lkml.org 
[lkml]   [2012]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v3 6/6] leds-lm3530: set the max_brightness to 127
Only 7 bits are used for the brightness. (register address : A0h)
So the max_brightness property of lm3530 should be set to 127.

On initializing registers, maximum initial brightness is limited to 'max_brightness'.

Division-by-two is removed on updating the value of brightness.
This arithmetic is not necessary because the range of brightness is 0 ~ 127.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
drivers/leds/leds-lm3530.c | 11 +++++++++--
1 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 3bb3c09..c669ebc 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -80,6 +80,9 @@
#define LM3530_DEF_ZT_3 (0x66)
#define LM3530_DEF_ZT_4 (0x7F)

+/* 7 bits are used for the brightness : LM3530_BRT_CTRL_REG */
+#define MAX_BRIGHTNESS (127)
+
struct lm3530_mode_map {
const char *mode;
enum lm3530_mode mode_val;
@@ -184,6 +187,9 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
else
brightness = drvdata->brightness = pdata->brt_val;

+ if (brightness > drvdata->led_dev.max_brightness)
+ brightness = drvdata->led_dev.max_brightness;
+
reg_val[0] = gen_config; /* LM3530_GEN_CONFIG */
reg_val[1] = als_config; /* LM3530_ALS_CONFIG */
reg_val[2] = brt_ramp; /* LM3530_BRT_RAMP_RATE */
@@ -249,12 +255,12 @@ static void lm3530_brightness_set(struct led_classdev *led_cdev,

/* set the brightness in brightness control register*/
err = i2c_smbus_write_byte_data(drvdata->client,
- LM3530_BRT_CTRL_REG, brt_val / 2);
+ LM3530_BRT_CTRL_REG, brt_val);
if (err)
dev_err(&drvdata->client->dev,
"Unable to set brightness: %d\n", err);
else
- drvdata->brightness = brt_val / 2;
+ drvdata->brightness = brt_val;

if (brt_val == 0) {
err = regulator_disable(drvdata->regulator);
@@ -353,6 +359,7 @@ static int __devinit lm3530_probe(struct i2c_client *client,
drvdata->enable = false;
drvdata->led_dev.name = pdata->name ? pdata->name : LM3530_LED_DEV;
drvdata->led_dev.brightness_set = lm3530_brightness_set;
+ drvdata->led_dev.max_brightness = MAX_BRIGHTNESS;

i2c_set_clientdata(client, drvdata);

--
1.7.4.1

Best Regards,
Milo (Woogyom) Kim
Texas Instruments Incorporated






\
 
 \ /
  Last update: 2012-01-31 08:37    [W:0.026 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site