lkml.org 
[lkml]   [2012]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[2.6.32+drm33-longterm] Linux 2.6.32.56+drm33.21
Date
I am announcing the release of the 2.6.32.56+drm33.21 longterm tree.

This tree is based on 2.6.32 and generally has all of the stable updates
applied. Except those to the DRM subsystem, which was based on 2.6.33 and
took updates from that upstream stable as long as that existed. It will
continue to add patches to the DRM subsystem as long as they are valid
according to the stable update rules (Documentation/stable_kernel_rules.txt).
DRM patches for this tree should be sent to kernel-team@lists.ubuntu.com.

This release contains patches from upstream 2.6.32.56, but dropped any patches
to the DRM subsystem.

The updated 2.6.32.y-drm33.z tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/smb/linux-2.6.32.y-drm33.z.git
or
git://kernel.ubuntu.com/smb/linux-2.6.32.y-drm33.z.git

and can be browsed through git web via:
http://git.kernel.org/?p=linux/kernel/git/smb/linux-2.6.32.y-drm33.z.git;a=summary
or
http://kernel.ubuntu.com/git?p=smb/linux-2.6.32.y-drm33.z.git;a=summary

-Stefan

------

* eCryptfs: Sanitize write counts of /dev/ecryptfs
* ecryptfs: Improve metadata read failure logging
* eCryptfs: Make truncate path killable
* crypto: sha512 - make it work, undo percpu message schedule
* crypto: sha512 - reduce stack usage to safe number
* Revert "ARM: 7220/1: mmc: mmci: Fixup error handling for dma"
* block: fail SCSI passthrough ioctls on partition devices
* dm: do not forward ioctls from logical volumes to the underlying device
* USB: ftdi_sio: fix TIOCSSERIAL baud_base handling
* USB: ftdi_sio: add PID for TI XDS100v2 / BeagleBone A3
* USB: serial: ftdi additional IDs
* USB: ftdi_sio: Add more identifiers
* USB: cdc-wdm: updating desc->length must be protected by spin_lock
* usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.
* USB: usbsevseg: fix max length
* hwmon: (f71805f) Fix clamping of temperature limits
* hwmon: (sht15) fix bad error code
* USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19
* USB: cp210x: do not map baud rates to B0
* USB: ftdi_sio: fix initial baud rate
* Linux 2.6.32.56

Makefile | 2 +-
block/scsi_ioctl.c | 45 ++++++++++++++++++++++++++
crypto/sha512_generic.c | 62 ++++++++++++++++++++----------------
drivers/hwmon/f71805f.c | 10 +++---
drivers/hwmon/sht15.c | 3 +-
drivers/md/dm-linear.c | 12 ++++++-
drivers/md/dm-mpath.c | 6 +++
drivers/mmc/host/mmci.c | 6 +---
drivers/scsi/sd.c | 11 +++++-
drivers/usb/class/cdc-wdm.c | 2 +
drivers/usb/misc/usbsevseg.c | 2 +-
drivers/usb/serial/cp210x.c | 5 ++-
drivers/usb/serial/ftdi_sio.c | 14 ++++++--
drivers/usb/serial/ftdi_sio_ids.h | 19 +++++++++++
drivers/usb/serial/io_ti.c | 10 +-----
fs/ecryptfs/crypto.c | 9 +++--
fs/ecryptfs/miscdev.c | 56 ++++++++++++++++++++++-----------
fs/ecryptfs/read_write.c | 19 ++++++++---
include/linux/blkdev.h | 1 +
19 files changed, 210 insertions(+), 84 deletions(-)

diff --git a/Makefile b/Makefile
index fc893e8..d6115c0 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 32
-EXTRAVERSION = .55+drm33.21
+EXTRAVERSION = .56+drm33.21
NAME = Man-Eating Seals of Antiquity

# *DOCUMENTATION*
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 114ee29..2be0a97 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -24,6 +24,7 @@
#include <linux/capability.h>
#include <linux/completion.h>
#include <linux/cdrom.h>
+#include <linux/ratelimit.h>
#include <linux/slab.h>
#include <linux/times.h>
#include <asm/uaccess.h>
@@ -689,9 +690,53 @@ int scsi_cmd_ioctl(struct request_queue *q, struct gendisk *bd_disk, fmode_t mod
}
EXPORT_SYMBOL(scsi_cmd_ioctl);

