lkml.org 
[lkml]   [2012]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH] x86/mce: Replace hard coded hex constants with symbolic defines
Magic constants like 0x0134 in code just invite questions on
where they come from, what they mean, can they be changed?

Provide #defines for the architecturally defined MCACOD values
with a reference to the Intel Software Developers manual which
describes them.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---

Ingo: You said "ok up to 100 cols or so" ... this goes to 103.
If this is OK, you can either apply it from here on top of the
x86/mce branch in tip - or I can push it to the ras tree and
send you another pull.

arch/x86/kernel/cpu/mcheck/mce-severity.c | 14 ++++++++++----
1 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce-severity.c b/arch/x86/kernel/cpu/mcheck/mce-severity.c
index f6c92f9..0c82091 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-severity.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-severity.c
@@ -56,6 +56,12 @@ static struct severity {
#define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
#define MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV)
#define MCACOD 0xffff
+/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
+#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
+#define MCACOD_SCRUBMSK 0xfff0
+#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
+#define MCACOD_DATA 0x0134 /* Data Load */
+#define MCACOD_INSTR 0x0150 /* Instruction Fetch */

MCESEV(
NO, "Invalid",
@@ -112,12 +118,12 @@ static struct severity {
#ifdef CONFIG_MEMORY_FAILURE
MCESEV(
KEEP, "HT thread notices Action required: data load error",
- SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|0x0134),
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
MCGMASK(MCG_STATUS_EIPV, 0)
),
MCESEV(
AR, "Action required: data load error",
- SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|0x0134),
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
USER
),
#endif
@@ -129,11 +135,11 @@ static struct severity {
/* known AO MCACODs: */
MCESEV(
AO, "Action optional: memory scrubbing error",
- SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|0xfff0, MCI_UC_S|0x00c0)
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCACOD_SCRUBMSK, MCI_UC_S|MCACOD_SCRUB)
),
MCESEV(
AO, "Action optional: last level cache writeback error",
- SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCACOD, MCI_UC_S|0x017a)
+ SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCACOD, MCI_UC_S|MCACOD_L3WB)
),
MCESEV(
SOME, "Action optional: unknown MCACOD",
--
1.7.9.rc2.1.g69204


\
 
 \ /
  Last update: 2012-01-27 01:23    [W:0.047 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site