lkml.org 
[lkml]   [2012]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: Supermicro X9SRL-F - channel enumeration error & ACPI/firmware bug question
Date


-----Original Message-----
From: Bjorn Helgaas [mailto:bhelgaas@google.com]
Sent: Monday, November 26, 2012 8:12 PM
To: Justin Piszcz
Cc: Bruno Prémont; support@supermicro.com; linux-kernel@vger.kernel.org; Dan
Williams
Subject: Re: Supermicro X9SRL-F - channel enumeration error & ACPI/firmware
bug question

On Mon, Nov 26, 2012 at 6:00 PM, Justin Piszcz <jpiszcz@lucidpixels.com>
wrote:
>
>
> -----Original Message-----
> From: Bjorn Helgaas [mailto:bhelgaas@google.com]
> Sent: Monday, November 26, 2012 8:00 PM
> To: Bruno Prémont
> Cc: Justin Piszcz; support@supermicro.com; linux-kernel@vger.kernel.org;
Dan
> Williams
> Subject: Re: Supermicro X9SRL-F - channel enumeration error &
ACPI/firmware
> bug question
>
> [Try Dan's current email address; sorry Dan]
>
> On Mon, Nov 26, 2012 at 5:56 PM, Bjorn Helgaas <bhelgaas@google.com>
wrote:
>> [+cc Dan]
>>
>> On Mon, Nov 26, 2012 at 2:42 PM, Bruno Prémont
>> <bonbons@linux-vserver.org> wrote:
>>> Hi Justin,
>>>
>>> On Sat, 24 November 2012 "Justin Piszcz" wrote:
>>>> Is the following normal on an X9SRL-F board (bios 1.0a)?
>>>>
>>>> In the manual it states:
>>>>
>>>> Data Direct I/O
>>>> Select Enabled to enable Intel I/OAT (I/O Acceleration Technology),
> which
>>>> significantly reduces CPU overhead by leveraging CPU architectural
>>>> improvements and freeing the system resource for other tasks. The>
> Here is the full dmesg: (I went back to my older kernel, let me know if
you
> need a dmesg w/ those options enabled)
> http://home.comcast.net/~jpiszcz/20121126/dmesg.txt

It looks like maybe you don't have CONFIG_PCI_MMCONFIG turned on?

Hi,

I have two supermicro boards I am trying this on, I tried this on another
system I have (X8DTH-6F), with all of these options enabled, the system does
not boot. It cannot talk to the SATA boot drive.

" 5520 chips built in, the X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF offers ......
The Intel I/OAT (I/O Acceleration Technology) significantly reduces CPU
over- head by ..."

When the following options are enabled, the system does not boot:

+CONFIG_HAVE_INTEL_TXT=y
+CONFIG_IOMMU_API=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DMAR_TABLE=y
+CONFIG_INTEL_IOMMU=y
+CONFIG_INTEL_IOMMU_DEFAULT_ON=y
+CONFIG_INTEL_IOMMU_FLOPPY_WA=y

It fails like so:

(Fails to talk to the SSD)
http://home.comcast.net/~jpiszcz/20121127/photo1-resize.jpg

(then, a few moments later: Kernel panic)
http://home.comcast.net/~jpiszcz/20121127/photo2-resize.jpg

With those options disabled, the system boots (and always has booted fine).
Is there a certain combination of parameters that allows I/OAT to be enabled
_and_ allow the system to boot?

Justin.




--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-11-27 15:21    [W:0.073 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site