lkml.org 
[lkml]   [2012]   [Feb]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 0/4 V2] pch_uart: Cleanups, board quirks, and user uartclk parameter
From
Hi

Darren's patch series, I think OK.
However, need to proceed next step.

As I said before,
internal clock(USB_48MHz) should be used than external clock(UART_CLK)
as default setting.
--Reasons
- Users don't always use 1.8432MHz as UART_CLK.
So, In case of using except 1.8432MHz,
the user needs to change both pch_phub and pch_uart setting (It's
bother things).
- High baud rate can't be used more than 115Kbps

I think there is no merit to use UART_CLK.

---Merit to use 192MHz
- Users don't have to care both pch_phub and pch_uart clock setting.
- High baud rate can be supported
thanks,

ROHM Co., Ltd.
tomoya


\
 
 \ /
  Last update: 2012-03-01 01:41    [from the cache]
©2003-2011 Jasper Spaans