+int scsi_verify_blk_ioctl(struct block_device *bd, unsigned int cmd)
+{
+ if (bd && bd == bd->bd_contains)
+ return 0;
+
+ /* Actually none of these is particularly useful on a partition,
+ * but they are safe.
+ */
+ switch (cmd) {
+ case SCSI_IOCTL_GET_IDLUN:
+ case SCSI_IOCTL_GET_BUS_NUMBER:
+ case SCSI_IOCTL_GET_PCI:
+ case SCSI_IOCTL_PROBE_HOST:
+ case SG_GET_VERSION_NUM:
+ case SG_SET_TIMEOUT:
+ case SG_GET_TIMEOUT:
+ case SG_GET_RESERVED_SIZE:
+ case SG_SET_RESERVED_SIZE:
+ case SG_EMULATED_HOST:
+ return 0;
+ case CDROM_GET_CAPABILITY:
+ /* Keep this until we remove the printk below. udev sends it
+ * and we do not want to spam dmesg about it. CD-ROMs do
+ * not have partitions, so we get here only for disks.
+ */
+ return -ENOTTY;
+ default:
+ break;
+ }
+
+ /* In particular, rule out all resets and host-specific ioctls. */
+ printk_ratelimited(KERN_WARNING
+ "%s: sending ioctl %x to a partition!\n", current->comm, cmd);
+
+ return capable(CAP_SYS_RAWIO) ? 0 : -ENOTTY;
+}
+EXPORT_SYMBOL(scsi_verify_blk_ioctl);
+
int scsi_cmd_blk_ioctl(struct block_device *bd, fmode_t mode,
unsigned int cmd, void __user *arg)
{
+ int ret;
+
+ ret = scsi_verify_blk_ioctl(bd, cmd);
+ if (ret < 0)
+ return ret;
+
return scsi_cmd_ioctl(bd->bd_disk->queue, bd->bd_disk, mode, cmd, arg);
}
EXPORT_SYMBOL(scsi_cmd_blk_ioctl);
diff --git a/crypto/sha512_generic.c b/crypto/sha512_generic.c
index 9ed9f60..88f160b 100644
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -21,8 +21,6 @@
#include <linux/percpu.h>
#include <asm/byteorder.h>

-static DEFINE_PER_CPU(u64[80], msg_schedule);
-
static inline u64 Ch(u64 x, u64 y, u64 z)
{
return z ^ (x & (y ^ z));
@@ -80,7 +78,7 @@ static inline void LOAD_OP(int I, u64 *W, const u8 *input)

static inline void BLEND_OP(int I, u64 *W)
{
- W[I] = s1(W[I-2]) + W[I-7] + s0(W[I-15]) + W[I-16];
+ W[I % 16] += s1(W[(I-2) % 16]) + W[(I-7) % 16] + s0(W[(I-15) % 16]);
}

static void
@@ -89,38 +87,48 @@ sha512_transform(u64 *state, const u8 *input)
u64 a, b, c, d, e, f, g, h, t1, t2;

int i;
- u64 *W = get_cpu_var(msg_schedule);
+ u64 W[16];

/* load the input */
for (i = 0; i < 16; i++)
LOAD_OP(i, W, input);

- for (i = 16; i < 80; i++) {
- BLEND_OP(i, W);
- }
-
/* load the state into our registers */
a=state[0]; b=state[1]; c=state[2]; d=state[3];
e=state[4]; f=state[5]; g=state[6]; h=state[7];

