[lkml]   [2012]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectSudden kernel panic with skge in 3.3-rc2

    I just saw this panic on 3.3-rc2 with skge. I don't know whether it's
    reproducible yet -- the machine crashed while I was not actively using
    it. We've had this type of card for a few years and I've never seen this
    before so it may be a regression, but admittedly we don't use them all
    that often.

    At the time of the crash, the network interface in question was up, but
    not configured with any addresses; mtu configured to (the default) 1500
    bytes. It was used for packet capture (tcpdump) shortly beforehand,
    although this was not running at the time of the crash. It's a PCI
    gigabit ethernet card:

    03:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)

    In case it matters, the primary network interface of the system is an
    onboard device using the sky2 driver:

    02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10)

    I took a photo of the screen, but unfortuately the top few lines are
    lost forever. Posted at imgur because it seems a bit big for the
    mailing lists: <>. Apologies for the
    terrible quality; the best camera I could find around was in someone's
    mobile phone. I'll see about configuring a serial console in case it
    crashes again.

    For convenience (hopefully), here's the call trace retyped in plain text
    (addresses elided, see photo for them). The full code line is
    reproduced by hand because it's almost unreadable in the photo (and
    truncated to boot).

    Call Trace:
    [...] net_rx_action+0xaa/0x1c0
    [...] __do_softirq+0x7e/0x125
    [...] ? _raw_spin_unlock+0x26/0x31
    [...] call_softirq+0x1c/0x30
    [...] do_softirq+0x33/0x68
    [...] irq_exit+0x3f/0xb9
    [...] do_IRQ+0x97/0xae
    [...] common_interrupt+0x6b/0x6b
    [...] ? hrtimer_start+0x13/0x15
    [...] ? mwait_idle+0x6e/0x80
    [...] ? mwait_idle+0x61/0x80
    [...] cpu_idle+0x61/0xbd
    [...] rest_init+0x8d/0x91
    [...] start_kernel+0x338/0x343
    [...] x86_64_start_reservations+0xb8/0xbd
    [...] x86_64_start_kernel+0xed/0xf4
    Code: 48 8b 40 30 48 85 c0 74 0a b9 02 00 00 00 4c 89 fa ff d0 49 8b 86 d0 00 00 00 49 8b 4d b4 48 89 c7 48 8b b2 d0 00 00 00 <f3> a4 31 ff 48 8b 03 49 8b 75 18 48 8b 40 08 48 85 c0 74 13 48
    RIP [...] skge_poll+0x367/0x5cd [skge]

    Let me know if you need any more info,
    Nick Bowler, Elliptic Technologies (

     \ /
      Last update: 2012-02-02 20:23    [W:0.025 / U:4.264 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site