lkml.org 
[lkml]   [2012]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/44] metag: Headers for core arch constants
Date
Add a couple of header files containing core architecture constants.

The first (<asm/metag_isa.h>) contains some constants relating to the
instruction set, such as values to give to the CACHEW and CACHER
instructions.

The second (<asm/metag_regs.h>) contains constants for the core register
units directly accessible to various instructions, and for the
registers, fields, and bits in those units. The main units described are
the control unit (CT.*), the trigger unit (TR.*), and the run-time trace
unit (TT.*).

Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
arch/metag/include/asm/metag_isa.h | 81 +++
arch/metag/include/asm/metag_regs.h | 1180 +++++++++++++++++++++++++++++++++++
2 files changed, 1261 insertions(+), 0 deletions(-)
create mode 100644 arch/metag/include/asm/metag_isa.h
create mode 100644 arch/metag/include/asm/metag_regs.h

diff --git a/arch/metag/include/asm/metag_isa.h b/arch/metag/include/asm/metag_isa.h
new file mode 100644
index 0000000..c8aa2ae
--- /dev/null
+++ b/arch/metag/include/asm/metag_isa.h
@@ -0,0 +1,81 @@
+/*
+ * asm/metag_isa.h
+ *
+ * Copyright (C) 2000-2007, 2012 Imagination Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Various defines for Meta instruction set.
+ */
+
+#ifndef _ASM_METAG_ISA_H_
+#define _ASM_METAG_ISA_H_
+
+
+/* L1 cache layout */
+
+/* Data cache line size as bytes and shift */
+#define DCACHE_LINE_BYTES 64
+#define DCACHE_LINE_S 6
+
+/* Number of ways in the data cache */
+#define DCACHE_WAYS 4
+
+/* Instruction cache line size as bytes and shift */
+#define ICACHE_LINE_BYTES 64
+#define ICACHE_LINE_S 6
+
+/* Number of ways in the instruction cache */
+#define ICACHE_WAYS 4
+
+
+/*
+ * CACHEWD/CACHEWL instructions use the bottom 8 bits of the data presented to
+ * control the operation actually achieved.
+ */
+/* Use of these two bits should be discouraged since the bits dont have
+ * consistent meanings
+ */
+#define CACHEW_ICACHE_BIT 0x01
+#define CACHEW_TLBFLUSH_BIT 0x02
+
+#define CACHEW_FLUSH_L1D_L2 0x0
+#define CACHEW_INVALIDATE_L1I 0x1
+#define CACHEW_INVALIDATE_L1DTLB 0x2
+#define CACHEW_INVALIDATE_L1ITLB 0x3
+#define CACHEW_WRITEBACK_L1D_L2 0x4
+#define CACHEW_INVALIDATE_L1D 0x8
+#define CACHEW_INVALIDATE_L1D_L2 0xC
+
+/*
+ * CACHERD/CACHERL instructions use bits 3:5 of the address presented to
+ * control the operation achieved and hence the specific result.
+ */
+#define CACHER_ADDR_BITS 0xFFFFFFC0
+#define CACHER_OPER_BITS 0x00000030
+#define CACHER_OPER_S 4
+#define CACHER_OPER_LINPHY 0
+#define CACHER_ICACHE_BIT 0x00000008
+#define CACHER_ICACHE_S 3
+
+/*
+ * CACHERD/CACHERL LINPHY Oper result is one/two 32-bit words
+ *
+ * If CRLINPHY0_VAL_BIT (Bit 0) set then,
+ * Lower 32-bits corresponds to MMCU_ENTRY_* above.
+ * Upper 32-bits corresponds to CRLINPHY1_* values below (if requested).
+ * else
+ * Lower 32-bits corresponds to CRLINPHY0_* values below.
+ * Upper 32-bits undefined.
+ */
+#define CRLINPHY0_VAL_BIT 0x00000001
+#define CRLINPHY0_FIRST_BIT 0x00000004 /* Set if VAL=0 due to first level */
+
+#define CRLINPHY1_READ_BIT 0x00000001 /* Set if reads permitted */
+#define CRLINPHY1_SINGLE_BIT 0x00000004 /* Set if TLB does not cache entry */
+#define CRLINPHY1_PAGEMSK_BITS 0x0000FFF0 /* Set to ((2^n-1)>>12) value */
+#define CRLINPHY1_PAGEMSK_S 4
+
+#endif /* _ASM_METAG_ISA_H_ */
diff --git a/arch/metag/include/asm/metag_regs.h b/arch/metag/include/asm/metag_regs.h
new file mode 100644
index 0000000..022fcad
--- /dev/null
+++ b/arch/metag/include/asm/metag_regs.h
@@ -0,0 +1,1180 @@
+/*
+ * asm/metag_regs.h
+ *
+ * Copyright (C) 2000-2007, 2012 Imagination Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Various defines for Meta core (non memory-mapped) registers.
+ */
+
+#ifndef _ASM_METAG_REGS_H_
+#define _ASM_METAG_REGS_H_
+
+/*
+ * CHIP Unit Identifiers and Valid/Global register number masks
+ * ------------------------------------------------------------
+ */
+#define TXUCT_ID 0x0 /* Control unit regs */
+#ifdef METAC_1_2
+#define TXUCT_MASK 0xFF0FFFFF /* Valid regs 0..31 */
+#else
+#define TXUCT_MASK 0xFF1FFFFF /* Valid regs 0..31 */
+#endif
+#define TGUCT_MASK 0x00000000 /* No global regs */
+#define TXUD0_ID 0x1 /* Data unit regs */
+#define TXUD1_ID 0x2
+#define TXUDX_MASK 0xFFFFFFFF /* Valid regs 0..31 */
+#define TGUDX_MASK 0xFFFF0000 /* Global regs for base inst */
+#define TXUDXDSP_MASK 0x0F0FFFFF /* Valid DSP regs */
+#define TGUDXDSP_MASK 0x0E0E0000 /* Global DSP ACC regs */
+#define TXUA0_ID 0x3 /* Address unit regs */
+#define TXUA1_ID 0x4
+#define TXUAX_MASK 0x0000FFFF /* Valid regs 0-15 */
+#define TGUAX_MASK 0x0000FF00 /* Global regs 8-15 */
+#define TXUPC_ID 0x5 /* PC registers */
+#define TXUPC_MASK 0x00000003 /* Valid regs 0- 1 */
+#define TGUPC_MASK 0x00000000 /* No global regs */
+#define TXUPORT_ID 0x6 /* Ports are not registers */
+#define TXUTR_ID 0x7
+#define TXUTR_MASK 0x0000005F /* Valid regs 0-3,4,6 */
+#define TGUTR_MASK 0x00000000 /* No global regs */
+#ifdef METAC_2_1
+#define TXUTT_ID 0x8
+#define TXUTT_MASK 0x0000000F /* Valid regs 0-3 */
+#define TGUTT_MASK 0x00000010 /* Global reg 4 */
+#define TXUFP_ID 0x9 /* FPU regs */
+#define TXUFP_MASK 0x0000FFFF /* Valid regs 0-15 */
+#define TGUFP_MASK 0x00000000 /* No global regs */
+#endif /* METAC_2_1 */
+
+#ifdef METAC_1_2
+#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \
+ TXUAX_MASK, TXUPC_MASK, 0, TXUTR_MASK, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \
+ TGUAX_MASK, TGUPC_MASK, 0, TGUTR_MASK, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+#else /* METAC_1_2 */
+#define TXUXX_MASKS { TXUCT_MASK, TXUDX_MASK, TXUDX_MASK, TXUAX_MASK, \
+ TXUAX_MASK, TXUPC_MASK, 0, TXUTR_MASK, \
+ TXUTT_MASK, TXUFP_MASK, 0, 0, \
+ 0, 0, 0, 0 }
+#define TGUXX_MASKS { TGUCT_MASK, TGUDX_MASK, TGUDX_MASK, TGUAX_MASK, \
+ TGUAX_MASK, TGUPC_MASK, 0, TGUTR_MASK, \
+ TGUTT_MASK, TGUFP_MASK, 0, 0, \
+ 0, 0, 0, 0 }
+#endif /* !METAC_1_2 */
+
+#define TXUXXDSP_MASKS { 0, TXUDXDSP_MASK, TXUDXDSP_MASK, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+#define TGUXXDSP_MASKS { 0, TGUDXDSP_MASK, TGUDXDSP_MASK, 0, 0, 0, 0, 0, \
+ 0, 0, 0, 0, 0, 0, 0, 0 }
+
+/* -------------------------------------------------------------------------
+; DATA AND ADDRESS UNIT REGISTERS
+; -----------------------------------------------------------------------*/
+/*
+ Thread local D0 registers
+ */
+/* D0.0 ; Holds 32-bit result, can be used as scratch */
+#define D0Re0 D0.0
+/* D0.1 ; Used to pass Arg6_32 */
+#define D0Ar6 D0.1
