lkml.org 
[lkml]   [2011]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/7] serial/8250: move UPIO_TSI to powerpc
From
Date
On Mon, 2011-06-27 at 23:45 +0200, Arnd Bergmann wrote:
> This iotype is only used by the legacy_serial code in powerpc, so the
> code should live there, rather than be compiled in for every 8250
> driver.

Obviously untested :-)

Misses the definition of UART_IIR etc...

I'm committing a fixed version in my tree

Cheers.
Ben.

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: Greg Kroah-Hartman <gregkh@suse.de>
> Cc: linux-serial@vger.kernel.org
> ---
> arch/powerpc/kernel/legacy_serial.c | 24 ++++++++++++++++++++++++
> drivers/tty/serial/8250.c | 23 -----------------------
> 2 files changed, 24 insertions(+), 23 deletions(-)
>
> diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
> index 2b97b80..b229e1e 100644
> --- a/arch/powerpc/kernel/legacy_serial.c
> +++ b/arch/powerpc/kernel/legacy_serial.c
> @@ -47,6 +47,24 @@ static struct __initdata of_device_id legacy_serial_parents[] = {
> static unsigned int legacy_serial_count;
> static int legacy_serial_console = -1;
>
> +static unsigned int tsi_serial_in(struct uart_port *p, int offset)
> +{
> + unsigned int tmp;
> + offset = offset << p->regshift;
> + if (offset == UART_IIR) {
> + tmp = readl(p->membase + (UART_IIR & ~3));
> + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
> + } else
> + return readb(p->membase + offset);
> +}
> +
> +static void tsi_serial_out(struct uart_port *p, int offset, int value)
> +{
> + offset = offset << p->regshift;
> + if (!((offset == UART_IER) && (value & UART_IER_UUE)))
> + writeb(value, p->membase + offset);
> +}
> +
> static int __init add_legacy_port(struct device_node *np, int want_index,
> int iotype, phys_addr_t base,
> phys_addr_t taddr, unsigned long irq,
> @@ -102,6 +120,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
> legacy_serial_ports[index].iobase = base;
> else
> legacy_serial_ports[index].mapbase = base;
> +
> legacy_serial_ports[index].iotype = iotype;
> legacy_serial_ports[index].uartclk = clock;
> legacy_serial_ports[index].irq = irq;
> @@ -112,6 +131,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
> legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
> legacy_serial_infos[index].irq_check_parent = irq_check_parent;
>
> + if (iotype == UPIO_TSI) {
> + legacy_serial_ports[index].serial_in = tsi_serial_in;
> + legacy_serial_ports[index].serial_out = tsi_serial_out;
> + }
> +
> printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
> index, np->full_name);
> printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
> diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
> index c8f107e..d575ccb 100644
> --- a/drivers/tty/serial/8250.c
> +++ b/drivers/tty/serial/8250.c
> @@ -345,24 +345,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset)
> return readl(p->membase + offset);
> }
>
> -static unsigned int tsi_serial_in(struct uart_port *p, int offset)
> -{
> - unsigned int tmp;
> - offset = map_8250_in_reg(p, offset) << p->regshift;
> - if (offset == UART_IIR) {
> - tmp = readl(p->membase + (UART_IIR & ~3));
> - return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
> - } else
> - return readb(p->membase + offset);
> -}
> -
> -static void tsi_serial_out(struct uart_port *p, int offset, int value)
> -{
> - offset = map_8250_out_reg(p, offset) << p->regshift;
> - if (!((offset == UART_IER) && (value & UART_IER_UUE)))
> - writeb(value, p->membase + offset);
> -}
> -
> /* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
> static inline void dwapb_save_out_value(struct uart_port *p, int offset,
> int value)
> @@ -431,11 +413,6 @@ static void set_io_from_upio(struct uart_port *p)
> p->serial_out = mem32_serial_out;
> break;
>
> - case UPIO_TSI:
> - p->serial_in = tsi_serial_in;
> - p->serial_out = tsi_serial_out;
> - break;
> -
> case UPIO_DWAPB:
> p->serial_in = mem_serial_in;
> p->serial_out = dwapb_serial_out;




\
 
 \ /
  Last update: 2011-09-01 08:05    [W:0.116 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site