lkml.org 
[lkml]   [2012]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/9] ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio
Date
irq_to_gpio() macro will be removed from AT91 GPIO interrupt
controller. So we replace it with the use of gpio_to_irq()
and a reworked test.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: linux-usb@vger.kernel.org
---
drivers/usb/host/ohci-at91.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 77afabc..8e855eb 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -448,10 +448,11 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)

/* From the GPIO notifying the over-current situation, find
* out the corresponding port */
- gpio = irq_to_gpio(irq);
for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
- if (pdata->overcurrent_pin[port] == gpio)
+ if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
+ gpio = pdata->overcurrent_pin[port];
break;
+ }
}

if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
--
1.7.9


\
 
 \ /
  Last update: 2012-02-13 15:47    [W:0.147 / U:0.184 seconds]
©2003-2014 Jasper Spaans. Advertise on this site