lkml.org 
[lkml]   [2012]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: x86/mce: machine check warning during poweroff
On 01/13/2012 01:24 PM, Andi Kleen wrote:
>
>> Yes, I think you're hitting the exact same thing.
>>
>> I *think* that what is going on is that we free some data structure
>> too early, and we didn't use to free them before.
>
> Assuming the problem is with the multiple devices (not fully sure):
>
> The redundant devices don't make much sense anyways, they are all
> mirrors of each other
> (state changes always affect all CPUs) Could just collapse down to a
> single device and symlink
> the others.
>
> -Andi
>
>

this showed up using no_console_suspend


131.875143] usb 5-1: device descriptor read/64, error -110
[ 140.599340] PM: Syncing filesystems ... done.
[ 140.815981] PM: Preparing system for mem sleep
[ 140.829117] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[ 140.840150] Freezing remaining freezable tasks ...
[ 147.079160] usb 5-1: device descriptor read/64, error -110
[ 147.282166] usb 5-1: new full-speed USB device number 6 using uhci_hcd
[ 157.686165] usb 5-1: device not accepting address 6, error -110
[ 157.788183] usb 5-1: new full-speed USB device number 7 using uhci_hcd
[ 160.849310]
[ 160.849320] Freezing of tasks failed after 20.00 seconds (1 tasks
refusing to freeze, wq_busy=0):
[ 160.849460] khubd D f5d90020 0 20 2 0x00000000
[ 160.849471] f5d95d50 00000046 f5d095d0 f5d90020 00000000 c16ec3c0
bce8e78a 00000024
[ 160.849488] c16ec3c0 bce7b7f6 00000024 f60063c0 f5d09170 f5d95d20
c120490b c1039aa6
[ 160.849505] 00000000 00000046 c1721180 00000296 f5d95d70 f5d95d40
c1465208 00000000
[ 160.849521] Call Trace:
[ 160.849538] [<c120490b>] ? do_raw_spin_lock+0x3b/0xf0
[ 160.849548] [<c1039aa6>] ? lock_timer_base.isra.24+0x26/0x50
[ 160.849558] [<c1465208>] ? _raw_spin_lock_irqsave+0x58/0x70
[ 160.849567] [<c1204a4e>] ? do_raw_spin_unlock+0x4e/0x90
[ 160.849574] [<c1463c30>] schedule+0x30/0x50
[ 160.849582] [<c1461b7f>] schedule_timeout+0x10f/0x1f0
[ 160.849589] [<c10396f0>] ? usleep_range+0x40/0x40
[ 160.849597] [<c1463ae0>] wait_for_common+0xb0/0x120
[ 160.849605] [<c1053bb0>] ? try_to_wake_up+0x260/0x260
[ 160.849614] [<c1463bdd>] wait_for_completion_timeout+0xd/0x10
[ 160.849624] [<c13250e1>] usb_start_wait_urb+0xb1/0xe0
[ 160.849632] [<c10e0101>] ? sys_swapon+0xab1/0xc50
[ 160.849640] [<c1325308>] usb_control_msg+0xb8/0xf0
[ 160.849648] [<c12ad1e8>] ? _dev_info+0x28/0x30
[ 160.849656] [<c131e627>] hub_port_init+0x627/0x710
[ 160.849664] [<c131d396>] ? usb_set_device_state+0x76/0x130
[ 160.849672] [<c1320906>] hub_thread+0x626/0x1080
[ 160.849681] [<c10515a1>] ? finish_task_switch+0x31/0xf0
[ 160.849688] [<c14635c0>] ? __schedule+0x3b0/0x7b0
[ 160.849698] [<c10490c0>] ? __init_waitqueue_head+0x50/0x50
[ 160.849705] [<c1050ef9>] ? complete+0x49/0x60
[ 160.849713] [<c13202e0>] ? usb_remote_wakeup+0x40/0x40
[ 160.849720] [<c1048928>] kthread+0x78/0x80
[ 160.849728] [<c10488b0>] ? __init_kthread_worker+0x60/0x60
[ 160.849736] [<c146b0fe>] kernel_thread_helper+0x6/0xd
[ 160.849755]
[ 160.849759] Restarting tasks ... done.
[ 160.865733] power_supply BAT0: uevent
[ 160.865737] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[ 160.886551] power_supply BAT0: prop STATUS=Full
[ 160.886562] power_supply BAT0: prop PRESENT=1
[ 160.886570] power_supply BAT0: prop TECHNOLOGY=Unknown
[ 160.886577] power_supply BAT0: prop CYCLE_COUNT=0

I can supply full dmesg if needed.
a bisect on this should not take too long, just need the time to do so.

last good kernel I have here is: 3.2.0-06541-gf33180c

Justin P. Mattock


\
 
 \ /
  Last update: 2012-01-13 22:41    [W:0.105 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site