lkml.org 
[lkml]   [2012]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCHv5 03/11] modem_shm: Configuration for SHM Channel an devices.
Date
Add structures for modem shared memory device. Each channel
is represented as a device with data structures holding the
channel configuration and read/write indexes for the ring-buffer.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
---
include/linux/modem_shm/shm_dev.h | 245 +++++++++++++++++++++++++++++++++++++
1 files changed, 245 insertions(+), 0 deletions(-)
create mode 100644 include/linux/modem_shm/shm_dev.h

diff --git a/include/linux/modem_shm/shm_dev.h b/include/linux/modem_shm/shm_dev.h
new file mode 100644
index 0000000..a90676f
--- /dev/null
+++ b/include/linux/modem_shm/shm_dev.h
@@ -0,0 +1,245 @@
+/*
+ * Copyright (C) ST-Ericsson AB 2012
+ * Author: Sjur Brændeland / sjur.brandeland@stericsson.com
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef SHM_DEV_H_
+#define SHM_DEV_H_
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+
+#define SHM_NAMESZ 16
+#define SHM_MAX_CHANNELS 7
+#define SHM_PACKET_MODE 0x1
+#define SHM_STREAM_MODE 0x2
+#define SHM_LOOP_MODE 0x4
+#define SHM_PAIR_MODE 0x8
+#define SHM_MODE_MASK 0x3
+
+/**
+ * struct shm_udchannel - Unidirectional channel for shm driver.
+ *
+ * @addr: Base address of the channel, address must be
+ * a kernel logical address.
+ * @buffers: The number of buffers in the channel.
+ * @ch_size: The size of data area for the channel in one direction.
+ * @xfer_bit: GENI/O bit used when sending data (write pointer move)
+ * @xfer_done_bit: GENI/O bit used to indicate avilable buffers
+ * (read pointer move).
+ * @alignment: Alignment used in payload protocol.
+ * @mtu: Maxium Transfer Unit used for packet in a buffer (Packet mode).
+ * @packets: Maxium number of packets in a buffer (Packet mode).
+ * @state: State of the device 0 - Closed, 1 - Open
+ * @read: Specify the read index for a channel. In packed mode
+ * this index will at any time refer to the next buffer available for read.
+ * In stream mode, this will be the read index in the ring-buffer.
+ * @write: Specify the write index for a channel. In packed mode
+ * this index will at any time refer to the next buffer available for
+ * write. In stream mode, this will be the write index in the ring-buffer.
+ * @buf_size: In packet mode, this array contains the size of each buffer.
+ * In stream mode this is unused.
+ *
+ * This external shared memory channel configuration is exported from the
+ * shm device. It gives the shm driver the necessary information for
+ * running the shared memory protocol between modem and host.
+ *
+ * Note that two instances of this configuration is needed in order to run a
+ * bi-directional channel.
+ */
+struct shm_udchannel {
+ void *addr;
+ u32 buffers;
+ u32 ch_size;
+ u8 xfer_done_bit;
+ u8 xfer_bit;
+ u32 mtu;
+ u32 alignment;
+ u32 packets;
+ __le32 *state;
+ __le32 *read;
+ __le32 *write;
+ __le32 *buf_size;
+/* private: */
+ struct kobject kobj; /* kobj must be located at the end */
+};
+
+/**
+ * struct shm_channel - Channel definition for shm driver.
+ * @rx: Configuration for RX channel
+ * @tx: Configuration for TX channel
+ * @excl_group: Only channels with the same group ID can be open simultaneously.
+ * @mode: Configuring type of channel PACKET(1), STREAM(2)
+ * @name: Name of interface.
+ * @priority: Priority of the channel.
+ * @latency: Latency of the channel.
+ */
+struct shm_channel {
+ struct shm_udchannel rx, tx;
+ u32 excl_group;
+ u32 mode;
+ char name[SHM_NAMESZ];
+ u32 priority;
+ u32 latency;
+};
+
+#define SHM_OPEN 1
+#define SHM_CLOSED 0
+
+enum shm_dev_state {
+ SHM_DEV_CLOSED = 0,
+ SHM_DEV_OPENING,
+ SHM_DEV_OPEN,
+ SHM_DEV_ACTIVE,
+};
+
+/**
+ * struct shm_dev - Device definition for shm device.
+ *
+ * @dev: Reference to device
+ * @cfg: Configuration for the Channel
+ * @state: State of the device: Closed - No user space client is using it,
+ * Open - Open but no payload queued, Active - Payload queued on device.
+ *
+ * @open: The driver calls open() when channel is taken into use.
+ * This function will fail if channel configuration is inconsistent,
+ * or upon resource conflicts with other channels.
+ *
+ * @open_cb: The device calls open_cb() when is ready for use.
+ *
+ * @close: Called by the driver when a channel is no longer in use.
+ *
+ * @close_cb: The device calls close_cb() to notify about remote side closure.
