lkml.org 
[lkml]   [2012]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] OMAP2+: mux: Fixed gpio mux mode analysis.
* oleg.matcovschi@ti.com <oleg.matcovschi@ti.com> [121126 17:04]:
> From: Oleg Matcovschi <oleg.matcovschi@ti.com>
>
> OMAP_MODE_GPIO() macro verified only OMAP_MUX_MODE4.
> It is not correct for following platforms:
> 2430 - gpio mux mode 3
> 44xx - gpio mux mode 3
> 54xx - gpio mux mode 6
>
> Patch reserves first 3 bits in partition flags for storing gpio mux
> mode in same format as stored in control pad register.
> Modified OMAP_MODE_GPIO() macro to handle all possible cases of gpio mux mode.
> Modified omap_mux_init() flags of omap34xx to include OMAP_MUX_GPIO_IN_MODE4.

Thanks applying into omap-for-v3.8/fixes-for-merge-window.

Regards,

Tony

> Signed-off-by: Oleg Matcovschi <oleg.matcovschi@ti.com>
> ---
> arch/arm/mach-omap2/mux.c | 10 ++++------
> arch/arm/mach-omap2/mux.h | 20 +++++++++++++++-----
> arch/arm/mach-omap2/mux34xx.c | 2 +-
> 3 files changed, 20 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
> index 701e17c..1fa39dc 100644
> --- a/arch/arm/mach-omap2/mux.c
> +++ b/arch/arm/mach-omap2/mux.c
> @@ -134,10 +134,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
>
> old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
> mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
> - if (partition->flags & OMAP_MUX_GPIO_IN_MODE3)
> - mux_mode |= OMAP_MUX_MODE3;
> - else
> - mux_mode |= OMAP_MUX_MODE4;
> + mux_mode |= partition->gpio;
> pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
> gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
> omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
> @@ -799,7 +796,7 @@ int __init omap_mux_late_init(void)
> struct omap_mux *m = &e->mux;
> u16 mode = omap_mux_read(partition, m->reg_offset);
>
> - if (OMAP_MODE_GPIO(mode))
> + if (OMAP_MODE_GPIO(partition, mode))
> continue;
>
> #ifndef CONFIG_DEBUG_FS
> @@ -1064,7 +1061,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition,
> }
> #else
> /* Skip pins that are not muxed as GPIO by bootloader */
> - if (!OMAP_MODE_GPIO(omap_mux_read(partition,
> + if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition,
> superset->reg_offset))) {
> superset++;
> continue;
> @@ -1131,6 +1128,7 @@ int __init omap_mux_init(const char *name, u32 flags,
>
> partition->name = name;
> partition->flags = flags;
> + partition->gpio = flags & OMAP_MUX_MODE7;
> partition->size = mux_size;
> partition->phys = mux_pbase;
> partition->base = ioremap(mux_pbase, mux_size);
> diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
> index 76f9b3c..5504e12 100644
> --- a/arch/arm/mach-omap2/mux.h
> +++ b/arch/arm/mach-omap2/mux.h
> @@ -58,7 +58,8 @@
> #define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN)
> #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
>
> -#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
> +#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \
> + partition->gpio)
> #define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
>
> /* Flags for omapX_mux_init */
> @@ -79,13 +80,20 @@
> /*
> * omap_mux_init flags definition:
> *
> + * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control
> + * register which includes values from 0-7.
> * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
> * The default value is 16 bits.
> - * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
> - * The default is mode4.
> */
> -#define OMAP_MUX_REG_8BIT (1 << 0)
> -#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1)
> +#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0
> +#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1
> +#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2
> +#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3
> +#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4
> +#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5
> +#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6
> +#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7
> +#define OMAP_MUX_REG_8BIT (1 << 3)
>
> /**
> * struct omap_board_data - board specific device data
> @@ -105,6 +113,7 @@ struct omap_board_data {
> * struct mux_partition - contain partition related information
> * @name: name of the current partition
> * @flags: flags specific to this partition
> + * @gpio: gpio mux mode
> * @phys: physical address
> * @size: partition size
> * @base: virtual address after ioremap
> @@ -114,6 +123,7 @@ struct omap_board_data {
> struct omap_mux_partition {
> const char *name;
> u32 flags;
> + u32 gpio;
> u32 phys;
> u32 size;
> void __iomem *base;
> diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
> index c47140b..c53609f4 100644
> --- a/arch/arm/mach-omap2/mux34xx.c
> +++ b/arch/arm/mach-omap2/mux34xx.c
> @@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
> return -EINVAL;
> }
>
> - return omap_mux_init("core", 0,
> + return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4,
> OMAP3_CONTROL_PADCONF_MUX_PBASE,
> OMAP3_CONTROL_PADCONF_MUX_SIZE,
> omap3_muxmodes, package_subset, board_subset,
> --
> 1.7.4.1
>


\
 
 \ /
  Last update: 2012-12-14 19:41    [W:0.069 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site