lkml.org 
[lkml]   [2011]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 14/18] Staging: cx25821: Fix wrong line endings in cx25821-video-upstream-ch2.c
Date
Change obscure line endings to less obscure ones. Rationale: improve
readability.

Signed-off-by: Leonid V. Fedorenchik <leonidsbox@gmail.com>
---
.../staging/cx25821/cx25821-video-upstream-ch2.c | 24 +++++++------------
1 files changed, 9 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c b/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
index b02dbe0..b281ced 100644
--- a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
+++ b/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
@@ -179,17 +179,14 @@ int cx25821_risc_buffer_upstream_ch2(struct cx25821_dev *dev,

/* Even field */
rp = cx25821_risc_field_upstream_ch2(dev, rp,
- dev->
- _data_buf_phys_addr_ch2 +
- databuf_offset,
- bottom_offset, 0x200, bpl,
- singlefield_lines,
- fifo_enable, EVEN_FIELD);
+ dev->_data_buf_phys_addr_ch2 + databuf_offset,
+ bottom_offset, 0x200, bpl, singlefield_lines,
+ fifo_enable, EVEN_FIELD);

if (frame == 0) {
risc_flag = RISC_CNT_RESET;
- risc_phys_jump_addr =
- dev->_dma_phys_start_addr_ch2 + risc_program_size;
+ risc_phys_jump_addr = dev->_dma_phys_start_addr_ch2 +
+ risc_program_size;
} else {
risc_flag = RISC_CNT_INC;
risc_phys_jump_addr = dev->_dma_phys_start_addr_ch2;
@@ -511,9 +508,8 @@ static int cx25821_upstream_buffer_prepare_ch2(struct cx25821_dev *dev,
return ret;

/* Creating RISC programs */
- ret =
- cx25821_risc_buffer_upstream_ch2(dev, dev->pci, 0, bpl,
- dev->_lines_count_ch2);
+ ret = cx25821_risc_buffer_upstream_ch2(dev, dev->pci, 0, bpl,
+ dev->_lines_count_ch2);
if (ret < 0) {
pr_info("Failed creating Video Upstream Risc programs!\n");
goto error;
@@ -806,8 +802,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
}
}

- retval =
- cx25821_sram_channel_setup_upstream(dev, sram_ch,
+ retval = cx25821_sram_channel_setup_upstream(dev, sram_ch,
dev->_line_size_ch2, 0);

/* setup fifo + format */
@@ -817,8 +812,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
dev->upstream_databuf_size_ch2 = data_frame_size * 2;

/* Allocating buffers and prepare RISC program */
- retval =
- cx25821_upstream_buffer_prepare_ch2(dev, sram_ch,
+ retval = cx25821_upstream_buffer_prepare_ch2(dev, sram_ch,
dev->_line_size_ch2);
if (retval < 0) {
pr_err("%s: Failed to set up Video upstream buffers!\n",
--
1.7.0.4


\
 
 \ /
  Last update: 2011-08-30 06:21    [W:0.087 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site