lkml.org 
[lkml]   [2011]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRE: [PATCH 1/8] omap3evm: Enable regulators for camera interface
Hi,
> ________________________________________
> From: Laurent Pinchart [laurent.pinchart@ideasonboard.com]
> Sent: Thursday, September 08, 2011 10:21 PM
> To: Ravi, Deepthy
> Cc: linux-omap@vger.kernel.org; tony@atomide.com; linux@arm.linux.org.uk; linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; mchehab@infradead.org; linux-media@vger.kernel.org; g.liakhovetski@gmx.de; Hiremath, Vaibhav
> Subject: Re: [PATCH 1/8] omap3evm: Enable regulators for camera interface
>
> Hi,
>
> On Thursday 08 September 2011 15:33:51 Deepthy Ravi wrote:
>> From: Vaibhav Hiremath <hvaibhav@ti.com>
>>
>> Enabled 1v8 and 2v8 regulator output, which is being used by
>> camera module.
>
> Thanks for the patch. Just one minor comment below.
>
>> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
>> Signed-off-by: Deepthy Ravi <deepthy.ravi@ti.com>
>> ---
>> arch/arm/mach-omap2/board-omap3evm.c | 40
>> ++++++++++++++++++++++++++++++++++ 1 files changed, 40 insertions(+), 0
>> deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-omap3evm.c
>> b/arch/arm/mach-omap2/board-omap3evm.c index a1184b3..8333ee4 100644
>> --- a/arch/arm/mach-omap2/board-omap3evm.c
>> +++ b/arch/arm/mach-omap2/board-omap3evm.c
>> @@ -273,6 +273,44 @@ static struct omap_dss_board_info omap3_evm_dss_data =
>> { .default_device = &omap3_evm_lcd_device,
>> };
>>
>> +static struct regulator_consumer_supply omap3evm_vaux3_supply = {
>> + .supply = "cam_1v8",
>> +};
>> +
>> +static struct regulator_consumer_supply omap3evm_vaux4_supply = {
>> + .supply = "cam_2v8",
>> +};
>> +
>> +/* VAUX3 for CAM_1V8 */
>> +static struct regulator_init_data omap3evm_vaux3 = {
>> + .constraints = {
>> + .min_uV = 1800000,
>> + .max_uV = 1800000,
>> + .apply_uV = true,
>> + .valid_modes_mask = REGULATOR_MODE_NORMAL
>> + | REGULATOR_MODE_STANDBY,
>> + .valid_ops_mask = REGULATOR_CHANGE_MODE
>> + | REGULATOR_CHANGE_STATUS,
>> + },
>> + .num_consumer_supplies = 1,
>> + .consumer_supplies = &omap3evm_vaux3_supply,
>
> I might be wrong, but I think we're standardizing on using REGULATOR_SUPPLY
> arrays as described in commit 786b01a8c1db0c0decca55d660a2a3ebd7cfb26b
> ("cleanup regulator supply definitions in mach-omap2").
>
[Deepthy Ravi] Yes, you are right. I will modify it.
>> +};
>> +
>> +/* VAUX4 for CAM_2V8 */
>> +static struct regulator_init_data omap3evm_vaux4 = {
>> + .constraints = {
>> + .min_uV = 1800000,
>> + .max_uV = 1800000,
>> + .apply_uV = true,
>> + .valid_modes_mask = REGULATOR_MODE_NORMAL
>> + | REGULATOR_MODE_STANDBY,
>> + .valid_ops_mask = REGULATOR_CHANGE_MODE
>> + | REGULATOR_CHANGE_STATUS,
>> + },
>> + .num_consumer_supplies = 1,
>> + .consumer_supplies = &omap3evm_vaux4_supply,
>> +};
>> +
>> static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
>> REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
>> };
>> @@ -499,6 +537,8 @@ static struct twl4030_platform_data omap3evm_twldata =
>> { .vio = &omap3evm_vio,
>> .vmmc1 = &omap3evm_vmmc1,
>> .vsim = &omap3evm_vsim,
>> + .vaux3 = &omap3evm_vaux3,
>> + .vaux4 = &omap3evm_vaux4,
>> };
>>
>> static int __init omap3_evm_i2c_init(void)
>
> --
> Regards,
>
> Laurent Pinchart
>

Thanks,
Deepthy Ravi.


\
 
 \ /
  Last update: 2011-09-13 09:13    [W:0.054 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site