init_hardware(void)
{
int i, ret = 0;

+ if (!amd_iommu_detected)
+ return -ENODEV;
+
+ if (amd_iommu_dev_table != NULL) {
+ /* Hardware already initialized */
+ return 0;
+ }
+
/*
* First parse ACPI tables to find the largest Bus/Dev/Func
* we need to handle. Upon this information the shared data
@@ -1472,9 +1507,8 @@ static int __init amd_iommu_init(void)
alias_table_size = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);

- ret = -ENOMEM;
-
/* Device table - directly used by all IOMMUs */
+ ret = -ENOMEM;
amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
get_order(dev_table_size));
if (amd_iommu_dev_table == NULL)
@@ -1546,20 +1580,46 @@ static int __init amd_iommu_init(void)

enable_iommus();

+ amd_iommu_init_notifier();
+
+ register_syscore_ops(&amd_iommu_syscore_ops);
+
+out:
+ return ret;
+
+free:
+ free_on_init_error();
+
+ return ret;
+}
+
+/*
+ * This is the core init function for AMD IOMMU hardware in the system.
+ * This function is called from the generic x86 DMA layer initialization
+ * code.
+ *
+ * The function calls amd_iommu_init_hardware() to setup and enable the
+ * IOMMU hardware if this has not happened yet. After that the driver
+ * registers for the DMA-API and for the IOMMU-API as necessary.
+ */
+static int __init amd_iommu_init(void)
+{
+ int ret = 0;
+
+ ret = amd_iommu_init_hardware();
+ if (ret)
+ goto out;
+
if (iommu_pass_through)
ret = amd_iommu_init_passthrough();
else
ret = amd_iommu_init_dma_ops();

if (ret)
- goto free_disable;
+ goto free;

amd_iommu_init_api();

- amd_iommu_init_notifier();
-
- register_syscore_ops(&amd_iommu_syscore_ops);
-
if (iommu_pass_through)
goto out;

@@ -1569,39 +1629,14 @@ static int __init amd_iommu_init(void)
printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");

x86_platform.iommu_shutdown = disable_iommus;
+
out:
return ret;

-free_disable:
- disable_iommus();
-
free:
- amd_iommu_uninit_devices();
-
- free_pages((unsigned long)amd_iommu_pd_alloc_bitmap,
- get_order(MAX_DOMAIN_ID/8));
-
- free_pages((unsigned long)amd_iommu_rlookup_table,
- get_order(rlookup_table_size));
-
- free_pages((unsigned long)amd_iommu_alias_table,
- get_order(alias_table_size));
-
- free_pages((unsigned long)amd_iommu_dev_table,
- get_order(dev_table_size));
-
- free_iommu_all();
-
- free_unity_maps();
-
-#ifdef CONFIG_GART_IOMMU
- /*
- * We failed to initialize the AMD IOMMU - try fallback to GART
- * if possible.
- */
- gart_iommu_init();
+ disable_iommus();

-#endif
+ free_on_init_error();

goto out;
}
diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h
index ef00610..15f6b9e 100644
--- a/include/linux/amd-iommu.h
+++ b/include/linux/amd-iommu.h
@@ -28,7 +28,7 @@ struct task_struct;
struct pci_dev;

extern int amd_iommu_detect(void);
-
+extern int amd_iommu_init_hardware(void);

/**
* amd_iommu_enable_device_erratum() - Enable erratum workaround for device
--
1.7.5.4



\
 
 \ /
  Last update: 2012-03-01 16:11    [W:0.147 / U:25.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site