lkml.org 
[lkml]   [2011]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] arm/dt: Tegra: Add support-bit to SDHCI nodes
Date
For Seaboard's internal eMMC, this makes the difference between a
5.5MB/s and 10.2MB/s transfer rate. On Harmony, there wasn't any
measurable difference on my cheap/slow ~2MB/s card.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
This depends on patch 1 in this series. I assume Grant or Arnd will apply
them both to whatever branch usually takes .dts updates.

arch/arm/boot/dts/tegra-harmony.dts | 1 +
arch/arm/boot/dts/tegra-seaboard.dts | 4 ++++
2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index e581866..0e225b8 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -66,5 +66,6 @@
cd-gpios = <&gpio 58 0>; /* gpio PH2 */
wp-gpios = <&gpio 59 0>; /* gpio PH3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
};
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 64cedca..a72299b 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -25,4 +25,8 @@
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
+
+ sdhci@c8000600 {
+ support-8bit;
+ };
};
--
1.7.0.4


\
 
 \ /
  Last update: 2011-08-30 21:21    [W:0.041 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site