+/* D0.2 ; Used to pass Arg4_32 */
+#define D0Ar4 D0.2
+/* D0.3 ; Used to pass Arg2_32 to a called routine (see D1.3 below) */
+#define D0Ar2 D0.3
+/* D0.4 ; Can be used as scratch; used to save A0FrP in entry sequences */
+#define D0FrT D0.4
+/* D0.5 ; C compiler assumes preservation, save with D1.5 if used */
+/* D0.6 ; C compiler assumes preservation, save with D1.6 if used */
+/* D0.7 ; C compiler assumes preservation, save with D1.7 if used */
+/* D0.8 ; Use of D0.8 and above is not encouraged */
+/* D0.9 */
+/* D0.10 */
+/* D0.11 */
+/* D0.12 */
+/* D0.13 */
+/* D0.14 */
+/* D0.15 */
+/*
+ Thread local D1 registers
+ */
+/* D1.0 ; Holds top 32-bits of 64-bit result, can be used as scratch */
+#define D1Re0 D1.0
+/* D1.1 ; Used to pass Arg5_32 */
+#define D1Ar5 D1.1
+/* D1.2 ; Used to pass Arg3_32 */
+#define D1Ar3 D1.2
+/* D1.3 ; Used to pass Arg1_32 (first 32-bit argument) to a called routine */
+#define D1Ar1 D1.3
+/* D1.4 ; Used for Return Pointer, save during entry with A0FrP (via D0.4) */
+#define D1RtP D1.4
+/* D1.5 ; C compiler assumes preservation, save if used */
+/* D1.6 ; C compiler assumes preservation, save if used */
+/* D1.7 ; C compiler assumes preservation, save if used */
+/* D1.8 ; Use of D1.8 and above is not encouraged */
+/* D1.9 */
+/* D1.10 */
+/* D1.11 */
+/* D1.12 */
+/* D1.13 */
+/* D1.14 */
+/* D1.15 */
+/*
+ Thread local A0 registers
+ */
+/* A0.0 ; Primary stack pointer */
+#define A0StP A0.0
+/* A0.1 ; Used as local frame pointer in C, save if used (via D0.4) */
+#define A0FrP A0.1
+/* A0.2 */
+/* A0.3 */
+/* A0.4 ; Use of A0.4 and above is not encouraged */
+/* A0.5 */
+/* A0.6 */
+/* A0.7 */
+/*
+ Thread local A1 registers
+ */
+/* A1.0 ; Global static chain pointer - do not modify */
+#define A1GbP A1.0
+/* A1.1 ; Local static chain pointer in C, can be used as scratch */
+#define A1LbP A1.1
+/* A1.2 */
+/* A1.3 */
+/* A1.4 ; Use of A1.4 and above is not encouraged */
+/* A1.5 */
+/* A1.6 */
+/* A1.7 */
+#ifdef METAC_2_1
+/* Renameable registers for use with Fast Interrupts */
+/* The interrupt stack pointer (usually a global register) */
+#define A0IStP A0IReg
+/* The interrupt global pointer (usually a global register) */
+#define A1IGbP A1IReg
+#endif
+/*
+ Further registers may be globally allocated via linkage/loading tools,
+ normally they are not used.
+ */
+/*-------------------------------------------------------------------------
+; STACK STRUCTURE and CALLING CONVENTION
+; -----------------------------------------------------------------------*/
+/*
+; Calling convention indicates that the following is the state of the
+; stack frame at the start of a routine-
+;
+; Arg9_32 [A0StP+#-12]
+; Arg8_32 [A0StP+#- 8]
+; Arg7_32 [A0StP+#- 4]
+; A0StP->
+;
+; Registers D1.3, D0.3, ..., to D0.1 are used to pass Arg1_32 to Arg6_32
+; respectively. If a routine needs to store them on the stack in order
+; to make sub-calls or because of the general complexity of the routine it
+; is best to dump these registers immediately at the start of a routine
+; using a MSETL or SETL instruction-
+;
+; MSETL [A0StP],D0Ar6,D0Ar4,D0Ar2; Only dump argments expected
+;or SETL [A0StP+#8++],D0Ar2 ; Up to two 32-bit args expected
+;
+; For non-leaf routines it is always necessary to save and restore at least
+; the return address value D1RtP on the stack. Also by convention if the
+; frame is saved then a new A0FrP value must be set-up. So for non-leaf
+; routines at this point both these registers must be saved onto the stack
+; using a SETL instruction and the new A0FrP value is then set-up-
+;
+; MOV D0FrT,A0FrP
+; ADD A0FrP,A0StP,#0
+; SETL [A0StP+#8++],D0FrT,D1RtP
+;
+; Registers D0.5, D1.5, to D1.7 are assumed to be preserved across calls so
+; a SETL or MSETL instruction can be used to save the current state
+; of these registers if they are modified by the current routine-
+;
+; MSETL [A0StP],D0.5,D0.6,D0.7 ; Only save registers modified
+;or SETL [A0StP+#8++],D0.5 ; Only D0.5 and/or D1.5 modified
+;
+; All of the above sequences can be combined into one maximal case-
+;
+; MOV D0FrT,A0FrP ; Save and calculate new frame pointer
+; ADD A0FrP,A0StP,#(ARS)
+; MSETL [A0StP],D0Ar6,D0Ar4,D0Ar2,D0FrT,D0.5,D0.6,D0.7
+;
+; Having completed the above sequence the only remaining task on routine
+; entry is to reserve any local and outgoing argment storage space on the
+; stack. This instruction may be omitted if the size of this region is zero-
+;
+; ADD A0StP,A0StP,#(LCS)
+;
+; LCS is the first example use of one of a number of standard local defined
+; values that can be created to make assembler code more readable and
+; potentially more robust-
+;
+; #define ARS 0x18 ; Register arg bytes saved on stack
+; #define FRS 0x20 ; Frame save area size in bytes
+; #define LCS 0x00 ; Locals and Outgoing arg size
+; #define ARO (LCS+FRS) ; Stack offset to access args
+;
+; All of the above defines should be undefined (#undef) at the end of each
+; routine to avoid accidental use in the next routine.
+;
+; Given all of the above the following stack structure is expected during
+; the body of a routine if all args passed in registers are saved during
+; entry-
+;
+; ; 'Incoming args area'
+; Arg10_32 [A0StP+#-((10*4)+ARO)] Arg9_32 [A0StP+#-(( 9*4)+ARO)]
+; Arg8_32 [A0StP+#-(( 8*4)+ARO)] Arg7_32 [A0StP+#-(( 7*4)+ARO)]
+;--- Call point
+; D0Ar6= Arg6_32 [A0StP+#-(( 6*4)+ARO)] D1Ar5=Arg5_32 [A0StP+#-(( 5*4)+ARO)]
+; D0Ar4= Arg4_32 [A0StP+#-(( 4*4)+ARO)] D1Ar3=Arg3_32 [A0StP+#-(( 3*4)+ARO)]
+; D0Ar2= Arg2_32 [A0StP+#-(( 2*4)+ARO)] D1Ar2=Arg1_32 [A0StP+#-(( 1*4)+ARO)]
+; ; 'Frame area'
+; A0FrP-> D0FrT, D1RtP,
+; D0.5, D1.5,
+; D0.6, D1.6,
+; D0.7, D1.7,
+; ; 'Locals area'
+; Loc0_32 [A0StP+# (( 0*4)-LCS)], Loc1_32 [A0StP+# (( 1*4)-LCS)]
+; .... other locals
+; Locn_32 [A0StP+# (( n*4)-LCS)]
+; ; 'Outgoing args area'
+; Outm_32 [A0StP+#- ( m*4)] .... other outgoing args
+; Out8_32 [A0StP+#- ( 1*4)] Out7_32 [A0StP+#- ( 1*4)]
+; A0StP-> (Out1_32-Out6_32 in regs D1Ar1-D0Ar6)
+;
+; The exit sequence for a non-leaf routine can use the frame pointer created
+; in the entry sequence to optimise the recovery of the full state-
+;
+; MGETL D0FrT,D0.5,D0.6,D0.7,[A0FrP]
+; SUB A0StP,A0FrP,#(ARS+FRS)
+; MOV A0FrP,D0FrT
+; MOV PC,D1RtP
+;
+; Having described the most complex non-leaf case above, it is worth noting
+; that if a routine is a leaf and does not use any of the caller-preserved
+; state. The routine can be implemented as-
+;
+; ADD A0StP,A0StP,#LCS
+; .... body of routine
+; SUB A0StP,A0StP,#LCS
+; MOV PC,D1RtP
+;
+; The stack adjustments can also be omitted if no local storage is required.
