lkml.org 
[lkml]   [2012]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: linux-next: manual merge of the l2-mtd tree with Linus' tree
Date
On Thu, Dec 13, 2012 at 07:07:55, Stephen Rothwell wrote:
> Hi Artem,
>
> Today's linux-next merge of the l2-mtd tree got a conflict in
> Documentation/devicetree/bindings/arm/davinci/nand.txt between commit
> fed16bba8726 ("mtd: nand: davinci: fix the binding documentation") from
> Linus' tree and commit 192afdbfbc5c ("mtd: davinci: add support for
> parition binding nodes") from the l2-mtd tree.
>
> I fixed it up (maybe- see below) and can carry the fix as necessary (no
> action is required).
>
> --
> Cheers,
> Stephen Rothwell sfr@canb.auug.org.au
>
> diff --cc Documentation/devicetree/bindings/arm/davinci/nand.txt
> index 49fc7ad,4746452..0000000
> --- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
> +++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt
> @@@ -23,16 -23,37 +23,24 @@@ Recommended properties
> - ti,davinci-nand-buswidth: buswidth 8 or 16
> - ti,davinci-nand-use-bbt: use flash based bad block table support.
>
> + nand device bindings may contain additional sub-nodes describing
> + partitions of the address space. See partition.txt for more detail.
> +
> -Example (enbw_cmc board):
> -aemif@60000000 {
> - compatible = "ti,davinci-aemif";
> - #address-cells = <2>;
> - #size-cells = <1>;
> - reg = <0x68000000 0x80000>;
> - ranges = <2 0 0x60000000 0x02000000
> - 3 0 0x62000000 0x02000000
> - 4 0 0x64000000 0x02000000
> - 5 0 0x66000000 0x02000000
> - 6 0 0x68000000 0x02000000>;
> - nand@3,0 {
> - compatible = "ti,davinci-nand";
> - reg = <3 0x0 0x807ff
> - 6 0x0 0x8000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ti,davinci-chipselect = <1>;
> - ti,davinci-mask-ale = <0>;
> - ti,davinci-mask-cle = <0>;
> - ti,davinci-mask-chipsel = <0>;
> - ti,davinci-ecc-mode = "hw";
> - ti,davinci-ecc-bits = <4>;
> - ti,davinci-nand-use-bbt;
> +Example(da850 EVM ):
> +nand_cs3@62000000 {
> + compatible = "ti,davinci-nand";
> + reg = <0x62000000 0x807ff
> + 0x68000000 0x8000>;
> + ti,davinci-chipselect = <1>;
> + ti,davinci-mask-ale = <0>;
> + ti,davinci-mask-cle = <0>;
> + ti,davinci-mask-chipsel = <0>;
> + ti,davinci-ecc-mode = "hw";
> + ti,davinci-ecc-bits = <4>;
> + ti,davinci-nand-use-bbt;
> +
> - partition@180000 {
> - label = "ubifs";
> - reg = <0x180000 0x7e80000>;
> - };
> ++ partition@180000 {
> ++ label = "ubifs";
> ++ reg = <0x180000 0x7e80000>;

partition@180000 is sub-node of nand_cs3@62000000.
nand_cs3@62000000 needs to use below properties

#address-cells = <1>;
#size-cells = <1>;

Without these properties DT build will give reg format Warning.

> + };
> };
>



\
 
 \ /
  Last update: 2012-12-13 07:01    [W:0.068 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site