lkml.org 
[lkml]   [2011]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH] staging:iio:magnetometer:ak8975 use platform_data to pass the gpio number.
Basically provide another means to set this value given irq_to_gpio has
gone away.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
---
drivers/staging/iio/magnetometer/ak8975.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/drivers/staging/iio/magnetometer/ak8975.c b/drivers/staging/iio/magnetometer/ak8975.c
index c1ff430..ab0e26c 100644
--- a/drivers/staging/iio/magnetometer/ak8975.c
+++ b/drivers/staging/iio/magnetometer/ak8975.c
@@ -477,7 +477,10 @@ static int ak8975_probe(struct i2c_client *client,
int err;

/* Grab and set up the supplied GPIO. */
- eoc_gpio = -1; /* FIXME: irq_to_gpio(client->irq) */
+ if (client->dev.platform_data == NULL)
+ eoc_gpio = -1;
+ else
+ eoc_gpio = *(int *)(client->dev.platform_data);

/* We may not have a GPIO based IRQ to scan, that is fine, we will
poll if so */
--
1.7.3.4


\
 
 \ /
  Last update: 2011-09-01 10:59    [W:0.054 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site