- /* now iterate */
- for (i=0; i<80; i+=8) {
- t1 = h + e1(e) + Ch(e,f,g) + sha512_K[i ] + W[i ];
- t2 = e0(a) + Maj(a,b,c); d+=t1; h=t1+t2;
- t1 = g + e1(d) + Ch(d,e,f) + sha512_K[i+1] + W[i+1];
- t2 = e0(h) + Maj(h,a,b); c+=t1; g=t1+t2;
- t1 = f + e1(c) + Ch(c,d,e) + sha512_K[i+2] + W[i+2];
- t2 = e0(g) + Maj(g,h,a); b+=t1; f=t1+t2;
- t1 = e + e1(b) + Ch(b,c,d) + sha512_K[i+3] + W[i+3];
- t2 = e0(f) + Maj(f,g,h); a+=t1; e=t1+t2;
- t1 = d + e1(a) + Ch(a,b,c) + sha512_K[i+4] + W[i+4];
- t2 = e0(e) + Maj(e,f,g); h+=t1; d=t1+t2;
- t1 = c + e1(h) + Ch(h,a,b) + sha512_K[i+5] + W[i+5];
- t2 = e0(d) + Maj(d,e,f); g+=t1; c=t1+t2;
- t1 = b + e1(g) + Ch(g,h,a) + sha512_K[i+6] + W[i+6];
- t2 = e0(c) + Maj(c,d,e); f+=t1; b=t1+t2;
- t1 = a + e1(f) + Ch(f,g,h) + sha512_K[i+7] + W[i+7];
- t2 = e0(b) + Maj(b,c,d); e+=t1; a=t1+t2;
+#define SHA512_0_15(i, a, b, c, d, e, f, g, h) \
+ t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[i]; \
+ t2 = e0(a) + Maj(a, b, c); \
+ d += t1; \
+ h = t1 + t2
+
+#define SHA512_16_79(i, a, b, c, d, e, f, g, h) \
+ BLEND_OP(i, W); \
+ t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)%16]; \
+ t2 = e0(a) + Maj(a, b, c); \
+ d += t1; \
+ h = t1 + t2
+
+ for (i = 0; i < 16; i += 8) {
+ SHA512_0_15(i, a, b, c, d, e, f, g, h);
+ SHA512_0_15(i + 1, h, a, b, c, d, e, f, g);
+ SHA512_0_15(i + 2, g, h, a, b, c, d, e, f);
+ SHA512_0_15(i + 3, f, g, h, a, b, c, d, e);
+ SHA512_0_15(i + 4, e, f, g, h, a, b, c, d);
+ SHA512_0_15(i + 5, d, e, f, g, h, a, b, c);
+ SHA512_0_15(i + 6, c, d, e, f, g, h, a, b);
+ SHA512_0_15(i + 7, b, c, d, e, f, g, h, a);
+ }
+ for (i = 16; i < 80; i += 8) {
+ SHA512_16_79(i, a, b, c, d, e, f, g, h);
+ SHA512_16_79(i + 1, h, a, b, c, d, e, f, g);
+ SHA512_16_79(i + 2, g, h, a, b, c, d, e, f);
+ SHA512_16_79(i + 3, f, g, h, a, b, c, d, e);
+ SHA512_16_79(i + 4, e, f, g, h, a, b, c, d);
+ SHA512_16_79(i + 5, d, e, f, g, h, a, b, c);
+ SHA512_16_79(i + 6, c, d, e, f, g, h, a, b);
+ SHA512_16_79(i + 7, b, c, d, e, f, g, h, a);
}

state[0] += a; state[1] += b; state[2] += c; state[3] += d;
@@ -128,8 +136,6 @@ sha512_transform(u64 *state, const u8 *input)

/* erase our data */
a = b = c = d = e = f = g = h = t1 = t2 = 0;
- memset(W, 0, sizeof(__get_cpu_var(msg_schedule)));
- put_cpu_var(msg_schedule);
}

static int
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index 525a00b..15645ab 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -281,11 +281,11 @@ static inline long temp_from_reg(u8 reg)

static inline u8 temp_to_reg(long val)
{
- if (val < 0)
- val = 0;
- else if (val > 1000 * 0xff)
- val = 0xff;
- return ((val + 500) / 1000);
+ if (val <= 0)
+ return 0;
+ if (val >= 1000 * 0xff)
+ return 0xff;
+ return (val + 500) / 1000;
}

/*
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 2040507..740785e 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -515,7 +515,7 @@ static int sht15_invalidate_voltage(struct notifier_block *nb,

static int __devinit sht15_probe(struct platform_device *pdev)
{
- int ret = 0;
+ int ret;
struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);

if (!data) {
@@ -532,6 +532,7 @@ static int __devinit sht15_probe(struct platform_device *pdev)
init_waitqueue_head(&data->wait_queue);