+;
+; Another exit sequence structure is more applicable if for a leaf routine
+; with no local frame pointer saved/generated in which the call saved
+; registers need to be saved and restored-
+;
+; MSETL [A0StP],D0.5,D0.6,D0.7 ; Hence FRS is 0x18, ARS is 0x00
+; ADD A0StP,A0StP,#LCS
+; .... body of routine
+; GETL D0.5,D1.5,[A0StP+#((0*8)-(FRS+LCS))]
+; GETL D0.6,D1.6,[A0StP+#((1*8)-(FRS+LCS))]
+; GETL D0.7,D1.7,[A0StP+#((2*8)-(FRS+LCS))]
+; SUB A0StP,A0StP,#(ARS+FRS+LCS)
+; MOV PC,D1RtP
+;
+; Lastly, to support profiling assembler code should use a fixed entry/exit
+; sequence if the trigger define _GMON_ASM is defined-
+;
+; #ifndef _GMON_ASM
+; ... optimised entry code
+; #else
+; ; Profiling entry case
+; MOV D0FrT,A0FrP ; Save and calculate new frame pointer
+; ADD A0FrP,A0StP,#(ARS)
+; MSETL [A0StP],...,D0FrT,... or SETL [A0FrP],D0FrT,D1RtP
+; CALLR D0FrT,_mcount_wrapper
+; #endif
+; ... body of routine
+; #ifndef _GMON_ASM
+; ... optimised exit code
+; #else
+; ; Profiling exit case
+; MGETL D0FrT,...,[A0FrP] or GETL D0FrT,D1RtP,[A0FrP++]
+; SUB A0StP,A0FrP,#(ARS+FRS)
+; MOV A0FrP,D0FrT
+; MOV PC,D1RtP
+; #endif
+
+
+; -------------------------------------------------------------------------
+; CONTROL UNIT REGISTERS
+; -------------------------------------------------------------------------
+;
+; See the assembler guide, hardware documentation, or the field values
+; defined below for some details of the use of these registers.
+*/
+#define TXENABLE CT.0 /* Need to define bit-field values in these */
+#define TXMODE CT.1
+#define TXSTATUS CT.2 /* DEFAULT 0x00020000 */
+#define TXRPT CT.3
+#define TXTIMER CT.4
+#define TXL1START CT.5
+#define TXL1END CT.6
+#define TXL1COUNT CT.7
+#define TXL2START CT.8
+#define TXL2END CT.9
+#define TXL2COUNT CT.10
+#define TXBPOBITS CT.11
+#define TXMRSIZE CT.12
+#define TXTIMERI CT.13
+#define TXDRCTRL CT.14 /* DEFAULT 0x0XXXF0F0 */
+#define TXDRSIZE CT.15
+#define TXCATCH0 CT.16
+#define TXCATCH1 CT.17
+#define TXCATCH2 CT.18
+#define TXCATCH3 CT.19
+
+#ifdef METAC_2_1
+#define TXDEFR CT.20
+#define TXCPRS CT.21
+#endif
+
+#define TXINTERN0 CT.23
+#define TXAMAREG0 CT.24
+#define TXAMAREG1 CT.25
+#define TXAMAREG2 CT.26
+#define TXAMAREG3 CT.27
+#define TXDIVTIME CT.28 /* DEFAULT 0x00000001 */
+#define TXPRIVEXT CT.29 /* DEFAULT 0x003B0000 */
+#define TXTACTCYC CT.30
+#define TXIDLECYC CT.31
+
+/*****************************************************************************
+ * CONTROL UNIT REGISTER BITS
+ ****************************************************************************/
+/*
+ * The following registers and where appropriate the sub-fields of those
+ * registers are defined for pervasive use in controlling program flow.
+ */
+
+/*
+ * TXENABLE register fields - only the thread id is routinely useful
+ */
+#define TXENABLE_REGNUM 0
+#define TXENABLE_THREAD_BITS 0x00000700
+#define TXENABLE_THREAD_S 8
+#define TXENABLE_REV_STEP_BITS 0x000000F0
+#define TXENABLE_REV_STEP_S 4
+
+/*
+ * TXMODE register - controls extensions of the instruction set
+ */
+#define TXMODE_REGNUM 1
+#define TXMODE_DEFAULT 0 /* All fields default to zero */
+
+/*
+ * TXSTATUS register - contains a couple of stable bits that can be used
+ * to determine the privilege processing level and interrupt
+ * processing level of the current thread.
+ */
+#define TXSTATUS_REGNUM 2
+#define TXSTATUS_PSTAT_BIT 0x00020000 /* -> Privilege active */
+#define TXSTATUS_PSTAT_S 17
+#define TXSTATUS_ISTAT_BIT 0x00010000 /* -> In interrupt state */
+#define TXSTATUS_ISTAT_S 16
+
+/*
+ * These are all relatively boring registers, mostly full 32-bit
+ */
+#define TXRPT_REGNUM 3 /* Repeat counter for XFR... instructions */
+#define TXTIMER_REGNUM 4 /* Timer-- causes timer trigger on overflow */
+#define TXL1START_REGNUM 5 /* Hardware Loop 1 Start-PC/End-PC/Count */
+#define TXL1END_REGNUM 6
+#define TXL1COUNT_REGNUM 7
+#define TXL2START_REGNUM 8 /* Hardware Loop 2 Start-PC/End-PC/Count */
+#define TXL2END_REGNUM 9
+#define TXL2COUNT_REGNUM 10
+#define TXBPOBITS_REGNUM 11 /* Branch predict override bits - tune perf */
+#define TXTIMERI_REGNUM 13 /* Timer-- time based interrupt trigger */
+
+/*
+ * TXDIVTIME register is routinely read to calculate the time-base for
+ * the TXTIMER register.
+ */
+#define TXDIVTIME_REGNUM 28
+#define TXDIVTIME_DIV_BITS 0x000000FF
+#define TXDIVTIME_DIV_S 0
+#define TXDIVTIME_DIV_MIN 0x00000001 /* Maximum resolution */
+#define TXDIVTIME_DIV_MAX 0x00000100 /* 1/1 -> 1/256 resolution */
+#define TXDIVTIME_BASE_HZ 1000000 /* Timers run at 1Mhz @1/1 */
+
+/*
+ * TXPRIVEXT register can be consulted to decide if write access to a
+ * part of the threads register set is not permitted when in
+ * unprivileged mode (PSTAT == 0).
