lkml.org 
[lkml]   [2012]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] Input: usbtouchscreen: add support for Data Modul EasyTouch TP 72037
Date
From: Armando Visconti <armando.visconti@st.com>

The Data Modul TP 72037 EasyTouch controller is derived from EGALAX
controller and is capable of detecting dual contacts. Packets can be 5
bytes or 10 bytes long, depending whether one or two contacts are
detected. Format is same as EGALAX touch controller, but with x and y
coordinates inverted.

Signed-off-by: Armando Visconti <armando.visconti@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
drivers/input/touchscreen/Kconfig | 9 ++++
drivers/input/touchscreen/usbtouchscreen.c | 59 ++++++++++++++++++++++++++++
2 files changed, 68 insertions(+), 0 deletions(-)

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 2b21a70..2acf16f 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -607,6 +607,7 @@ config TOUCHSCREEN_USB_COMPOSITE
- JASTEC USB Touch Controller/DigiTech DTR-02U
- Zytronic controllers
- Elo TouchSystems 2700 IntelliTouch
+ - EasyTouch USB Touch Controller from Data Modul

Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
@@ -711,6 +712,14 @@ config TOUCHSCREEN_USB_NEXIO
bool "NEXIO/iNexio device support" if EXPERT
depends on TOUCHSCREEN_USB_COMPOSITE

+config TOUCHSCREEN_USB_EASYTOUCH
+ default y
+ bool "EasyTouch USB Touch controller device support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+ help
+ Say Y here if you have a EasyTouch USB Touch controller device support.
+ If unsure, say N.
+
config TOUCHSCREEN_TOUCHIT213
tristate "Sahara TouchIT-213 touchscreen"
select SERIO
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 3a5ebf4..39350cc 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -17,6 +17,7 @@
* - Zytronic capacitive touchscreen
* - NEXIO/iNexio
* - Elo TouchSystems 2700 IntelliTouch
+ * - EasyTouch USB Dual/Multi touch controller from Data Modul
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -140,6 +141,7 @@ enum {
DEVTYPE_TC45USB,
DEVTYPE_NEXIO,
DEVTYPE_ELO,
+ DEVTYPE_ETOUCH,
};

#define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -245,6 +247,10 @@ static const struct usb_device_id usbtouch_devices[] = {
{USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO},
#endif

+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+ {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH},
+#endif
+
{}
};

@@ -326,6 +332,47 @@ static int egalax_get_pkt_len(unsigned char *buf, int len)
}
#endif

+/*****************************************************************************
+ * EasyTouch part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+
+#define EGALAX_PKT_TYPE_MASK 0xFE
+#define EGALAX_PKT_TYPE_REPT 0x80
+#define EGALAX_PKT_TYPE_REPT2 0xB0
+#define EGALAX_PKT_TYPE_DIAG 0x0A
+
+static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT &&
+ (pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT2)
+ return 0;
+
+ dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F);
+ dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F);
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+
+static int etouch_get_pkt_len(unsigned char *buf, int len)
+{
+ switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+ case EGALAX_PKT_TYPE_REPT:
+ case EGALAX_PKT_TYPE_REPT2:
+ return 5;
+
+ case EGALAX_PKT_TYPE_DIAG:
+ if (len < 2)
+ return -1;
+
+ return buf[1] + 2;
+ }
+
+ return 0;
+}
+#endif

/*****************************************************************************
* PanJit Part
@@ -1175,6 +1222,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
.exit = nexio_exit,
},
#endif
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+ [DEVTYPE_ETOUCH] = {
+ .min_xc = 0x0,
+ .max_xc = 0x07ff,
+ .min_yc = 0x0,
+ .max_yc = 0x07ff,
+ .rept_size = 16,
+ .process_pkt = usbtouch_process_multi,
+ .get_pkt_len = etouch_get_pkt_len,
+ .read_data = etouch_read_data,
+ },
+#endif
};


--
1.7.8.110.g4cb5d


\
 
 \ /
  Last update: 2012-02-24 07:15    [W:0.056 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site