lkml.org 
[lkml]   [2011]   [Sep]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 08/16] ext4: Calculate and verify checksums for inode bitmaps
From
Date
On 2011-09-02, at 1:18 PM, Darrick J. Wong wrote:
> On Wed, Aug 31, 2011 at 10:49:05PM -0600, Andreas Dilger wrote:
>> On 2011-08-31, at 6:31 PM, Darrick J. Wong wrote:
>>> Compute and verify the checksum of the inode bitmap; the checkum is stored in
>>> the block group descriptor.
>>
>> I would prefer if there was a 16-bit checksum for the (most common)
>> 32-byte group descriptors, and this was extended to a 32-bit checksum
>> for the (much less common) 64-byte+ group descriptors. For filesystems
>> that are newly formatted with the 64bit feature it makes no difference,
>> but virtually all ext3/4 filesystems have only the smaller group descriptors.
>>
>> Regardless of whether using half of the crc32c is better or worse than
>> using crc16 for the bitmap blocks, storing _any_ checksum is better than
>> storing nothing at all. I would propose the following:
>
> That's an interesting reframing of the argument that I hadn't considered.
> I'd fallen into the idea of needing crc32c because of its bit error
> guarantees (all corruptions of odd numbers of bits and all corruptions of
> fewer than ...4? bits) that I hadn't quite realized that even if crc16
> can't guarantee to find any corruption at all, it still _might_, and that's
> better than nothing.
>
> Ok, let's split the 32-bit fields and use crc16 for the case of 32-byte block
> group descriptors.

I noticed the crc16 calculation is actually _slower_ than crc32c,
probably because the CPU cannot use 32-bit values when computing the
result, so it has to do a lot of word masking, per your table at
https://ext4.wiki.kernel.org/index.php/Ext4_Metadata_Checksums.
Also, there is the question of whether computing two different
checksums is needlessly complicating the code, or if it is easier
to just compute crc32c all the time and only make the storing of
the high 16 bits conditional.

What I'm suggesting is always computing the crc32c, but for filesystems
that are not formatted with the 64bit option just store the low 16 bits
of the crc32c value into bg_{block,inode}_bitmap_csum_lo. This is much
better than not computing a checksum here at all. The only open question
is whether 1/2 of crc32c is substantially worse at detecting errors than
crc16 or not?


I was also thinking whether the EXT4_FEATURE_RO_COMPAT_METADATA_CSUM
feature should also cause the bg_checksum to do the same (store only
low 16 bits of crc32c) just for the improved speed?

It might be interesting to redo the table that you computed, but
using a loop that is only computing the checksums for small blocks
of data (e.g. 32 bytes and 4096 bytes in a loop for a total of 512MB)
to see what the overhead of the cryptoapi and hardware calls are.