+ */
+#define TXPRIVEXT_REGNUM 29
+#define TXPRIVEXT_COPRO_BITS 0xFF000000 /* Co-processor 0-7 */
+#define TXPRIVEXT_COPRO_S 24
+#define TXPRIVEXT_TXTRIGGER_BIT 0x00020000 /* TXSTAT|TXMASK|TXPOLL */
+#define TXPRIVEXT_TXGBLCREG_BIT 0x00010000 /* Global common regs */
+#define TXPRIVEXT_CBPRIV_BIT 0x00008000 /* Mem i/f dump priv */
+#define TXPRIVEXT_ILOCK_BIT 0x00004000 /* LOCK inst priv */
+#define TXPRIVEXT_TXITACCYC_BIT 0x00002000 /* TXIDLECYC|TXTACTCYC */
+#define TXPRIVEXT_TXDIVTIME_BIT 0x00001000 /* TXDIVTIME priv */
+#define TXPRIVEXT_TXAMAREGX_BIT 0x00000800 /* TXAMAREGX priv */
+#define TXPRIVEXT_TXTIMERI_BIT 0x00000400 /* TXTIMERI priv */
+#define TXPRIVEXT_TXSTATUS_BIT 0x00000200 /* TXSTATUS priv */
+#define TXPRIVEXT_TXDISABLE_BIT 0x00000100 /* TXENABLE priv */
+#ifndef METAC_1_2
+#define TXPRIVEXT_MINIMON_BIT 0x00000080 /* Enable Minim features */
+#define TXPRIVEXT_OLDBCCON_BIT 0x00000020 /* Restore Static predictions */
+#define TXPRIVEXT_ALIGNREW_BIT 0x00000010 /* Align & precise checks */
+#endif
+#define TXPRIVEXT_KEEPPRI_BIT 0x00000008 /* Use AMA_Priority if ISTAT=1*/
+#define TXPRIVEXT_TXTOGGLEI_BIT 0x00000001 /* TX.....I priv */
+
+/*
+ * TXTACTCYC register - counts instructions issued for this thread
+ */
+#define TXTACTCYC_REGNUM 30
+#define TXTACTCYC_COUNT_MASK 0x00FFFFFF
+
+/*
+ * TXIDLECYC register - counts idle cycles
+ */
+#define TXIDLECYC_REGNUM 31
+#define TXIDLECYC_COUNT_MASK 0x00FFFFFF
+
+/*****************************************************************************
+ * DSP EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following values relate to fields and controls that only a program
+ * using the DSP extensions of the META instruction set need to know.
+ */
+
+
+#ifndef METAC_1_2
+/*
+ * Allow co-processor hardware to replace the read pipeline data source in
+ * appropriate cases.
+ */
+#define TXMODE_RDCPEN_BIT 0x00800000
+#endif
+
+/*
+ * Address unit addressing modes
+ */
+#define TXMODE_A1ADDR_BITS 0x00007000
+#define TXMODE_A1ADDR_S 12
+#define TXMODE_A0ADDR_BITS 0x00000700
+#define TXMODE_A0ADDR_S 8
+#define TXMODE_AXADDR_MODULO 3
+#define TXMODE_AXADDR_REVB 4
+#define TXMODE_AXADDR_REVW 5
+#define TXMODE_AXADDR_REVD 6
+#define TXMODE_AXADDR_REVL 7
+
+/*
+ * Data unit OverScale select (default 0 -> normal, 1 -> top 16 bits)
+ */
+#define TXMODE_DXOVERSCALE_BIT 0x00000080
+
+/*
+ * Data unit MX mode select (default 0 -> MX16, 1 -> MX8)
+ */
+#define TXMODE_M8_BIT 0x00000040
+
+/*
+ * Data unit accumulator saturation point (default -> 40 bit accumulator)
+ */
+#define TXMODE_DXACCSAT_BIT 0x00000020 /* Set for 32-bit accumulator */
+
+/*
+ * Data unit accumulator saturation enable (default 0 -> no saturation)
+ */
+#define TXMODE_DXSAT_BIT 0x00000010
+
+/*
+ * Data unit master rounding control (default 0 -> normal, 1 -> convergent)
+ */
+#define TXMODE_DXROUNDING_BIT 0x00000008
+
+/*
+ * Data unit product shift for fractional arithmetic (default off)
+ */
+#define TXMODE_DXPRODSHIFT_BIT 0x00000004
+
+/*
+ * Select the arithmetic mode (multiply mostly) for both data units
+ */
+#define TXMODE_DXARITH_BITS 0x00000003
+#define TXMODE_DXARITH_32 3
+#define TXMODE_DXARITH_32H 2
+#define TXMODE_DXARITH_S16 1
+#define TXMODE_DXARITH_16 0
+
+/*
+ * TXMRSIZE register value only relevant when DSP modulo addressing active
+ */
+#define TXMRSIZE_REGNUM 12
+#define TXMRSIZE_MIN 0x0002 /* 0, 1 -> normal addressing logic */
+#define TXMRSIZE_MAX 0xFFFF
+
+/*
+ * TXDRCTRL register can be used to detect the actaul size of the DSP RAM
+ * partitions allocated to this thread.
+ */
+#define TXDRCTRL_REGNUM 14
+#define TXDRCTRL_SINESIZE_BITS 0x0F000000
+#define TXDRCTRL_SINESIZE_S 24
+#define TXDRCTRL_RAMSZPOW_BITS 0x001F0000 /* Limit = (1<<RAMSZPOW)-1 */
+#define TXDRCTRL_RAMSZPOW_S 16
+#define TXDRCTRL_D1RSZAND_BITS 0x0000F000 /* Mask top 4 bits - D1 */
+#define TXDRCTRL_D1RSZAND_S 12
+#define TXDRCTRL_D0RSZAND_BITS 0x000000F0 /* Mask top 4 bits - D0 */
+#define TXDRCTRL_D0RSZAND_S 4
+/* Given extracted RAMSZPOW and DnRSZAND fields this returns the size */
+#define TXDRCTRL_DXSIZE(Pow, AndBits) \
+ ((((~(AndBits)) & 0x0f) + 1) << ((Pow)-4))
+
+/*
+ * TXDRSIZE register provides modulo addressing options for each DSP RAM
+ */
+#define TXDRSIZE_REGNUM 15
+#define TXDRSIZE_R1MOD_BITS 0xFFFF0000
+#define TXDRSIZE_R1MOD_S 16
+#define TXDRSIZE_R0MOD_BITS 0x0000FFFF
+#define TXDRSIZE_R0MOD_S 0
+
+#define TXDRSIZE_RBRAD_SCALE_BITS 0x70000000
+#define TXDRSIZE_RBRAD_SCALE_S 28
+#define TXDRSIZE_RBMODSIZE_BITS 0x0FFF0000
+#define TXDRSIZE_RBMODSIZE_S 16
+#define TXDRSIZE_RARAD_SCALE_BITS 0x00007000
+#define TXDRSIZE_RARAD_SCALE_S 12
+#define TXDRSIZE_RAMODSIZE_BITS 0x00000FFF
+#define TXDRSIZE_RAMODSIZE_S 0
+
+/*****************************************************************************
+ * DEFERRED and BUS ERROR EXTENSION
+ ****************************************************************************/
+
+/*
+ * TXDEFR register - Deferred exception control
+ */
+#define TXDEFR_REGNUM 20
+#define TXDEFR_DEFAULT 0 /* All fields default to zero */
+
+/*
+ * Bus error state is a multi-bit positive/negative event notification from
+ * the bus infrastructure.
+ */
+#define TXDEFR_BUS_ERR_BIT 0x80000000 /* Set if error (LSB STATE) */
+#define TXDEFR_BUS_ERRI_BIT 0x40000000 /* Fetch returned error */
+#define TXDEFR_BUS_STATE_BITS 0x3F000000 /* Bus event/state data */
+#define TXDEFR_BUS_STATE_S 24
+#define TXDEFR_BUS_TRIG_BIT 0x00800000 /* Set when bus error seen */
+
+/*
+ * Bus events are collected by background code in a deferred manner unless
+ * selected to trigger an extended interrupt HALT trigger when they occur.
