lkml.org 
[lkml]   [2012]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/3] PWM: vt8500: Update vt8500 PWM driver support
From
Date
On Mon, 2012-10-22 at 09:24 +0200, Thierry Reding wrote:
> On Mon, Oct 22, 2012 at 08:09:07PM +1300, Tony Prisk wrote:
> > On Mon, 2012-10-22 at 19:51 +1300, Tony Prisk wrote:
> > > >
> > > > > chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
> > > > > if (chip == NULL) {
> > > > > dev_err(&pdev->dev, "failed to allocate memory\n");
> > > > > @@ -123,26 +144,32 @@ static int __devinit pwm_probe(struct platform_device *pdev)
> > > > > chip->chip.ops = &vt8500_pwm_ops;
> > > > > chip->chip.base = -1;
> > > > > chip->chip.npwm = VT8500_NR_PWMS;
> > > > > + chip->clk = of_clk_get(np, 0);
> > > >
> > > > I thought this was supposed to work transparently across OF and !OF
> > > > configurations by using just clk_get() or devm_clk_get()? I guess that
> > > > if the driver depends on OF, then this would be moot, but we should
> > > > probably stick to the standard usage anyway.
> > > >
> > > > Furthermore, of_clk_get() doesn't seem to be managed, so you'd need to
> > > > add explicit clk_put() in the error cleanup paths. One more argument in
> > > > favour of using devm_clk_get() instead.
> > >
> > > Hmm good point. I stuck with of_ functions because its an OF only driver
> > > and it seemed 'backward' to mix old code with new. It does pose the
> > > question of 'why have of_clk_get() if existing functions work better'.
> >
> > Was about to fix this but noticed why it wasn't like this to start
> > with :)
> >
> > struct clk *devm_clk_get(struct device *dev, const char *id);
> > struct clk *of_clk_get(struct device_node *np, int index);
> >
> > devm_clk_get requires me to 'get' the clock by name. arch-vt8500 (and I
> > believe a lot of other arch's) don't enforce names for clocks defined in
> > devicetree, therefore there is no way for me to know what name the clk
> > has unless I include in the binding that the clock must be named 'xxx'.
>
> I thought clk_get() was supposed to return the first clock specified in
> DT if you pass NULL as the consumer name. I haven't tested this though.
> And I haven't looked at the code.
>
> > of_clk_get retrieves it by the dt-node + index, so it doesn't care as
> > long as its the 1st clock listed.
>
> So the usual way to do this, I believe, is:
>
> clocks = <&clk_foo>;
> clock-names = "foo";
>
> Then use:
>
> clk = devm_clk_get(&pdev->dev, "foo");
>
> And as I said above, I was under the impression that the default would
> be to use the first clock if NULL was specified instead of "foo".
>
> Thierry

clock-names is an optional property (as defined in
bindings/clock/clock-bindings.txt) so relying on it is .. well,
unreliable.

What you say makes sense, but it means the binding document has to make
an optional property into a required property simply to use an 'old'
function when a new function would 'work' (granted not as well, as you
pointed out) without requiring the optional property.

Your subsystem - your rules. Let me know if I've managed to sway you or
not :)

Regards
Tony P



\
 
 \ /
  Last update: 2012-10-22 10:21    [W:0.062 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site