lkml.org 
[lkml]   [2012]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] regulator: tps65090: add external control support for DCDC
On Tue, Oct 09, 2012 at 11:51:19AM +0530, Laxman Dewangan wrote:
> On Tuesday 09 October 2012 11:58 AM, Mark Brown wrote:

> >There's support for GPIO driven enable lines in the framework already,
> >this driver should be able to use this happily, this sort of hardware is
> >exactly the use case it was written for.

> yes, I am using the gpio driven enable lines in the framework.
> This patch does the some configuration in register to enable external
> control and configure the regulator_config (fill gpio related stuff
> in config) before registering
> the regulator. There is no call of gpio libs from the driver.

The code seemed way more complex than that... did you notice the fact
that if a GPIO is specified then the register enable/disable control
will be ignored if provided?


\
 
 \ /
  Last update: 2012-10-09 09:21    [W:0.081 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site