+ */
+#define TXDEFR_BUS_ICTRL_BIT 0x00000080 /* Enable interrupt trigger */
+
+/*
+ * CHIP Automatic Mips Allocation control registers
+ * ------------------------------------------------
+ */
+
+/* CT Bank AMA Registers */
+#define TXAMAREG0_REGNUM 24
+#ifdef METAC_1_2
+#define TXAMAREG0_CTRL_BITS 0x07000000
+#else /* METAC_1_2 */
+#define TXAMAREG0_RCOFF_BIT 0x08000000
+#define TXAMAREG0_DLINEHLT_BIT 0x04000000
+#define TXAMAREG0_DLINEDIS_BIT 0x02000000
+#define TXAMAREG0_CYCSTRICT_BIT 0x01000000
+#define TXAMAREG0_CTRL_BITS (TXAMAREG0_RCOFF_BIT | \
+ TXAMAREG0_DLINEHLT_BIT | \
+ TXAMAREG0_DLINEDIS_BIT | \
+ TXAMAREG0_CYCSTRICT_BIT)
+#endif /* !METAC_1_2 */
+#define TXAMAREG0_CTRL_S 24
+#define TXAMAREG0_MDM_BIT 0x00400000
+#define TXAMAREG0_MPF_BIT 0x00200000
+#define TXAMAREG0_MPE_BIT 0x00100000
+#define TXAMAREG0_MASK_BITS (TXAMAREG0_MDM_BIT | \
+ TXAMAREG0_MPF_BIT | \
+ TXAMAREG0_MPE_BIT)
+#define TXAMAREG0_MASK_S 20
+#define TXAMAREG0_SDM_BIT 0x00040000
+#define TXAMAREG0_SPF_BIT 0x00020000
+#define TXAMAREG0_SPE_BIT 0x00010000
+#define TXAMAREG0_STATUS_BITS (TXAMAREG0_SDM_BIT | \
+ TXAMAREG0_SPF_BIT | \
+ TXAMAREG0_SPE_BIT)
+#define TXAMAREG0_STATUS_S 16
+#define TXAMAREG0_PRIORITY_BITS 0x0000FF00
+#define TXAMAREG0_PRIORITY_S 8
+#define TXAMAREG0_BVALUE_BITS 0x000000FF
+#define TXAMAREG0_BVALUE_S 0
+
+#define TXAMAREG1_REGNUM 25
+#define TXAMAREG1_DELAYC_BITS 0x07FFFFFF
+#define TXAMAREG1_DELAYC_S 0
+
+#define TXAMAREG2_REGNUM 26
+#ifdef METAC_1_2
+#define TXAMAREG2_DLINEC_BITS 0x00FFFFFF
+#define TXAMAREG2_DLINEC_S 0
+#else /* METAC_1_2 */
+#define TXAMAREG2_IRQPRIORITY_BIT 0xFF000000
+#define TXAMAREG2_IRQPRIORITY_S 24
+#define TXAMAREG2_DLINEC_BITS 0x00FFFFF0
+#define TXAMAREG2_DLINEC_S 4
+#endif /* !METAC_1_2 */
+
+#define TXAMAREG3_REGNUM 27
+#define TXAMAREG2_AMABLOCK_BIT 0x00080000
+#define TXAMAREG2_AMAC_BITS 0x0000FFFF
+#define TXAMAREG2_AMAC_S 0
+
+/*****************************************************************************
+ * FPU EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following registers only exist in FPU enabled cores.
+ */
+
+/*
+ * TXMODE register - FPU rounding mode control/status fields
+ */
+#define TXMODE_FPURMODE_BITS 0x00030000
+#define TXMODE_FPURMODE_S 16
+#define TXMODE_FPURMODEWRITE_BIT 0x00040000 /* Set to change FPURMODE */
+
+/*
+ * TXDEFR register - FPU exception handling/state is a significant source
+ * of deferrable errors. Run-time S/W can move handling to interrupt level
+ * using DEFR instruction to collect state.
+ */
+#define TXDEFR_FPE_FE_BITS 0x003F0000 /* Set by FPU_FE events */
+#define TXDEFR_FPE_FE_S 16
+
+#define TXDEFR_FPE_INEXACT_FE_BIT 0x010000
+#define TXDEFR_FPE_UNDERFLOW_FE_BIT 0x020000
+#define TXDEFR_FPE_OVERFLOW_FE_BIT 0x040000
+#define TXDEFR_FPE_DIVBYZERO_FE_BIT 0x080000
+#define TXDEFR_FPE_INVALID_FE_BIT 0x100000
+#define TXDEFR_FPE_DENORMAL_FE_BIT 0x200000
+
+#define TXDEFR_FPE_ICTRL_BITS 0x000003F /* Route to interrupts */
+#define TXDEFR_FPE_ICTRL_S 0
+
+#define TXDEFR_FPE_INEXACT_ICTRL_BIT 0x01
+#define TXDEFR_FPE_UNDERFLOW_ICTRL_BIT 0x02
+#define TXDEFR_FPE_OVERFLOW_ICTRL_BIT 0x04
+#define TXDEFR_FPE_DIVBYZERO_ICTRL_BIT 0x08
+#define TXDEFR_FPE_INVALID_ICTRL_BIT 0x10
+#define TXDEFR_FPE_DENORMAL_ICTRL_BIT 0x20
+
+/*
+ * DETAILED FPU RELATED VALUES
+ * ---------------------------
+ */
+
+/*
+ * Rounding mode field in TXMODE can hold a number of logical values
+ */
+#define METAG_FPURMODE_TONEAREST 0x0 /* Default */
+#define METAG_FPURMODE_TOWARDZERO 0x1
+#define METAG_FPURMODE_UPWARD 0x2
+#define METAG_FPURMODE_DOWNWARD 0x3
+
+/*
+ * In order to set the TXMODE register field that controls the rounding mode
+ * an extra bit must be set in the value written versus that read in order
+ * to gate writes to the rounding mode field. This allows other non-FPU code
+ * to modify TXMODE without knowledge of the FPU units presence and not
+ * influence the FPU rounding mode. This macro adds the required bit so new
+ * rounding modes are accepted.
+ */
+#define TXMODE_FPURMODE_SET(FPURMode) \
+ (TXMODE_FPURMODEWRITE_BIT + ((FPURMode)<<TXMODE_FPURMODE_S))
+
+/*
+ * To successfully restore TXMODE to zero at the end of the function the
+ * following value (rather than zero) must be used.
+ */
+#define TXMODE_FPURMODE_RESET (TXMODE_FPURMODEWRITE_BIT)
+
+/*
+ * In TXSTATUS a special bit exists to indicate if FPU H/W has been accessed
+ * since it was last reset.
+ */
+#define TXSTATUS_FPACTIVE_BIT 0x01000000
+
+/*
+ * Exception state (see TXDEFR_FPU_FE_*) and enabling (for interrupt
+ * level processing (see TXDEFR_FPU_ICTRL_*) are controlled by similar
+ * bit mask locations within each field.
+ */
+#define METAG_FPU_FE_INEXACT 0x01
+#define METAG_FPU_FE_UNDERFLOW 0x02
+#define METAG_FPU_FE_OVERFLOW 0x04
+#define METAG_FPU_FE_DIVBYZERO 0x08
+#define METAG_FPU_FE_INVALID 0x10
+#define METAG_FPU_FE_DENORMAL 0x20
+#define METAG_FPU_FE_ALL_EXCEPT (METAG_FPU_FE_INEXACT | \
+ METAG_FPU_FE_UNDERFLOW | \
+ METAG_FPU_FE_OVERFLOW | \
+ METAG_FPU_FE_DIVBYZERO | \
+ METAG_FPU_FE_INVALID | \
+ METAG_FPU_FE_DENORMAL)
+
+/*****************************************************************************
+ * THREAD CONTROL, ERROR, OR INTERRUPT STATE EXTENSIONS
+ ****************************************************************************/
+/*
+ * The following values are only relevant to code that externally controls
+ * threads, handles errors/interrupts, and/or set-up interrupt/error handlers
+ * for subsequent use.