>> struct ext4_group_desc
>> {
>> __le32 bg_block_bitmap_lo; /* Blocks bitmap block */
>> __le32 bg_inode_bitmap_lo; /* Inodes bitmap block */
>> __le32 bg_inode_table_lo; /* Inodes table block */
>> __le16 bg_free_blocks_count_lo; /* Free blocks count */
>> __le16 bg_free_inodes_count_lo; /* Free inodes count */
>> __le16 bg_used_dirs_count_lo; /* Directories count */
>> __le16 bg_flags; /* EXT4_BG_flags (INODE_UNINIT, etc) */
>> __le32 bg_exclude_bitmap_lo; /* Exclude bitmap block */
>> __le16 bg_block_bitmap_csum_lo; /* Block bitmap checksum */
>> __le16 bg_inode_bitmap_csum_lo; /* Inode bitmap checksum */
>> __le16 bg_itable_unused_lo; /* Unused inodes count */
>> __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */
>> __le32 bg_block_bitmap_hi; /* Blocks bitmap block MSB */
>> __le32 bg_inode_bitmap_hi; /* Inodes bitmap block MSB */
>> __le32 bg_inode_table_hi; /* Inodes table block MSB */
>> __le16 bg_free_blocks_count_hi; /* Free blocks count MSB */
>> __le16 bg_free_inodes_count_hi; /* Free inodes count MSB */
>> __le16 bg_used_dirs_count_hi; /* Directories count MSB */
>> __le16 bg_itable_unused_hi; /* Unused inodes count MSB */
>> __le32 bg_exclude_bitmap_hi; /* Exclude bitmap block MSB */
>> __le16 bg_block_bitmap_csum_hi; /* Blocks bitmap checksum MSB */
>> __le16 bg_inode_bitmap_csum_hi; /* Inodes bitmap checksum MSB */
>> __le32 bg_reserved2;
>> };
>>
>> This is also different from your layout because it locates the block bitmap
>> checksum field before the inode bitmap checksum, to more closely match the
>> order of other fields in this structure.
>
> Er.. I reversed the order in the structure definition just prior to publishing,
> and forgot to update the wiki page. Well I guess I'm about to update it again.
> :)
>
>>> /*
>>> diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
>>> index 9c63f27..53faffc 100644
>>> --- a/fs/ext4/ialloc.c
>>> +++ b/fs/ext4/ialloc.c
>>> @@ -82,12 +82,18 @@ static unsigned ext4_init_inode_bitmap(struct super_block *sb,
>>> ext4_free_inodes_set(sb, gdp, 0);
>>> ext4_itable_unused_set(sb, gdp, 0);
>>> memset(bh->b_data, 0xff, sb->s_blocksize);
>>> + ext4_bitmap_csum_set(sb, block_group,
>>> + &gdp->bg_inode_bitmap_csum, bh,
>>> + (EXT4_INODES_PER_GROUP(sb) + 7) / 8);
>>
>> The number of inodes per group is already always a multiple of 8.
>
> Ok. I suppose we can fix that in the lines below too.
>
>>> return 0;
>>> }
>>>
>>> memset(bh->b_data, 0, (EXT4_INODES_PER_GROUP(sb) + 7) / 8);
>>> ext4_mark_bitmap_end(EXT4_INODES_PER_GROUP(sb), sb->s_blocksize * 8,
>>> bh->b_data);
>>> + ext4_bitmap_csum_set(sb, block_group, &gdp->bg_inode_bitmap_csum, bh,
>>> + (EXT4_INODES_PER_GROUP(sb) + 7) / 8);
>>> + gdp->bg_checksum = ext4_group_desc_csum(sbi, block_group, gdp);
>>>
>>> return EXT4_INODES_PER_GROUP(sb);
>>> }
>>> @@ -118,12 +124,12 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
>>> return NULL;
>>> }
>>> if (bitmap_uptodate(bh))
>>> - return bh;
>>> + goto verify;
>>>
>>> lock_buffer(bh);
>>> if (bitmap_uptodate(bh)) {
>>> unlock_buffer(bh);
>>> - return bh;
>>> + goto verify;
>>> }
>>>
>>> ext4_lock_group(sb, block_group);
>>> @@ -131,6 +137,7 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
>>> ext4_init_inode_bitmap(sb, bh, block_group, desc);
>>> set_bitmap_uptodate(bh);
>>> set_buffer_uptodate(bh);
>>> + set_buffer_verified(bh);
>>> ext4_unlock_group(sb, block_group);
>>> unlock_buffer(bh);
>>> return bh;
>>> @@ -144,7 +151,7 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
>>> */
>>> set_bitmap_uptodate(bh);
>>> unlock_buffer(bh);
>>> - return bh;
>>> + goto verify;
>>> }
>>> /*
>>> * submit the buffer_head for read. We can
>>> @@ -161,6 +168,21 @@ ext4_read_inode_bitmap(struct super_block *sb, ext4_group_t block_group)
>>> block_group, bitmap_blk);
>>> return NULL;
>>> }
>>> +
>>> +verify:
>>> + ext4_lock_group(sb, block_group);
>>> + if (!buffer_verified(bh) &&
>>> + !ext4_bitmap_csum_verify(sb, block_group,
>>> + desc->bg_inode_bitmap_csum, bh,
>>> + (EXT4_INODES_PER_GROUP(sb) + 7) / 8)) {
>>> + ext4_unlock_group(sb, block_group);
>>> + put_bh(bh);
>>> + ext4_error(sb, "Corrupt inode bitmap - block_group = %u, "
>>> + "inode_bitmap = %llu", block_group, bitmap_blk);
>>> + return NULL;
>>
>> At some point we should add a flag like EXT4_BG_INODE_ERROR so that the
>> group can be marked in error on disk, and skipped for future allocations,
>> but the whole filesystem does not need to be remounted read-only. That's
>> for another patch, however.
>
> Agreed. :)
>
> --D
>
>>> + }
>>> + ext4_unlock_group(sb, block_group);
>>> + set_buffer_verified(bh);
>>> return bh;
>>> }
>>>
>>> @@ -265,6 +287,8 @@ void ext4_free_inode(handle_t *handle, struct inode *inode)
>>> ext4_used_dirs_set(sb, gdp, count);
>>> percpu_counter_dec(&sbi->s_dirs_counter);
>>> }
>>> + ext4_bitmap_csum_set(sb, block_group, &gdp->bg_inode_bitmap_csum,
>>> + bitmap_bh, (EXT4_INODES_PER_GROUP(sb) + 7) / 8);
>>> gdp->bg_checksum = ext4_group_desc_csum(sbi, block_group, gdp);
>>> ext4_unlock_group(sb, block_group);
>>>
>>> @@ -784,6 +808,9 @@ static int ext4_claim_inode(struct super_block *sb,
>>> atomic_inc(&sbi->s_flex_groups[f].used_dirs);
>>> }
>>> }
>>> + ext4_bitmap_csum_set(sb, group, &gdp->bg_inode_bitmap_csum,
>>> + inode_bitmap_bh,
>>> + (EXT4_INODES_PER_GROUP(sb) + 7) / 8);
>>> gdp->bg_checksum = ext4_group_desc_csum(sbi, group, gdp);
>>> err_ret:
>>> ext4_unlock_group(sb, group);
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-fsdevel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html



\
 
 \ /
  Last update: 2011-09-02 23:29    [W:1.204 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site