lkml.org 
[lkml]   [2012]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] pcie: Add support for setting default ASPM policy
Date
Distributions may wish to provide different defaults for PCIE ASPM
depending on their target audience. Provide a configuration option for
choosing the default policy.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: linux-pci@vger.kernel.org
Cc: jbarnes@virtuousgeek.org
---
drivers/pci/pcie/Kconfig | 25 +++++++++++++++++++++++++
drivers/pci/pcie/aspm.c | 8 ++++++++
2 files changed, 33 insertions(+), 0 deletions(-)

diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 72962cc..6c8bc58 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -55,6 +55,31 @@ config PCIEASPM_DEBUG
This enables PCI Express ASPM debug support. It will add per-device
interface to control ASPM.

+choice
+ prompt "Default ASPM policy"
+ default PCIEASPM_DEFAULT
+ depends on PCIEASPM
+
+config PCIEASPM_DEFAULT
+ bool "BIOS default"
+ depends on PCIEASPM
+ help
+ Use the BIOS defaults for PCI Express ASPM.
+
+config PCIEASPM_POWERSAVE
+ bool "Powersave"
+ depends on PCIEASPM
+ help
+ Enable PCI Express ASPM L0s and L1 where possible, even if the
+ BIOS did not.
+
+config PCIEASPM_PERFORMANCE
+ bool "Performance"
+ depends on PCIEASPM
+ help
+ Disable PCI Express ASPM L0s and L1, even if the BIOS enabled them.
+endchoice
+
config PCIE_PME
def_bool y
depends on PCIEPORTBUS && PM_RUNTIME && EXPERIMENTAL && ACPI
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 1cfbf22..a0de5e1 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -76,7 +76,15 @@ static LIST_HEAD(link_list);
#define POLICY_DEFAULT 0 /* BIOS default setting */
#define POLICY_PERFORMANCE 1 /* high performance */
#define POLICY_POWERSAVE 2 /* high power saving */
+
+#ifdef CONFIG_PCIEASPM_PERFORMANCE
+static int aspm_policy = POLICY_PERFORMANCE;
+#elif defined CONFIG_PCIEASPM_POWERSAVE
+static int aspm_policy = POLICY_POWERSAVE;
+#else
static int aspm_policy;
+#endif
+
static const char *policy_str[] = {
[POLICY_DEFAULT] = "default",
[POLICY_PERFORMANCE] = "performance",
--
1.7.7.6


\
 
 \ /
  Last update: 2012-02-03 16:21    [W:1.796 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site