+ */
+
+/*
+ * TXENABLE register fields - only ENABLE_BIT is potentially read/write
+ */
+#define TXENABLE_MAJOR_REV_BITS 0xFF000000
+#define TXENABLE_MAJOR_REV_S 24
+#define TXENABLE_MINOR_REV_BITS 0x00FF0000
+#define TXENABLE_MINOR_REV_S 16
+#define TXENABLE_CLASS_BITS 0x0000F000
+#define TXENABLE_CLASS_S 12
+#define TXENABLE_CLASS_DSP 0x0 /* -> DSP Thread */
+#define TXENABLE_CLASS_LDSP 0x8 /* -> DSP LITE Thread */
+#define TXENABLE_CLASS_GP 0xC /* -> General Purpose Thread */
+#define TXENABLE_CLASSALT_LFPU 0x2 /* Set to indicate LITE FPU */
+#define TXENABLE_CLASSALT_FPUR8 0x1 /* Set to indicate 8xFPU regs */
+#define TXENABLE_MTXARCH_BIT 0x00000800
+#define TXENABLE_STEP_REV_BITS 0x000000F0
+#define TXENABLE_STEP_REV_S 4
+#define TXENABLE_STOPPED_BIT 0x00000004 /* TXOFF due to ENABLE->0 */
+#define TXENABLE_OFF_BIT 0x00000002 /* Thread is in off state */
+#define TXENABLE_ENABLE_BIT 0x00000001 /* Set if running */
+
+/*
+ * TXSTATUS register - used by external/internal interrupt/error handler
+ */
+#define TXSTATUS_CB1MARKER_BIT 0x00800000 /* -> int level mem state */
+#define TXSTATUS_CBMARKER_BIT 0x00400000 /* -> mem i/f state dumped */
+#define TXSTATUS_MEM_FAULT_BITS 0x00300000
+#define TXSTATUS_MEM_FAULT_S 20
+#define TXSTATUS_MEMFAULT_NONE 0x0 /* -> No memory fault */
+#define TXSTATUS_MEMFAULT_GEN 0x1 /* -> General fault */
+#define TXSTATUS_MEMFAULT_PF 0x2 /* -> Page fault */
+#define TXSTATUS_MEMFAULT_RO 0x3 /* -> Read only fault */
+#define TXSTATUS_MAJOR_HALT_BITS 0x000C0000
+#define TXSTATUS_MAJOR_HALT_S 18
+#define TXSTATUS_MAJHALT_TRAP 0x0 /* -> SWITCH inst used */
+#define TXSTATUS_MAJHALT_INST 0x1 /* -> Unknown inst or fetch */
+#define TXSTATUS_MAJHALT_PRIV 0x2 /* -> Internal privilege */
+#define TXSTATUS_MAJHALT_MEM 0x3 /* -> Memory i/f fault */
+#define TXSTATUS_L_STEP_BITS 0x00000800 /* -> Progress of L oper */
+#define TXSTATUS_LSM_STEP_BITS 0x00000700 /* -> Progress of L/S mult */
+#define TXSTATUS_LSM_STEP_S 8
+#define TXSTATUS_FLAG_BITS 0x0000001F /* -> All the flags */
+#define TXSTATUS_SCC_BIT 0x00000010 /* -> Split-16 flags ... */
+#define TXSTATUS_SCF_LZ_BIT 0x00000008 /* -> Split-16 Low Z flag */
+#define TXSTATUS_SCF_HZ_BIT 0x00000004 /* -> Split-16 High Z flag */
+#define TXSTATUS_SCF_HC_BIT 0x00000002 /* -> Split-16 High C flag */
+#define TXSTATUS_SCF_LC_BIT 0x00000001 /* -> Split-16 Low C flag */
+#define TXSTATUS_CF_Z_BIT 0x00000008 /* -> Condition Z flag */
+#define TXSTATUS_CF_N_BIT 0x00000004 /* -> Condition N flag */
+#define TXSTATUS_CF_O_BIT 0x00000002 /* -> Condition O flag */
+#define TXSTATUS_CF_C_BIT 0x00000001 /* -> Condition C flag */
+
+/*
+ * TXCATCH0-3 register contents may store information on a memory operation
+ * that has failed if the bit TXSTATUS_CBMARKER_BIT is set.
+ */
+#define TXCATCH0_REGNUM 16
+#define TXCATCH1_REGNUM 17
+#define TXCATCH1_ADDR_BITS 0xFFFFFFFF /* TXCATCH1 is Addr 0-31 */
+#define TXCATCH1_ADDR_S 0
+#define TXCATCH2_REGNUM 18
+#define TXCATCH2_DATA0_BITS 0xFFFFFFFF /* TXCATCH2 is Data 0-31 */
+#define TXCATCH2_DATA0_S 0
+#define TXCATCH3_REGNUM 19
+#define TXCATCH3_DATA1_BITS 0xFFFFFFFF /* TXCATCH3 is Data 32-63 */
+#define TXCATCH3_DATA1_S 0
+
+/*
+ * Detailed catch state information
+ * --------------------------------
+ */
+
+/* Contents of TXCATCH0 register */
+#define TXCATCH0_LDRXX_BITS 0xF8000000 /* Load destination reg 0-31 */
+#define TXCATCH0_LDRXX_S 27
+#define TXCATCH0_LDDST_BITS 0x07FF0000 /* Load destination bits */
+#define TXCATCH0_LDDST_S 16
+#define TXCATCH0_LDDST_D1DSP 0x400 /* One bit set if it's a LOAD */
+#define TXCATCH0_LDDST_D0DSP 0x200
+#define TXCATCH0_LDDST_TMPLT 0x100
+#define TXCATCH0_LDDST_TR 0x080
+#ifdef METAC_2_1
+#define TXCATCH0_LDDST_FPU 0x040
+#endif
+#define TXCATCH0_LDDST_PC 0x020
+#define TXCATCH0_LDDST_A1 0x010
+#define TXCATCH0_LDDST_A0 0x008
+#define TXCATCH0_LDDST_D1 0x004
+#define TXCATCH0_LDDST_D0 0x002
+#define TXCATCH0_LDDST_CT 0x001
+#ifdef METAC_2_1
+#define TXCATCH0_WATCHSTOP_BIT 0x00004000 /* Set if Data Watch set fault */
+#endif
+#define TXCATCH0_WATCHS_BIT 0x00004000 /* Set if Data Watch set fault */
+#define TXCATCH0_WATCH1_BIT 0x00002000 /* Set if Data Watch 1 matches */
+#define TXCATCH0_WATCH0_BIT 0x00001000 /* Set if Data Watch 0 matches */
+#define TXCATCH0_FAULT_BITS 0x00000C00 /* See TXSTATUS_MEMFAULT_* */
+#define TXCATCH0_FAULT_S 10
+#define TXCATCH0_PRIV_BIT 0x00000200 /* Privilege of transaction */
+#define TXCATCH0_READ_BIT 0x00000100 /* Set for Read or Load cases */
+
+#ifdef METAC_2_1
+/* LNKGET Marker bit in TXCATCH0 */
+#define TXCATCH0_LNKGET_MARKER_BIT 0x00000008
+#define TXCATCH0_PREPROC_BIT 0x00000004
+#endif
+
+/* Loads are indicated by one of the LDDST bits being set */
+#define TXCATCH0_LDM16_BIT 0x00000004 /* Load M16 flag */
+#define TXCATCH0_LDL2L1_BITS 0x00000003 /* Load data size L2,L1 */
+#define TXCATCH0_LDL2L1_S 0
+
+/* Reads are indicated by the READ bit being set without LDDST bits */
+#define TXCATCH0_RAXX_BITS 0x0000001F /* RAXX issue port for read */
+#define TXCATCH0_RAXX_S 0
+
+/* Write operations are all that remain if READ bit is not set */
+#define TXCATCH0_WMASK_BITS 0x000000FF /* Write byte lane mask */
+#define TXCATCH0_WMASK_S 0
+
+#ifdef METAC_2_1
+
+/* When a FPU exception is signalled then FPUSPEC == FPUSPEC_TAG */
+#define TXCATCH0_FPURDREG_BITS 0xF8000000
+#define TXCATCH0_FPURDREG_S 27
+#define TXCATCH0_FPUR1REG_BITS 0x07C00000
+#define TXCATCH0_FPUR1REG_S 22
+#define TXCATCH0_FPUSPEC_BITS 0x000F0000
+#define TXCATCH0_FPUSPEC_S 16
+#define TXCATCH0_FPUSPEC_TAG 0xF
+#define TXCATCH0_FPUINSTA_BIT 0x00001000
+#define TXCATCH0_FPUINSTQ_BIT 0x00000800
+#define TXCATCH0_FPUINSTZ_BIT 0x00000400
+#define TXCATCH0_FPUINSTN_BIT 0x00000200
+#define TXCATCH0_FPUINSTO3O_BIT 0x00000100
+#define TXCATCH0_FPUWIDTH_BITS 0x000000C0
+#define TXCATCH0_FPUWIDTH_S 6
+#define TXCATCH0_FPUWIDTH_FLOAT 0
+#define TXCATCH0_FPUWIDTH_DOUBLE 1
+#define TXCATCH0_FPUWIDTH_PAIRED 2
+#define TXCATCH0_FPUOPENC_BITS 0x0000003F
+#define TXCATCH0_FPUOPENC_S 0
