Messages in this thread |  | | | Date | Fri, 12 Aug 2011 14:58:18 +0200 | | From | "Udo A. Steinberg" <> | | Subject | Kernel panic with intel_iommu=on |
| |
Hello,
After upgrading from firefox 5.0.1 to 6.0b5, my machine locks up hard, the moment firefox is started under Linux 3.0 with Intel IOMMU enabled.
With intel_iommu=off, everything works fine. Likewise, when going back to firefox 5.0.1, everything works fine. I've managed to capture the following kernel output via the serial console.
Kernel panic - not syncing: DMAR hardware is malfunctioning
Pid: 0, comm: swapper Not tainted 3.0.0 #1 Call Trace: [<c132ffb8>] ? panic+0x4d/0x12b [<c112d889>] ? __iommu_flush_iotlb+0x199/0x1ce [<c112f0e5>] ? flush_unmaps+0xe5/0xe5 [<c112f05d>] ? flush_unmaps+0x5d/0xe5 [<c112f0e5>] ? flush_unmaps+0xe5/0xe5 [<c112f0f7>] ? flush_unmaps_timeout+0x12/0x1f [<c102f445>] ? run_timer_softirq+0x139/0x1b2 [<c102b303>] ? __do_softirq+0x68/0xe0 [<c102b29b>] ? local_bh_enable_ip+0x6a/0x6a <IRQ> [<c102b4cd>] ? irq_exit+0x32/0x84 [<c101363f>] ? smp_apic_timer_interrupt+0x69/0x73 [<c1332072>] ? apic_timer_interrupt+0x2a/0x30 [<c100708d>] ? mwait_idle+0x47/0x4c [<c1001467>] ? cpu_idle+0x41/0x5b [<c14b45c0>] ? start_kernel+0x258/0x25d
Any suggestions on how to debug what exactly is going wrong?
The board is an Intel DQ35JO with Bearlake-Q chipset. I'm running
xorg-server-1.9.5 xf86-video-intel-2.15.0 libdrm-2.4.25
Below the output of the kernel with intel_iommu=off.
Initializing cgroup subsys cpu Linux version 3.0.0 (root@weybridge) (gcc version 4.5.3 (GCC) ) #1 SMP Sun Jul 24 14:26:51 CEST 2011 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 0000000000090000 (reserved) BIOS-e820: 0000000000090000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003e02f000 (usable) BIOS-e820: 000000003e02f000 - 000000003e031000 (reserved) BIOS-e820: 000000003e031000 - 000000003e113000 (usable) BIOS-e820: 000000003e113000 - 000000003e1e3000 (ACPI NVS) BIOS-e820: 000000003e1e3000 - 000000003e1e8000 (usable) BIOS-e820: 000000003e1e8000 - 000000003e1f2000 (ACPI data) BIOS-e820: 000000003e1f2000 - 000000003e1f3000 (usable) BIOS-e820: 000000003e1f3000 - 000000003e1ff000 (ACPI data) BIOS-e820: 000000003e1ff000 - 000000003e200000 (usable) BIOS-e820: 000000003e200000 - 000000003f000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.4 present. DMI: /DQ35JO, BIOS JOQ3510J.86A.1143.2010.1209.0048 12/09/2010 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3e200 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-DFFFF write-protect E0000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03E200000 mask FFFE00000 uncachable 2 base 03E400000 mask FFFC00000 uncachable 3 base 03E800000 mask FFF800000 uncachable 4 base 03F000000 mask FFF000000 uncachable 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 01800000 Base memory trampoline at [c0099000] 99000 size 16384 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 17fb000-1800000 ACPI: RSDP 000fe020 00014 (v00 INTEL ) ACPI: RSDT 3e1fd038 00068 (v01 INTEL DQ3510J 00000477 01000013) ACPI: FACP 3e1fc000 00074 (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: DSDT 3e1f8000 03D84 (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: FACS 3e186000 00040 ACPI: APIC 3e1f7000 00078 (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: WDDT 3e1f6000 00040 (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: MCFG 3e1f5000 0003C (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: ASF! 3e1f4000 000A6 (v32 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: HPET 3e1f3000 00038 (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: DMAR 3e1f1000 000F8 (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: ASPT 3e1f0000 00034 (v03 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: WDTT 3e1ef000 002CC (v01 INTEL DQ3510J 00000477 MSFT 01000013) ACPI: SSDT 3e1ee000 00204 (v01 INTEL CpuPm 00000477 MSFT 01000013) ACPI: SSDT 3e1ed000 001F9 (v01 INTEL Cpu0Ist 00000477 MSFT 01000013) ACPI: SSDT 3e1ec000 001F9 (v01 INTEL Cpu1Ist 00000477 MSFT 01000013) ACPI: SSDT 3e1eb000 000DD (v01 INTEL Cpu0Cst 00000477 MSFT 01000013) ACPI: SSDT 3e1ea000 000DD (v01 INTEL Cpu1Cst 00000477 MSFT 01000013) ACPI: SSDT 3e1e9000 000DD (v01 INTEL Cpu2Cst 00000477 MSFT 01000013) ACPI: SSDT 3e1e8000 000DD (v01 INTEL Cpu3Cst 00000477 MSFT 01000013) ACPI: TCPA 3e114000 00032 (v02 INTEL TIANO 00000002 MSFT 01000013) ACPI: Local APIC address 