+ *
+ * @ipc_tx_release_cb: This callback is triggered by the modem when a
+ * transmit operation has completed and the buffer can be reused.
+ * This function must be set by the driver upon device registration.
+ * The "more" flag is set if ipc_rx_cb() call is coming immediately
+ * after this call to ipc_tx_release_cb().
+ *
+ * @ipc_rx_cb: The driver gets this callback when the modem sends a buffer
+ * from the modem. The driver must call ipc_rx_release()
+ * to make the buffer available again when the received buffer has been
+ * processed.
+ * This function pointer must be set by the driver upon device
+ * registration.
+ *
+ * @ipc_rx_release: Called by the driver when a RX operation has completed
+ * and that the rx-buffer is released.
+ *
+ * @ipc_tx: Called by the driver when a TX buffer shall be sent to the modem.
+ *
+ * @driver_data: pointer to driver specific data.
+ *
+ * When communicating between two systems (e.g. modem and host),
+ * external shared memory can bused (e.g. C2C or DPRAM).
+ *
+ * This structure is used by the shm device representing the
+ * External Shared Memory.
+ *
+ * The this structure contains configuration data for the shm device and
+ * functions pointers for IPC communication between Linux host and modem.
+ * The external shared memory protocol memory e.g. C2C or DPRAM
+ * together is a IPC mechanism for transporting small commands such as
+ * Mailbox or GENI/O.
+ *
+ * This data structure is initiated by the shm device, except
+ * for the functions ipc_rx_cb() and ipc_tx_release_cb(). They must be set by
+ * the shm-driver when device is registering.
+ */
+
+struct shm_dev {
+ struct device dev;
+ struct shm_channel cfg;
+ enum shm_dev_state state;
+ int (*open)(struct shm_dev *dev);
+ void (*close)(struct shm_dev *dev);
+ int (*ipc_rx_release)(struct shm_dev *dev, bool more);
+ int (*ipc_tx)(struct shm_dev *dev);
+ int (*open_cb)(void *drv);
+ void (*close_cb)(void *drv);
+ int (*ipc_rx_cb)(void *drv);
+ int (*ipc_tx_release_cb)(void *drv);
+ void *driver_data;
+ /* private: */
+ struct list_head node;
+ void *priv;
+};
+
+/**
+ * shm_driver - operations for a shm I/O driver
+ * @driver: underlying device driver (populate name and owner).
+ * @mode: Type of channel for driver: PACKET(1), STREAM(2)
+ * @probe: the function to call when a device is found. Returns 0 or -errno.
+ * @remove: the function when a device is removed.
+ */
+struct shm_driver {
+ struct device_driver driver;
+ u32 mode;
+ int (*probe)(struct shm_dev *dev);
+ void (*remove)(struct shm_dev *dev);
+};
+
+/**
+ * modem_shm_register_driver() - Register an shm driver.
+ * @driver: SHM driver instance
+ */
+int modem_shm_register_driver(struct shm_driver *driver);
+
+/**
+ * modem_shm_unregister_driver() - Unregister an shm driver.
+ * @driver: SHM driver instance
+ */
+void modem_shm_unregister_driver(struct shm_driver *driver);
+
+/**
+ * modem_shm_register_device() - Register an shm device.
+ * @dev: SHM device instance
+ */
+int modem_shm_register_device(struct shm_dev *dev);
+
+/**
+ * modem_shm_unregister_device() - Unregister an shm device.
+ * @dev: SHM device instance
+ */
+void modem_shm_unregister_device(struct shm_dev *dev);
+
+/**
+ * modem_shm_foreach_dev - device iterator.
+ * @data: data for the callback.
+ * @fn: function to be called for each device.
+ *
+ * Iterate over shm bus's list of devices, and call @fn for each,
+ * passing it @data.
+ */
+void modem_shm_foreach_dev(void fn(struct shm_dev*, void *data), void *data);
+
+/**
+ * modem_shm_register_devices() - Register an array of shm devices.
+ * @devs: SHM devices to register
+ * @devices: Number of devices in array
+ */
+int modem_shm_register_devices(struct shm_channel *channel[], int channels);
+
+/**
+ * modem_shm_reset() - SHM unregister and remove all SHM devices
+ */
+void modem_shm_reset(void);
+
+/**
+ * genio_ipc_ready_cb() - Callback for CAIF_READY notification.
+ */
+void genio_ipc_ready_cb(void);
+
+/**
+ * modem_shm_request_firmware() - Request firmware from user-space.
+ * @context: Context returned in cb() function.
+ * @img_name: Name of the firmware image to load.
+ * @fw_avilable: Callback function called when firmware is avilable.
+ */
+int modem_shm_request_firmware(void *context, struct module *mod,
+ const char *img_name,
+ void (*fw_avilable)(const struct firmware *fw, void *ctx));
+
+#endif
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2012-01-31 09:51    [W:0.204 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site