+#define TXCATCH0_FPUOPENC_ADD 0 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_SUB 1 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_MUL 2 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_ATOI 3 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_ATOX 4 /* rop3=Rs, uses #Imm */
+#define TXCATCH0_FPUOPENC_ITOA 5 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_XTOA 6 /* rop3=Rs, uses #Imm */
+#define TXCATCH0_FPUOPENC_ATOH 7 /* rop2=Rs */
+#define TXCATCH0_FPUOPENC_HTOA 8 /* rop2=Rs */
+#define TXCATCH0_FPUOPENC_DTOF 9 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_FTOD 10 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_DTOL 11 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_LTOD 12 /* rop3=Rs */
+#define TXCATCH0_FPUOPENC_DTOXL 13 /* rop3=Rs, uses #imm */
+#define TXCATCH0_FPUOPENC_XLTOD 14 /* rop3=Rs, uses #imm */
+#define TXCATCH0_FPUOPENC_CMP 15 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MIN 16 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MAX 17 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_ADDRE 18 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_SUBRE 19 /* rop1=Rs1, rop3=Rs2 */
+#define TXCATCH0_FPUOPENC_MULRE 20 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MXA 21 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_MXAS 22 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_MAR 23 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MARS 24 /* rop1=Rs1, rop2=Rs2 */
+#define TXCATCH0_FPUOPENC_MUZ 25 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_MUZS 26 /* rop1=Rs1, rop2=Rs2, rop3=Rs3*/
+#define TXCATCH0_FPUOPENC_RCP 27 /* rop2=Rs */
+#define TXCATCH0_FPUOPENC_RSQ 28 /* rop2=Rs */
+
+/* For floating point exceptions TXCATCH1 is used to carry extra data */
+#define TXCATCH1_FPUR2REG_BITS 0xF8000000
+#define TXCATCH1_FPUR2REG_S 27
+#define TXCATCH1_FPUR3REG_BITS 0x07C00000 /* Undefined if O3O set */
+#define TXCATCH1_FPUR3REG_S 22
+#define TXCATCH1_FPUIMM16_BITS 0x0000FFFF
+#define TXCATCH1_FPUIMM16_S 0
+
+#endif /* METAC_2_1 */
+
+/*
+ * TXDIVTIME register used to hold the partial base address of memory i/f
+ * state dump area. Now deprecated.
+ */
+#define TXDIVTIME_CBBASE_MASK 0x03FFFE00
+#define TXDIVTIME_CBBASE_LINBASE 0x80000000
+#define TXDIVTIME_CBBASE_LINBOFF 0x00000000 /* BGnd state */
+#define TXDIVTIME_CBBASE_LINIOFF 0x00000100 /* Int state */
+
+/*
+ * TXDIVTIME register used to indicate if the read pipeline was dirty when a
+ * thread was interrupted, halted, or generated an exception. It is invalid
+ * to attempt to issue a further pipeline read address while the read
+ * pipeline is in the dirty state.
+ */
+#define TXDIVTIME_RPDIRTY_BIT 0x80000000
+
+/*
+ * Further bits in the TXDIVTIME register allow interrupt handling code to
+ * short-cut the discovery the most significant bit last read from TXSTATI.
+ *
+ * This is the bit number of the trigger line that a low level interrupt
+ * handler should acknowledge and then perhaps the index of a corresponding
+ * handler function.
+ */
+#define TXDIVTIME_IRQENC_BITS 0x0F000000
+#define TXDIVTIME_IRQENC_S 24
+
+/*
+ * If TXDIVTIME_RPVALID_BIT is set the read pipeline contained significant
+ * information when the thread was interrupted|halted|exceptioned. Each slot
+ * containing data is indicated by a one bit in the corresponding
+ * TXDIVTIME_RPMASK_BITS bit (least significance bit relates to first
+ * location in read pipeline - most likely to have the 1 state). Empty slots
+ * contain zeroes with no interlock applied on reads if RPDIRTY is currently
+ * set with RPMASK itself being read-only state.
+ */
+#define TXDIVTIME_RPMASK_BITS 0x003F0000 /* -> Full (1) Empty (0) */
+#define TXDIVTIME_RPMASK_S 16
+
+/*
+ * TXPRIVEXT register can be used to single step thread execution and
+ * enforce synchronous memory i/f address checking for debugging purposes.
+ */
+#define TXPRIVEXT_TXSTEP_BIT 0x00000004
+#define TXPRIVEXT_MEMCHECK_BIT 0x00000002
+
+/*
+ * TXINTERNx registers holds internal state information for H/W debugging only
+ */
+#define TXINTERN0_REGNUM 23
+#define TXINTERN0_LOCK2_BITS 0xF0000000
+#define TXINTERN0_LOCK2_S 28
+#define TXINTERN0_LOCK1_BITS 0x0F000000
+#define TXINTERN0_LOCK1_S 24
+#define TXINTERN0_TIFDF_BITS 0x0000F000
+#define TXINTERN0_TIFDF_S 12
+#define TXINTERN0_TIFIB_BITS 0x00000F00
+#define TXINTERN0_TIFIB_S 8
+#define TXINTERN0_TIFAF_BITS 0x000000F0
+#define TXINTERN0_TIFAF_S 4
+#define TXINTERN0_MSTATE_BITS 0x0000000F
+#define TXINTERN0_MSTATE_S 0
+
+/*
+ * TXSTAT, TXMASK, TXPOLL, TXSTATI, TXMASKI, TXPOLLI registers from trigger
+ * bank all have similar contents (upper kick count bits not in MASK regs)
+ */
+#define TXSTAT_REGNUM 0
+#define TXSTAT_TIMER_BIT 0x00000001
+#define TXSTAT_TIMER_S 0
+#define TXSTAT_KICK_BIT 0x00000002
+#define TXSTAT_KICK_S 1
+#define TXSTAT_DEFER_BIT 0x00000008
+#define TXSTAT_DEFER_S 3
+#define TXSTAT_EXTTRIG_BITS 0x0000FFF0
+#define TXSTAT_EXTTRIG_S 4
+#define TXSTAT_FPE_BITS 0x003F0000
+#define TXSTAT_FPE_S 16
+#define TXSTAT_FPE_DENORMAL_BIT 0x00200000
+#define TXSTAT_FPE_DENORMAL_S 21
+#define TXSTAT_FPE_INVALID_BIT 0x00100000
+#define TXSTAT_FPE_INVALID_S 20
+#define TXSTAT_FPE_DIVBYZERO_BIT 0x00080000
+#define TXSTAT_FPE_DIVBYZERO_S 19
+#define TXSTAT_FPE_OVERFLOW_BIT 0x00040000
+#define TXSTAT_FPE_OVERFLOW_S 18
+#define TXSTAT_FPE_UNDERFLOW_BIT 0x00020000
+#define TXSTAT_FPE_UNDERFLOW_S 17
+#define TXSTAT_FPE_INEXACT_BIT 0x00010000
+#define TXSTAT_FPE_INEXACT_S 16
+#define TXSTAT_BUSERR_BIT 0x00800000 /* Set if bus error/ack state */
+#define TXSTAT_BUSERR_S 23
+#define TXSTAT_BUSSTATE_BITS 0xFF000000 /* Read only */
+#define TXSTAT_BUSSTATE_S 24
+#define TXSTAT_KICKCNT_BITS 0xFFFF0000
+#define TXSTAT_KICKCNT_S 16
+#define TXMASK_REGNUM 1
+#define TXSTATI_REGNUM 2
+#define TXSTATI_BGNDHALT_BIT 0x00000004
+#define TXMASKI_REGNUM 3
+#define TXPOLL_REGNUM 4
+#define TXPOLLI_REGNUM 6
+
+/*
+ * TXDRCTRL register can be used to partition the DSP RAM space available to
+ * this thread at startup. This is achieved by offsetting the region allocated
+ * to each thread.
