lkml.org 
[lkml]   [2012]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] device_isolation: Support isolation on POWER p7ioc (IODA) bridges
On Wed, Feb 01, 2012 at 12:17:05PM -0700, Alex Williamson wrote:
> On Wed, 2012-02-01 at 15:46 +1100, David Gibson wrote:
> > This patch adds code to the code for the powernv platform to create
> > and populate isolation groups on hardware using the p7ioc (aka IODA) PCI host
> > bridge used on some IBM POWER systems.
> >
> > Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> > Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> > ---
> > arch/powerpc/platforms/powernv/pci-ioda.c | 18 ++++++++++++++++--
> > arch/powerpc/platforms/powernv/pci.h | 6 ++++++
> > 2 files changed, 22 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> > index 5e155df..4648475 100644
> > --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> > +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> > @@ -20,6 +20,7 @@
> > #include <linux/irq.h>
> > #include <linux/io.h>
> > #include <linux/msi.h>
> > +#include <linux/device_isolation.h>
> >
> > #include <asm/sections.h>
> > #include <asm/io.h>
> > @@ -877,6 +878,9 @@ static void __devinit pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe,
> > set_iommu_table_base(&dev->dev, &pe->tce32_table);
> > if (dev->subordinate)
> > pnv_ioda_setup_bus_dma(pe, dev->subordinate);
> > +#ifdef CONFIG_DEVICE_ISOLATION
> > + device_isolation_dev_add(&pe->di_group, &dev->dev);
> > +#endif
> > }
> > }
> >
> > @@ -957,11 +961,21 @@ static void __devinit pnv_pci_ioda_setup_dma_pe(struct pnv_phb *phb,
> > }
> > iommu_init_table(tbl, phb->hose->node);
> >
> > - if (pe->pdev)
> > +#ifdef CONFIG_DEVICE_ISOLATION
> > + BUG_ON(device_isolation_group_init(&pe->di_group, "ioda:rid%x-pe%x",
> > + pe->rid, pe->pe_number) < 0);
> > +#endif
> > +
> > + if (pe->pdev) {
> > set_iommu_table_base(&pe->pdev->dev, tbl);
> > - else
> > +#ifdef CONFIG_DEVICE_ISOLATION
> > + device_isolation_dev_add(&pe->di_group, &pe->pdev->dev);
> > +#endif
> > + } else
> > pnv_ioda_setup_bus_dma(pe, pe->pbus);
>
> Blech, #ifdefs.

Hm, yeah. The problem is the di_group member not even existing when
!DEVICE_ISOLATION. Might be able to avoid that with an empty
structure in that case.

> > +
> > +
> > return;
> > fail:
> > /* XXX Failure: Try to fallback to 64-bit only ? */
> > diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> > index 64ede1e..3e282b7 100644
> > --- a/arch/powerpc/platforms/powernv/pci.h
> > +++ b/arch/powerpc/platforms/powernv/pci.h
> > @@ -1,6 +1,8 @@
> > #ifndef __POWERNV_PCI_H
> > #define __POWERNV_PCI_H
> >
> > +#include <linux/device_isolation.h>
> > +
> > struct pci_dn;
> >
> > enum pnv_phb_type {
> > @@ -60,6 +62,10 @@ struct pnv_ioda_pe {
> >
> > /* Link in list of PE#s */
> > struct list_head link;
> > +
> > +#ifdef CONFIG_DEVICE_ISOLATION
> > + struct device_isolation_group di_group;
> > +#endif
>
> Embedding the struct means we need to know the size, which means we
> can't get rid of the #ifdef. Probably better to use a pointer if we
> don't mind adding a few bytes in the #ifndef case. Thanks,

I've been back and forth a few types on this, and I've convinced
myself that allowing the group structure to be embedded is a better
idea. It's a particular help when you need to construct one from
platform or bridge init code that runs before mem_init_done.

--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson


\
 
 \ /
  Last update: 2012-02-02 03:09    [W:0.088 / U:1.292 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site