lkml.org 
[lkml]   [2012]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] block: xsysace: Don't use NO_IRQ
On Wed, Dec 21, 2011 at 03:32:09PM +0100, Michal Simek wrote:
> Drivers shouldn't use NO_IRQ. Microblaze and PPC
> define NO_IRQ as 0 and this reference will be removed
> in near future.
>
> Signed-off-by: Michal Simek <monstr@monstr.eu>
> CC: Grant Likely <grant.likely@secretlab.ca>
> CC: Rob Herring <rob.herring@calxeda.com>
> CC: Ryan Mallon <rmallon@gmail.com>

Acked-by: Grant Likely <grant.likely@secretlab.ca>

> ---
> drivers/block/xsysace.c | 10 +++++-----
> 1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
> index fb1975d..1a17e33 100644
> --- a/drivers/block/xsysace.c
> +++ b/drivers/block/xsysace.c
> @@ -456,7 +456,7 @@ static inline void ace_fsm_yieldirq(struct ace_device *ace)
> {
> dev_dbg(ace->dev, "ace_fsm_yieldirq()\n");
>
> - if (ace->irq == NO_IRQ)
> + if (!ace->irq)
> /* No IRQ assigned, so need to poll */
> tasklet_schedule(&ace->fsm_tasklet);
> ace->fsm_continue_flag = 0;
> @@ -1034,12 +1034,12 @@ static int __devinit ace_setup(struct ace_device *ace)
> ACE_CTRL_DATABUFRDYIRQ | ACE_CTRL_ERRORIRQ);
>
> /* Now we can hook up the irq handler */
> - if (ace->irq != NO_IRQ) {
> + if (ace->irq) {
> rc = request_irq(ace->irq, ace_interrupt, 0, "systemace", ace);
> if (rc) {
> /* Failure - fall back to polled mode */
> dev_err(ace->dev, "request_irq failed\n");
> - ace->irq = NO_IRQ;
> + ace->irq = 0;
> }
> }
>
> @@ -1086,7 +1086,7 @@ static void __devexit ace_teardown(struct ace_device *ace)
>
> tasklet_kill(&ace->fsm_tasklet);
>
> - if (ace->irq != NO_IRQ)
> + if (ace->irq)
> free_irq(ace->irq, ace);
>
> iounmap(ace->baseaddr);
> @@ -1156,7 +1156,7 @@ static int __devinit ace_probe(struct platform_device *dev)
> resource_size_t physaddr = 0;
> int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
> u32 id = dev->id;
> - int irq = NO_IRQ;
> + int irq = 0;
> int i;
>
> dev_dbg(&dev->dev, "ace_probe(%p)\n", dev);
> --
> 1.7.5.4
>


\
 
 \ /
  Last update: 2012-01-02 09:23    [W:0.097 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site