if (pdev->dev.platform_data == NULL) {
+ ret = -EINVAL;
dev_err(&pdev->dev, "no platform data supplied");
goto err_free_data;
}
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 82f7d6e..7ab302d 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -116,7 +116,17 @@ static int linear_ioctl(struct dm_target *ti, unsigned int cmd,
unsigned long arg)
{
struct linear_c *lc = (struct linear_c *) ti->private;
- return __blkdev_driver_ioctl(lc->dev->bdev, lc->dev->mode, cmd, arg);
+ struct dm_dev *dev = lc->dev;
+ int r = 0;
+
+ /*
+ * Only pass ioctls through if the device sizes match exactly.
+ */
+ if (lc->start ||
+ ti->len != i_size_read(dev->bdev->bd_inode) >> SECTOR_SHIFT)
+ r = scsi_verify_blk_ioctl(NULL, cmd);
+
+ return r ? : __blkdev_driver_ioctl(dev->bdev, dev->mode, cmd, arg);
}

static int linear_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index b03cd39..4ec5fe2 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1464,6 +1464,12 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,

spin_unlock_irqrestore(&m->lock, flags);

+ /*
+ * Only pass ioctls through if the device sizes match exactly.
+ */
+ if (!r && ti->len != i_size_read(bdev->bd_inode) >> SECTOR_SHIFT)
+ r = scsi_verify_blk_ioctl(NULL, cmd);
+
return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg);
}

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 68d800f..705a589 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -232,12 +232,8 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
}

if (!cmd->data || cmd->error) {
- if (host->data) {
- /* Terminate the DMA transfer */
- if (dma_inprogress(host))
- mmci_dma_data_error(host);
+ if (host->data)
mmci_stop_data(host);
- }
mmci_request_end(host, cmd->mrq);
} else if (!(cmd->data->flags & MMC_DATA_READ)) {
mmci_start_data(host, cmd->data);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2dd1b73..a5b55fe 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -817,6 +817,10 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode,
SCSI_LOG_IOCTL(1, printk("sd_ioctl: disk=%s, cmd=0x%x\n",
disk->disk_name, cmd));

+ error = scsi_verify_blk_ioctl(bdev, cmd);
+ if (error < 0)
+ return error;
+
/*
* If we are in the middle of error recovery, don't let anyone
* else try and use this device. Also, if error recovery fails, it
@@ -996,6 +1000,11 @@ static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
+ int ret;
+
+ ret = scsi_verify_blk_ioctl(bdev, cmd);
+ if (ret < 0)
+ return -ENOIOCTLCMD;

/*
* If we are in the middle of error recovery, don't let anyone
@@ -1007,8 +1016,6 @@ static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
return -ENODEV;

if (sdev->host->hostt->compat_ioctl) {
- int ret;
-
ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);

return ret;
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 696ca75f..d71514b 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -458,7 +458,9 @@ retry:
for (i = 0; i < desc->length - cntr; i++)
desc->ubuf[i] = desc->ubuf[i + cntr];

+ spin_lock_irq(&desc->iuspin);
desc->length -= cntr;
+ spin_unlock_irq(&desc->iuspin);
/* in case we had outstanding data */
if (!desc->length)
clear_bit(WDM_READ, &desc->flags);
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index cd8726c..6bc0bf3 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -24,7 +24,7 @@

#define VENDOR_ID 0x0fc5
#define PRODUCT_ID 0x1227
-#define MAXLEN 6
+#define MAXLEN 8

/* table of devices that work with this driver */
static struct usb_device_id id_table[] = {
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8dcaf42..bb16725 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -140,6 +140,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
@@ -360,8 +361,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port,
* Quantises the baud rate as per AN205 Table 1
*/
static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
- if (baud <= 56) baud = 0;
- else if (baud <= 300) baud = 300;
+ if (baud <= 300)
+ baud = 300;
else if (baud <= 600) baud = 600;
else if (baud <= 1200) baud = 1200;
else if (baud <= 1800) baud = 1800;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5ce2cb9..85d630e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -798,6 +798,7 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
@@ -806,6 +807,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -842,6 +845,7 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1351,8 +1355,7 @@ static int set_serial_info(struct tty_struct *tty,
goto check_and_exit;
}

- if ((new_serial.baud_base != priv->baud_base) &&
- (new_serial.baud_base < 9600)) {
+ if (new_serial.baud_base != priv->baud_base) {
unlock_kernel();
return -EINVAL;
}
@@ -1865,6 +1868,7 @@ static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)

static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{ /* ftdi_open */
+ struct ktermios dummy;
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
@@ -1892,8 +1896,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
This is same behaviour as serial.c/rs_open() - Kuba */

