lkml.org 
[lkml]   [2012]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH 1/3] regulator: max8997: Use uV in voltage_map_desc
From
Date
Current code does integer division (min_vol = min_uV / 1000) before pass
min_vol to max8997_get_voltage_proper_val().
So it is possible min_vol is truncated to a smaller value.

For example, if the request min_uV is 800900 for ldo.
min_vol = 800900 / 1000 = 800 (mV)
Then max8997_get_voltage_proper_val returns 800 mV for this case which is lower
than the requested voltage.

Use uV rather than mV in voltage_map_desc to prevent truncation by integer
division.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/max8997.c | 36 +++++++++++++++++-------------------
1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index c30424a..1a1ae99 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -78,26 +78,26 @@ struct voltage_map_desc {
int step;
};

-/* Voltage maps in mV */
+/* Voltage maps in uV */
static const struct voltage_map_desc ldo_voltage_map_desc = {
- .min = 800, .max = 3950, .step = 50,
+ .min = 800000, .max = 3950000, .step = 50000,
}; /* LDO1 ~ 18, 21 all */

static const struct voltage_map_desc buck1245_voltage_map_desc = {
- .min = 650, .max = 2225, .step = 25,
+ .min = 650000, .max = 2225000, .step = 25000,
}; /* Buck1, 2, 4, 5 */

static const struct voltage_map_desc buck37_voltage_map_desc = {
- .min = 750, .max = 3900, .step = 50,
+ .min = 750000, .max = 3900000, .step = 50000,
}; /* Buck3, 7 */

-/* current map in mA */
+/* current map in uA */
static const struct voltage_map_desc charger_current_map_desc = {
- .min = 200, .max = 950, .step = 50,
+ .min = 200000, .max = 950000, .step = 50000,
};

static const struct voltage_map_desc topoff_current_map_desc = {
- .min = 50, .max = 200, .step = 10,
+ .min = 50000, .max = 200000, .step = 10000,
};

static const struct voltage_map_desc *reg_voltage_map[] = {
@@ -178,7 +178,7 @@ static int max8997_list_voltage(struct regulator_dev *rdev,
if (val > desc->max)
return -EINVAL;

- return val * 1000;
+ return val;
}

static int max8997_get_enable_register(struct regulator_dev *rdev,
@@ -469,7 +469,6 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,
{
struct max8997_data *max8997 = rdev_get_drvdata(rdev);
struct i2c_client *i2c = max8997->iodev->i2c;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;
const struct voltage_map_desc *desc;
int rid = rdev_get_id(rdev);
int i, reg, shift, mask, ret;
@@ -493,7 +492,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev,

desc = reg_voltage_map[rid];

- i = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ i = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (i < 0)
return i;

@@ -541,7 +540,7 @@ static int max8997_set_voltage_buck_time_sel(struct regulator_dev *rdev,
case MAX8997_BUCK4:
case MAX8997_BUCK5:
return DIV_ROUND_UP(desc->step * (new_selector - old_selector),
- max8997->ramp_delay);
+ max8997->ramp_delay * 1000);
}

return 0;
@@ -640,7 +639,6 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
const struct voltage_map_desc *desc;
int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg;
bool gpio_dvs_mode = false;
- int min_vol = min_uV / 1000, max_vol = max_uV / 1000;

if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7)
return -EINVAL;
@@ -665,7 +663,7 @@ static int max8997_set_voltage_buck(struct regulator_dev *rdev,
selector);

desc = reg_voltage_map[rid];
- new_val = max8997_get_voltage_proper_val(desc, min_vol, max_vol);
+ new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV);
if (new_val < 0)
return new_val;

@@ -1080,8 +1078,8 @@ static int max8997_pmic_probe(struct platform_device *pdev)
max8997->buck1_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck1_voltage[i] / 1000,
- pdata->buck1_voltage[i] / 1000 +
+ pdata->buck1_voltage[i],
+ pdata->buck1_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
@@ -1089,8 +1087,8 @@ static int max8997_pmic_probe(struct platform_device *pdev)
max8997->buck2_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck2_voltage[i] / 1000,
- pdata->buck2_voltage[i] / 1000 +
+ pdata->buck2_voltage[i],
+ pdata->buck2_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
@@ -1098,8 +1096,8 @@ static int max8997_pmic_probe(struct platform_device *pdev)
max8997->buck5_vol[i] = ret =
max8997_get_voltage_proper_val(
&buck1245_voltage_map_desc,
- pdata->buck5_voltage[i] / 1000,
- pdata->buck5_voltage[i] / 1000 +
+ pdata->buck5_voltage[i],
+ pdata->buck5_voltage[i] +
buck1245_voltage_map_desc.step);
if (ret < 0)
goto err_out;
--
1.7.9.5




\
 
 \ /
  Last update: 2012-12-28 10:41    [W:0.045 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site