lkml.org 
[lkml]   [2012]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[41/89] USB: ftdi_sio: fix initial baud rate
3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <jhovold@gmail.com>

commit 108e02b12921078a59dcacd048079ece48a4a983 upstream.

Fix regression introduced by commit b1ffb4c851f1 ("USB: Fix Corruption
issue in USB ftdi driver ftdi_sio.c") which caused the termios settings
to no longer be initialised at open. Consequently it was no longer
possible to set the port to the default speed of 9600 baud without first
changing to another baud rate and back again.

Reported-by: Roland Ramthun <mail@roland-ramthun.de>
Signed-off-by: Johan Hovold <jhovold@gmail.com>
Tested-by: Roland Ramthun <mail@roland-ramthun.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/serial/ftdi_sio.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1823,6 +1823,7 @@ static int ftdi_sio_port_remove(struct u

static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{
+ struct ktermios dummy;
struct usb_device *dev = port->serial->dev;
struct ftdi_private *priv = usb_get_serial_port_data(port);
int result;
@@ -1841,8 +1842,10 @@ static int ftdi_open(struct tty_struct *
This is same behaviour as serial.c/rs_open() - Kuba */

/* ftdi_set_termios will send usb control messages */
- if (tty)
- ftdi_set_termios(tty, port, tty->termios);
+ if (tty) {
+ memset(&dummy, 0, sizeof(dummy));
+ ftdi_set_termios(tty, port, &dummy);
+ }

/* Start reading from the device */
result = usb_serial_generic_open(tty, port);



\
 
 \ /
  Last update: 2012-02-01 22:37    [W:0.223 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site