/* ftdi_set_termios will send usb control messages */
- if (tty)
- ftdi_set_termios(tty, port, tty->termios);
+ if (tty) {
+ memset(&dummy, 0, sizeof(dummy));
+ ftdi_set_termios(tty, port, &dummy);
+ }

/* Not throttled */
spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 8ce1bcb..212fc41 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -38,6 +38,13 @@
/* www.candapter.com Ewert Energy Systems CANdapter device */
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */

+/*
+ * Texas Instruments XDS100v2 JTAG / BeagleBone A3
+ * http://processors.wiki.ti.com/index.php/XDS100
+ * http://beagleboard.org/bone
+ */
+#define TI_XDS100V2_PID 0xa6d0
+
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */

/* US Interface Navigator (http://www.usinterface.com/) */
@@ -524,6 +531,12 @@
#define ADI_GNICEPLUS_PID 0xF001

/*
+ * Hornby Elite
+ */
+#define HORNBY_VID 0x04D8
+#define HORNBY_ELITE_PID 0x000A
+
+/*
* RATOC REX-USB60F
*/
#define RATOC_VENDOR_ID 0x0584
@@ -1173,3 +1186,9 @@
*/
/* TagTracer MIFARE*/
#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0
+
+/*
+ * Rainforest Automation
+ */
+/* ZigBee controller */
+#define FTDI_RF_R106 0x8A28
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index fbdbac5..14d51e6 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2664,15 +2664,7 @@ cleanup:

static void edge_disconnect(struct usb_serial *serial)
{
- int i;
- struct edgeport_port *edge_port;
-
dbg("%s", __func__);
-
- for (i = 0; i < serial->num_ports; ++i) {
- edge_port = usb_get_serial_port_data(serial->port[i]);
- edge_remove_sysfs_attrs(edge_port->port);
- }
}

static void edge_release(struct usb_serial *serial)
@@ -2927,6 +2919,7 @@ static struct usb_serial_driver edgeport_1port_device = {
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
+ .port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
@@ -2957,6 +2950,7 @@ static struct usb_serial_driver edgeport_2port_device = {
.disconnect = edge_disconnect,
.release = edge_release,
.port_probe = edge_create_sysfs_attrs,
+ .port_remove = edge_remove_sysfs_attrs,
.ioctl = edge_ioctl,
.set_termios = edge_set_termios,
.tiocmget = edge_tiocmget,
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index 443947f..7a5f1ac 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -1609,7 +1609,8 @@ int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry)
rc = ecryptfs_read_xattr_region(page_virt, ecryptfs_inode);
if (rc) {
printk(KERN_DEBUG "Valid eCryptfs headers not found in "
- "file header region or xattr region\n");
+ "file header region or xattr region, inode %lu\n",
+ ecryptfs_inode->i_ino);
rc = -EINVAL;
goto out;
}
@@ -1618,7 +1619,8 @@ int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry)
ECRYPTFS_DONT_VALIDATE_HEADER_SIZE);
if (rc) {
printk(KERN_DEBUG "Valid eCryptfs headers not found in "
- "file xattr region either\n");
+ "file xattr region either, inode %lu\n",
+ ecryptfs_inode->i_ino);
rc = -EINVAL;
}
if (crypt_stat->mount_crypt_stat->flags
@@ -1629,7 +1631,8 @@ int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry)
"crypto metadata only in the extended attribute "
"region, but eCryptfs was mounted without "
"xattr support enabled. eCryptfs will not treat "
- "this like an encrypted file.\n");
+ "this like an encrypted file, inode %lu\n",
+ ecryptfs_inode->i_ino);
rc = -EINVAL;
}
}
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 4ec8f61..c4b0bc5 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -408,11 +408,47 @@ ecryptfs_miscdev_write(struct file *file, const char __user *buf,
ssize_t sz = 0;
char *data;
uid_t euid = current_euid();
+ unsigned char packet_size_peek[3];
int rc;

