lkml.org 
[lkml]   [2012]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: x86: Regression in 3.6.4, bisected to "Exclude E820_RESERVED regions..."
Am 29.10.2012 11:22, schrieb Alexander Holler:
> Hello,
>
> I've just bisected a problem with 3.6.4.
>
> I had to revert commit 54ce8ce298f382a06186cb4672ad6aa090b050b6
> (1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a in mainline), otherwise my box
> didn't boot.
>
> I can't provide any output, because I don't see if that commit is
> applied. ;)

That sentence missed an 'any'. But I've now attached a serial, here is
the output:

------
early console in decompress_kernel

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.4 (root@krabat.ahsoftware) (gcc version
4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #265 SMP Mon Oct 29 14:07:32
CET 2012
[ 0.000000] Command line: ro root=/dev/sdb2 rootfstype=ext4
enforcing=0 cgroup_disable=memory vga=0x346 video=vesafb:mtrr:3,ywrap
radeon.modeset=0 earlycon=uart8250,io,0x3f8,115200n8
earlyprintk=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d7cafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d7cb000-0x000000009dd6afff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dd6b000-0x000000009dd7afff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009dd7b000-0x000000009e0e6fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e0e7000-0x000000009e669fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e66a000-0x000000009e66afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e66b000-0x000000009e870fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e871000-0x000000009ec8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ec90000-0x000000009eff3fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff4000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x00000001beffffff] usable
[ 0.000000] Early serial console at I/O port 0x3f8 (options '115200n8')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.4 (root@krabat.ahsoftware) (gcc version
4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #265 SMP Mon Oct 29 14:07:32
CET 2012
[ 0.000000] Command line: ro root=/dev/sdb2 rootfstype=ext4
enforcing=0 cgroup_disable=memory vga=0x346 video=vesafb:mtrr:3,ywrap
radeon.modeset=0 earlycon=uart8250,io,0x3f8,115200n8
earlyprintk=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d7cafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d7cb000-0x000000009dd6afff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dd6b000-0x000000009dd7afff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009dd7b000-0x000000009e0e6fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e0e7000-0x000000009e669fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e66a000-0x000000009e66afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e66b000-0x000000009e870fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e871000-0x000000009ec8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ec90000-0x000000009eff3fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff4000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x00000001beffffff] usable
[ 0.000000] Early serial console at I/O port 0x3f8 (options '115200n8')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI 2.7 present.
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1bf000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0x1bf000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9effffff]
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x9effffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1beffffff]
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1beffffff]
[ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory
[ 0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.6.4 #265
[ 0.000000] Pid: 0, comm: swapper Not tainted 3.6.4 #265
[ 0.000000] Call Trace:
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff813e2a76>] ? panic+0xbf/0x1bb
[ 0.000000] [<ffffffff813e2a76>] ? panic+0xbf/0x1bb
[ 0.000000] [<ffffffff813cfa3f>] ? alloc_low_page+0x54/0x7f
[ 0.000000] [<ffffffff813cfa3f>] ? alloc_low_page+0x54/0x7f
[ 0.000000] [<ffffffff8169c987>] ? phys_pud_init+0x1a9/0x25a
[ 0.000000] [<ffffffff8169c987>] ? phys_pud_init+0x1a9/0x25a
[ 0.000000] [<ffffffff8169caf7>] ?
kernel_physical_mapping_init+0xbf/0x17f
[ 0.000000] [<ffffffff8169caf7>] ?
kernel_physical_mapping_init+0xbf/0x17f
[ 0.000000] [<ffffffff813cf6de>] ? init_memory_mapping+0x2de/0x5b0
[ 0.000000] [<ffffffff813cf6de>] ? init_memory_mapping+0x2de/0x5b0
[ 0.000000] [<ffffffff81671da2>] ? setup_arch+0x672/0x8b0
[ 0.000000] [<ffffffff81671da2>] ? setup_arch+0x672/0x8b0
[ 0.000000] [<ffffffff81670815>] ? start_kernel+0x86/0x2ef
[ 0.000000] [<ffffffff81670815>] ? start_kernel+0x86/0x2ef
------

Don't ask me, why some lines are twice there. I assume it's because I
have earlycon and earlyprintk enabled in the command line. I've never
used the serial before to debug a kernel on x86, I just have experience
debugging ARMs using the serial. ;)


Regards,

Alexander


\
 
 \ /
  Last update: 2012-10-29 15:01    [W:0.317 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site