lkml.org 
[lkml]   [2012]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: OMAP2+: gpmc-smsc911x: add required smsc911x regulators
On Mon, Feb 13, 2012 at 11:43:42AM -0500, Matt Porter wrote:
> This fixes smsc911x support on platforms using gpmc_smsc911x_init().
> Commit c7e963f6888816f04d1f5da0e07bec4e0092f227 added the requirement
> that platforms provide vdd33a and vddvario supplies.

Thanks. Only one comment on this.

> +static struct platform_device gpmc_smsc911x_regulator = {
> + .name = "reg-fixed-voltage",
> + .id = 0,

$ grep -A1 reg-fixed-voltage arch/arm/*omap* -r
arch/arm/mach-omap2/board-omap3evm.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-omap3evm.c- .id = 1,
--
arch/arm/mach-omap2/board-zoom-peripherals.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-zoom-peripherals.c- .id = 1,
--
arch/arm/mach-omap2/board-overo.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-overo.c- .id = 1,
--
arch/arm/mach-omap2/board-omap4panda.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-omap4panda.c- .id = 1,
--
arch/arm/mach-omap2/board-rm680.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-rm680.c- .dev = {
--
arch/arm/mach-omap2/board-igep0020.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-igep0020.c- .id = 0,
--
arch/arm/mach-omap2/board-4430sdp.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-4430sdp.c- .id = -1,
--
arch/arm/mach-omap2/board-4430sdp.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-4430sdp.c- .id = 1,
--
arch/arm/mach-omap2/board-omap3pandora.c: .name = "reg-fixed-voltage",
arch/arm/mach-omap2/board-omap3pandora.c- .id = 1,
igep0020.c does this:

static struct omap_smsc911x_platform_data smsc911x_cfg = {
.cs = IGEP2_SMSC911X_CS,
.gpio_irq = IGEP2_SMSC911X_GPIO,
.gpio_reset = -EINVAL,
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
};
static inline void __init igep2_init_smsc911x(void)
{
gpmc_smsc911x_init(&smsc911x_cfg);
}
so it seems to use the gpmc_smsc stuff as well. So we're ending up with
two "reg-fixed-voltage" devices both with ID 0. That's not going to work,
and the driver model/sysfs will give you a nice warning there about that.

I think OMAP (or even the reg-fixed-voltage folk) needs to create an enum
similar to what I did for 8250 to control the allocation of platform
device IDs for this, otherwise we're going to keep on running over this
problem.

/*
* Allocate 8250 platform device IDs. Nothing is implied by
* the numbering here, except for the legacy entry being -1.
*/
enum {
PLAT8250_DEV_LEGACY = -1,
PLAT8250_DEV_PLATFORM,
PLAT8250_DEV_PLATFORM1,
PLAT8250_DEV_PLATFORM2,
PLAT8250_DEV_FOURPORT,
PLAT8250_DEV_ACCENT,
PLAT8250_DEV_BOCA,
PLAT8250_DEV_EXAR_ST16C554,
PLAT8250_DEV_HUB6,
PLAT8250_DEV_MCA,
PLAT8250_DEV_AU1X00,
PLAT8250_DEV_SM501,
};
Added Mark for his comment.


\
 
 \ /
  Last update: 2012-02-13 17:55    [W:0.090 / U:1.040 seconds]
©2003-2014 Jasper Spaans. Advertise on this site