Messages in this thread | | | Date | Wed, 19 Dec 2012 16:48:35 +0100 | From | Thierry Reding <> | Subject | Re: [PATCH v2] rtc-pcf8523: Add low battery voltage support |
| |
On Wed, Dec 19, 2012 at 04:34:32PM +0100, Jesper Nilsson wrote: > This patch implements reading of the battery voltage low signal for > rtc-pcf8523. > > The bit is read-only and cannot be cleared by software, so no > clear-function is implemented. > > Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> > --- > diff --git a/drivers/rtc/rtc-pcf8523.c b/drivers/rtc/rtc-pcf8523.c > index be05a64..62905fb 100644 > --- a/drivers/rtc/rtc-pcf8523.c > +++ b/drivers/rtc/rtc-pcf8523.c > @@ -23,6 +23,7 @@ > #define REG_CONTROL3_PM_VDD (1 << 6) /* switch-over disabled */ > #define REG_CONTROL3_PM_DSM (1 << 5) /* direct switching mode */ > #define REG_CONTROL3_PM_MASK 0xe0 > +#define REG_CONTROL3_BLF (1 << 2) /* battery low bit, read-only */ > > #define REG_SECONDS 0x03 > #define REG_SECONDS_OS (1 << 7) > @@ -250,9 +252,36 @@ static int pcf8523_rtc_set_time(struct device *dev, struct rtc_time *tm) > return pcf8523_start_rtc(client); > } > > +static int > +pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
You should keep the modifier and return type on the same line as the function name and wrap the arguments instead. That is:
static int pcf8523_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg) { ... }
> +{ > + struct i2c_client *client = to_i2c_client(dev); > + u8 value; > + int err; > + int ret = 0;
You can probably collapse the two integers in one line, like so:
int ret = 0, err;
Other than that, looks good:
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> [unhandled content-type:application/pgp-signature] | |