+ */
+#define TXDRCTRL_D1PARTOR_BITS 0x00000F00 /* OR's into top 4 bits */
+#define TXDRCTRL_D1PARTOR_S 8
+#define TXDRCTRL_D0PARTOR_BITS 0x0000000F /* OR's into top 4 bits */
+#define TXDRCTRL_D0PARTOR_S 0
+/* Given extracted Pow and Or fields this is threads base within DSP RAM */
+#define TXDRCTRL_DXBASE(Pow, Or) ((Or)<<((Pow)-4))
+
+/*****************************************************************************
+ * RUN TIME TRACE CONTROL REGISTERS
+ ****************************************************************************/
+/*
+ * The following values are only relevant to code that implements run-time
+ * trace features within the META Core
+ */
+#define TTEXEC TT.0
+#define TTCTRL TT.1
+#define TTMARK TT.2
+#define TTREC TT.3
+#define GTEXEC TT.4
+
+#define TTEXEC_REGNUM 0
+#define TTEXEC_EXTTRIGAND_BITS 0x7F000000
+#define TTEXEC_EXTTRIGAND_S 24
+#define TTEXEC_EXTTRIGEN_BIT 0x00008000
+#define TTEXEC_EXTTRIGMATCH_BITS 0x00007F00
+#define TTEXEC_EXTTRIGMATCH_S 8
+#define TTEXEC_TCMODE_BITS 0x00000003
+#define TTEXEC_TCMODE_S 0
+
+#define TTCTRL_REGNUM 1
+#define TTCTRL_TRACETT_BITS 0x00008000
+#define TTCTRL_TRACETT_S 15
+#define TTCTRL_TRACEALL_BITS 0x00002000
+#define TTCTRL_TRACEALL_S 13
+#ifdef METAC_2_1
+#define TTCTRL_TRACEALLTAG_BITS 0x00000400
+#define TTCTRL_TRACEALLTAG_S 10
+#endif /* METAC_2_1 */
+#define TTCTRL_TRACETAG_BITS 0x00000200
+#define TTCTRL_TRACETAG_S 9
+#define TTCTRL_TRACETTPC_BITS 0x00000080
+#define TTCTRL_TRACETTPC_S 7
+#define TTCTRL_TRACEMPC_BITS 0x00000020
+#define TTCTRL_TRACEMPC_S 5
+#define TTCTRL_TRACEEN_BITS 0x00000008
+#define TTCTRL_TRACEEN_S 3
+#define TTCTRL_TRACEEN1_BITS 0x00000004
+#define TTCTRL_TRACEEN1_S 2
+#define TTCTRL_TRACEPC_BITS 0x00000002
+#define TTCTRL_TRACEPC_S 1
+
+#ifdef METAC_2_1
+#define TTMARK_REGNUM 2
+#define TTMARK_BITS 0xFFFFFFFF
+#define TTMARK_S 0x0
+
+#define TTREC_REGNUM 3
+#define TTREC_BITS 0xFFFFFFFFFFFFFFFF
+#define TTREC_S 0x0
+#endif /* METAC_2_1 */
+
+#define GTEXEC_REGNUM 4
+#define GTEXEC_DCRUN_BITS 0x80000000
+#define GTEXEC_DCRUN_S 31
+#define GTEXEC_ICMODE_BITS 0x0C000000
+#define GTEXEC_ICMODE_S 26
+#define GTEXEC_TCMODE_BITS 0x03000000
+#define GTEXEC_TCMODE_S 24
+#define GTEXEC_PERF1CMODE_BITS 0x00040000
+#define GTEXEC_PERF1CMODE_S 18
+#define GTEXEC_PERF0CMODE_BITS 0x00010000
+#define GTEXEC_PERF0CMODE_S 16
+#define GTEXEC_REFMSEL_BITS 0x0000F000
+#define GTEXEC_REFMSEL_S 12
+#define GTEXEC_METRICTH_BITS 0x000003FF
+#define GTEXEC_METRICTH_S 0
+
+#ifdef METAC_2_1
+/*
+ * Clock Control registers
+ * -----------------------
+ */
+#define TXCLKCTRL_REGNUM 22
+
+/*
+ * Default setting is with clocks always on (DEFON), turning all clocks off
+ * can only be done from external devices (OFF), enabling automatic clock
+ * gating will allow clocks to stop as units fall idle.
+ */
+#define TXCLKCTRL_ALL_OFF 0x02222222
+#define TXCLKCTRL_ALL_DEFON 0x01111111
+#define TXCLKCTRL_ALL_AUTO 0x02222222
+
+/*
+ * Individual fields control caches, floating point and main data/addr units
+ */
+#define TXCLKCTRL_CLOCKIC_BITS 0x03000000
+#define TXCLKCTRL_CLOCKIC_S 24
+#define TXCLKCTRL_CLOCKDC_BITS 0x00300000
+#define TXCLKCTRL_CLOCKDC_S 20
+#define TXCLKCTRL_CLOCKFP_BITS 0x00030000
+#define TXCLKCTRL_CLOCKFP_S 16
+#define TXCLKCTRL_CLOCKD1_BITS 0x00003000
+#define TXCLKCTRL_CLOCKD1_S 12
+#define TXCLKCTRL_CLOCKD0_BITS 0x00000300
+#define TXCLKCTRL_CLOCKD0_S 8
+#define TXCLKCTRL_CLOCKA1_BITS 0x00000030
+#define TXCLKCTRL_CLOCKA1_S 4
+#define TXCLKCTRL_CLOCKA0_BITS 0x00000003
+#define TXCLKCTRL_CLOCKA0_S 0
+
+/*
+ * Individual settings for each field are common
+ */
+#define TXCLKCTRL_CLOCKxx_OFF 0
+#define TXCLKCTRL_CLOCKxx_DEFON 1
+#define TXCLKCTRL_CLOCKxx_AUTO 2
+
+#endif /* METAC_2_1 */
+
+#ifdef METAC_2_1
+/*
+ * Fast interrupt new bits
+ * ------------------------------------
+ */
+#define TXSTATUS_IPTOGGLE_BIT 0x80000000 /* Prev PToggle of TXPRIVEXT */
+#define TXSTATUS_ISTATE_BIT 0x40000000 /* IState bit */
+#define TXSTATUS_IWAIT_BIT 0x20000000 /* wait indefinitely in decision step*/
+#define TXSTATUS_IEXCEPT_BIT 0x10000000 /* Indicate an exception occured */
+#define TXSTATUS_IRPCOUNT_BITS 0x0E000000 /* Number of 'dirty' date entries*/
+#define TXSTATUS_IRPCOUNT_S 25
+#define TXSTATUS_IRQSTAT_BITS 0x0000F000 /* IRQEnc bits, trigger or interrupts */
+#define TXSTATUS_IRQSTAT_S 12
+#define TXSTATUS_LNKSETOK_BIT 0x00000020 /* LNKSetOK bit, successful LNKSET */
+
+/* New fields in TXDE for fast interrupt system */
+#define TXDIVTIME_IACTIVE_BIT 0x00008000 /* Enable new interrupt system */
+#define TXDIVTIME_INONEST_BIT 0x00004000 /* Gate nested interrupt */
+#define TXDIVTIME_IREGIDXGATE_BIT 0x00002000 /* gate of the IRegIdex field */
+#define TXDIVTIME_IREGIDX_BITS 0x00001E00 /* Index of A0.0/1 replaces */
+#define TXDIVTIME_IREGIDX_S 9
+#define TXDIVTIME_NOST_BIT 0x00000100 /* disable superthreading bit */
+#endif
+
+#endif /* _ASM_METAG_REGS_H_ */
--
1.7.7.6



\
 
 \ /
  Last update: 2012-12-05 18:22    [W:0.287 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site