lkml.org 
[lkml]   [2012]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Question about error from xhci-hcd
On 02/07/12 08:30, Larry Finger wrote:
> On 02/06/2012 11:47 PM, Richard Farina wrote:
>> I apologize but I am having the same issue reported in this thread in
>> December
>>
>> [ 5077.573181] xhci_hcd 0000:0a:00.0: ERROR no room on ep ring
>>
>> I saw no resolution on this issue so I figured I'd step up and see if
>> you needed an active tester who could reproduce the issue.
>>
>> I am running Gentoo with a 3.2.2 kernel. I am able to run any kernel
>> version you need, including random git trees and custom patches. If you
>> have not solved this yet, please allow me to be your test monkey. If you
>> have solved this already then sorry for harming the signal to noise
>> ratio, I could not a find a later message then the one below.
>
> Are the "no room" messages triggered by rtl8192cu, or some other driver?
>
rtl8187 and rt2800usb both seem to reliably trigger that message on my
system. And when I say reliably I mean by the time I noticed I had a
1.5GB /var/log/messages. Fortunately I have several usb2 ports in
addition to the affected usb3 ports. :-)

-Rick
> Larry
>
>
>



\
 
 \ /
  Last update: 2012-02-07 16:03    [W:0.072 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site