lkml.org 
[lkml]   [2012]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 0/4] Add generic driver for on-chip SRAM
On Tue, Dec 04, 2012 at 09:53:38AM +0100, Philipp Zabel wrote:
> Hi,
>
> On Fri, 2012-11-23 at 15:24 +0100, Philipp Zabel wrote:
> > These patches add support to configure on-chip SRAM via device-tree
> > node or platform data and to obtain the resulting genalloc pool from
> > the physical address or a phandle pointing at the device tree node.
> > This allows drivers to allocate SRAM with the genalloc API without
> > hard-coding the genalloc pool pointer.
>
> are there any further comments on this series?
>
> > The on-chip SRAM on i.MX53 and i.MX6q can be registered via device tree
> > and changed to use the simple generic SRAM driver:
> >
> > ocram: ocram@00900000 {
> > compatible = "fsl,imx-ocram", "sram";
> > reg = <0x00900000 0x3f000>;
> > };
> >
> > A driver that needs to allocate SRAM buffers, like the video processing
> > unit on i.MX53, can retrieve the genalloc pool from a phandle in the
> > device tree using of_get_named_gen_pool(node, "iram", 0) from patch 1:
> >
> > vpu@63ff4000 {
> > /* ... */
> > iram = <&ocram>;
> > };
> >
> > The allocation granularity is hard-coded to 32 bytes for now,
> > until a way to configure it can be agreed upon. There is overhead
> > for bigger SRAMs, where only a much coarser allocation granularity
> > is needed: At 32 bytes minimum allocation size, a 256 KiB SRAM
> > needs a 1 KiB bitmap to track allocations.
> >
> > Once everybody is ok with it, could the first two patches be merged
> > through the char-misc tree? I'll resend the i.MX and coda patches to
> > the respective lists afterwards.
>
> Arnd, Greg, would you take the first patch "genalloc: add a global pool
> list, allow to find pools by phys address" into the char-misc tree if
> there are no vetoes? Or should I try and get it merged separately,
> first?

It's too late for anything new for 3.8, so how about resending this all
after 3.8-rc1 is out and we can take it from there?

thanks,

greg k-h


\
 
 \ /
  Last update: 2012-12-04 17:21    [W:0.078 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site