- if (count == 0)
+ if (count == 0) {
goto out;
+ } else if (count == (1 + 4)) {
+ /* Likely a harmless MSG_HELO or MSG_QUIT - no packet length */
+ goto memdup;
+ } else if (count < (1 + 4 + 1)
+ || count > (1 + 4 + 2 + sizeof(struct ecryptfs_message) + 4
+ + ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES)) {
+ printk(KERN_WARNING "%s: Acceptable packet size range is "
+ "[%d-%lu], but amount of data written is [%zu].",
+ __func__, (1 + 4 + 1),
+ (1 + 4 + 2 + sizeof(struct ecryptfs_message) + 4
+ + ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES), count);
+ return -EINVAL;
+ }
+
+ if (copy_from_user(packet_size_peek, (buf + 1 + 4),
+ sizeof(packet_size_peek))) {
+ printk(KERN_WARNING "%s: Error while inspecting packet size\n",
+ __func__);
+ return -EFAULT;
+ }
+
+ rc = ecryptfs_parse_packet_length(packet_size_peek, &packet_size,
+ &packet_size_length);
+ if (rc) {
+ printk(KERN_WARNING "%s: Error parsing packet length; "
+ "rc = [%d]\n", __func__, rc);
+ return rc;
+ }
+
+ if ((1 + 4 + packet_size_length + packet_size) != count) {
+ printk(KERN_WARNING "%s: Invalid packet size [%zu]\n", __func__,
+ packet_size);
+ return -EINVAL;
+ }

+memdup:
data = memdup_user(buf, count);
if (IS_ERR(data)) {
printk(KERN_ERR "%s: memdup_user returned error [%ld]\n",
@@ -434,23 +470,7 @@ ecryptfs_miscdev_write(struct file *file, const char __user *buf,
}
memcpy(&counter_nbo, &data[i], 4);
seq = be32_to_cpu(counter_nbo);
- i += 4;
- rc = ecryptfs_parse_packet_length(&data[i], &packet_size,
- &packet_size_length);
- if (rc) {
- printk(KERN_WARNING "%s: Error parsing packet length; "
- "rc = [%d]\n", __func__, rc);
- goto out_free;
- }
- i += packet_size_length;
- if ((1 + 4 + packet_size_length + packet_size) != count) {
- printk(KERN_WARNING "%s: (1 + packet_size_length([%zd])"
- " + packet_size([%zd]))([%zd]) != "
- "count([%zd]). Invalid packet format.\n",
- __func__, packet_size_length, packet_size,
- (1 + packet_size_length + packet_size), count);
- goto out_free;
- }
+ i += 4 + packet_size_length;
rc = ecryptfs_miscdev_response(&data[i], packet_size,
euid, current_user_ns(),
task_pid(current), seq);
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index 0cc4faf..6b78546 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -136,6 +136,11 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset,
size_t num_bytes = (PAGE_CACHE_SIZE - start_offset_in_page);
size_t total_remaining_bytes = ((offset + size) - pos);

+ if (fatal_signal_pending(current)) {
+ rc = -EINTR;
+ break;
+ }
+
if (num_bytes > total_remaining_bytes)
num_bytes = total_remaining_bytes;
if (pos < offset) {
@@ -197,15 +202,19 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset,
}
pos += num_bytes;
}
- if ((offset + size) > ecryptfs_file_size) {
- i_size_write(ecryptfs_inode, (offset + size));
+ if (pos > ecryptfs_file_size) {
+ i_size_write(ecryptfs_inode, pos);
if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) {
- rc = ecryptfs_write_inode_size_to_metadata(
+ int rc2;
+
+ rc2 = ecryptfs_write_inode_size_to_metadata(
ecryptfs_inode);
- if (rc) {
+ if (rc2) {
printk(KERN_ERR "Problem with "
"ecryptfs_write_inode_size_to_metadata; "
- "rc = [%d]\n", rc);
+ "rc = [%d]\n", rc2);
+ if (!rc)
+ rc = rc2;
goto out;
}
}
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 63070ad..5eb6cb0 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -777,6 +777,7 @@ extern void blk_plug_device(struct request_queue *);
extern void blk_plug_device_unlocked(struct request_queue *);
extern int blk_remove_plug(struct request_queue *);
extern void blk_recount_segments(struct request_queue *, struct bio *);
+extern int scsi_verify_blk_ioctl(struct block_device *, unsigned int);
extern int scsi_cmd_blk_ioctl(struct block_device *, fmode_t,
unsigned int, void __user *);
extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t,

\
 
 \ /
  Last update: 2012-02-03 19:31    [W:0.033 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site