lkml.org 
[lkml]   [2011]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[RFC PATCH 0/2 V2] Using regmap with ADIS devices.
    Date
    Hi Mark,

    I've tried your suggestion of doing things at the marshalling level
    and would be interested to hear what you think of the result.

    Note these patches are not clean yet hence no sign offs.

    The tricky bit was triggering the two separate writes per register
    and the result is somewhat hacky.

    An alternative there would be to add some configuration options to
    the spi_write (or allow a couple of varients) so as to break the
    long transfer that would generate up and hence bounce the cs line
    in the right place. Gah. SPI can be so uggly sometimes.

    If this approach isn't acceptable in principle I'll give up and
    conclude that these parts will never play well! (which is fine
    by me if true).

    Jonathan

    Jonathan Cameron (2):
    regmap: Support half writes and padding between register and value.
    staging:iio:imu:adis16400 regmap introduction.

    drivers/base/regmap/internal.h | 1 +
    drivers/base/regmap/regmap.c | 42 ++++-
    drivers/staging/iio/imu/Kconfig | 1 +
    drivers/staging/iio/imu/adis16400.h | 2 +
    drivers/staging/iio/imu/adis16400_core.c | 301 +++++++++++++++++++-----------
    include/linux/regmap.h | 6 +
    6 files changed, 234 insertions(+), 119 deletions(-)

    --
    1.7.3.4



    \
     
     \ /
      Last update: 2011-09-08 16:03    [W:0.020 / U:0.676 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site