0xfee00000 106MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0003e200 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000010 -> 0x0000008f 0: 0x00000090 -> 0x0000009d 0: 0x00000100 -> 0x0003e02f 0: 0x0003e031 -> 0x0003e113 0: 0x0003e1e3 -> 0x0003e1e8 0: 0x0003e1f2 -> 0x0003e1f3 0: 0x0003e1ff -> 0x0003e200 On node 0 totalpages: 254116 free_area_init_node: node 0, pgdat c14ad900, node_mem_map f7035200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3948 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 213 pages used for memmap HighMem zone: 26693 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a301 base: 0xfed00000 4 Processors exceeds NR_CPUS limit of 2 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000008f000 - 0000000000090000 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 3f000000 (gap: 3f000000:b1000000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 9 pages/cpu @f6c00000 s23168 r0 d13696 u2097152 pcpu-alloc: s23168 r0 d13696 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 252127 Kernel command line: root=/dev/sda1 intel_iommu=off console=ttyS0,115200,8N1 Intel-IOMMU: disabled PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Initializing HighMem for node 0 (000377fe:0003e200) Memory: 1002112k/1017856k available (3277k kernel code, 14352k reserved, 1536k data, 332k init, 107624k highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc14b4000 - 0xc1507000 ( 332 kB) .data : 0xc133351d - 0xc14b3840 (1536 kB) .text : 0xc1000000 - 0xc133351d (3277 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:320 CPU 0 irqstacks, hard=f680c000 soft=f680e000 Console: colour VGA+ 80x25 console [ttyS0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2989.547 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5979.09 BogoMIPS (lpj=29895470) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20110413 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 CPU 1 irqstacks, hard=f686a000 soft=f686c000 Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 99000 Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (11958.09 BogoMIPS). PM: Registering ACPI NVS region at 3e113000 (851968 bytes) NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000effff] pci_root PNP0A03:00: host bridge window [mem 0xf8000000-0xfeafffff] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xefffffff] pci 0000:00:00.0: [8086:29b0] type 0 class 0x000600 pci 0000:00:02.0: [8086:29b2] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0x50480000-0x504fffff] pci 0000:00:02.0: reg 14: [io 0x2430-0x2437] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref] pci 0000:00:02.0: reg 1c: [mem 0x50300000-0x503fffff] pci 0000:00:02.1: [8086:29b3] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0x50400000-0x5047ffff] pci 0000:00:03.0: [8086:29b4] type 0 class 0x000780 pci 0000:00:03.0: reg 10: [mem 0x50526100-0x5052610f 64bit] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: [8086:10bd] type 0 class 0x000200 pci 0000:00:19.0: reg 10: [mem 0x50500000-0x5051ffff] pci 0000:00:19.0: reg 14: [mem 0x50524000-0x50524fff] pci 0000:00:19.0: reg 18: [io 0x2400-0x241f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 pci 0000:00:1a.0: reg 20: [io 0x20e0-0x20ff] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 pci 0000:00:1a.1: reg 20: [io 0x20c0-0x20df] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 pci 0000:00:1a.2: reg 20: [io 0x20a0-0x20bf] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 pci 0000:00:1a.7: reg 10: [mem 0x50525c00-0x50525fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0x50520000-0x50523fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0x2080-0x209f] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0x2060-0x207f] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0x2040-0x205f] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0x50525800-0x50525bff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 pci 0000:00:1f.0: [8086:2914] type 0 class 0x000601 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x2428-0x242f] pci 0000:00:1f.2: reg 14: [io 0x243c-0x243f] pci 0000:00:1f.2: reg 18: [io 0x2420-0x2427] pci 0000:00:1f.2: reg 1c: [io 0x2438-0x243b] pci 0000:00:1f.2: reg 20: [io 0x2020-0x203f] pci 0000:00:1f.2: reg 24: [mem 0x50525000-0x505257ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0x50526000-0x505260ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:03:00.0: [11ab:6101] type 0 class 0x000101 pci 0000:03:00.0: reg 10: [io 0x1018-0x101f] pci 0000:03:00.0: reg 14: [io 0x1024-0x1027] pci 0000:03:00.0: reg 18: [io 0x1010-0x1017] pci 0000:03:00.0: reg 1c: [io 0x1020-0x1023] pci 0000:03:00.0: reg 20: [io 0x1000-0x100f] pci 0000:03:00.0: reg 24: [mem 0x50200000-0x502001ff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: PME# supported from D0 D1 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:1c.2: PCI bridge to [bus 03-03] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x50200000-0x502fffff] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1c.4: PCI bridge to [bus 05-05] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:06:00.0: [109e:036e] type 0 class 0x000400 pci 0000:06:00.0: reg 10: [mem 0x50001000-0x50001fff pref] pci 0000:06:00.1: [109e:0878] type 0 class 0x000480 pci 0000:06:00.1: reg 10: [mem 0x50000000-0x50000fff pref] pci 0000:06:03.0: [11c1:5811] type 0 class 0x000c00 pci 0000:06:03.0: reg 10: [mem 0x50100000-0x50100fff] pci 0000:06:03.0: supports D1 D2 pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot pci 0000:06:03.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0x50100000-0x501fffff] pci 0000:00:1e.0: bridge window [mem 0x50000000-0x500fffff 64bit pref] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x40000000-0xefffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000008f000 - 000000000008ffff reserve RAM buffer: 000000000009dc00 - 000000000009ffff reserve RAM buffer: 000000003e02f000 - 000000003fffffff reserve RAM buffer: 000000003e113000 - 000000003fffffff reserve RAM buffer: 000000003e1e8000 - 000000003fffffff reserve RAM buffer: 000000003e1f3000 - 000000003fffffff reserve RAM buffer: 000000003e200000 - 000000003fffffff HPET: 4 timers in total, 0 timers will be used for per-cpu timer Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000e0000-0x000effff window] pnp 00:00: [mem 0xf8000000-0xfeafffff window] pnp 00:00: [mem 0x40000000-0xefffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [mem 0xf0000000-0xf7ffffff] pnp 00:01: [mem 0xfeb00000-0xfeb03fff] pnp 00:01: [mem 0xfed13000-0xfed13fff] pnp 00:01: [mem 0xfed14000-0xfed17fff] pnp 00:01: [mem 0xfed18000-0xfed18fff] pnp 00:01: [mem 0xfed19000-0xfed19fff] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] pnp 00:01: [mem 0xfed20000-0xfed3ffff] pnp 00:01: [mem 0xfed45000-0xfed99fff] pnp 00:01: [mem 0x000c0000-0x000dffff] pnp 00:01: [mem 0x000e0000-0x000fffff] pnp 00:01: [mem 0xffc00000-0xffffffff] system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #0 system 00:01: [mem 0xfeb00000-0xfeb03fff] has been reserved system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:01: [mem 0xfed45000-0xfed99fff] has been reserved system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved system 00:01: [mem 0xffc00000-0xffffffff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: [dma 4] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [io 0x0074-0x0077] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x00f0] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0500-0x053f] pnp 00:06: [io 0x0400-0x047f] pnp 00:06: [io 0x0092] pnp 00:06: [io 0x0680-0x06ff] pnp 00:06: [io 0x0010-0x001f] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [io 0x0080] pnp 00:06: [io 0x0084-0x0086] pnp 00:06: [io 0x0088] pnp 00:06: [io 0x008c-0x008e] pnp 00:06: [io 0x0090-0x009f] system 00:06: [io 0x0500-0x053f] has been reserved system 00:06: [io 0x0400-0x047f] has been reserved system 00:06: [io 0x0680-0x06ff] has been reserved system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:07: [mem 0xfed40000-0xfed44fff] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active) pnp 00:08: [io 0x0060] pnp 00:08: [io 0x0064] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x03f8-0x03ff] pnp 00:09: [irq 4] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:0a: [mem 0xfec00000-0xfec000ff] pnp 00:0a: Plug and Play ACPI device, IDs PNP0003 (active) pnp 00:0b: [mem 0xfed00000-0xfed03fff] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.4: BAR 8: assigned [mem 0xf8000000-0xf81fffff] pci 0000:00:1c.4: BAR 9: assigned [mem 0xf8200000-0xf83fffff 64bit pref] pci 0000:00:1c.4: BAR 7: assigned [io 0x3000-0x3fff] pci 0000:00:1c.3: BAR 8: assigned [mem 0xf8400000-0xf85fffff] pci 0000:00:1c.3: BAR 9: assigned [mem 0xf8600000-0xf87fffff 64bit pref] pci 0000:00:1c.3: BAR 7: assigned [io 0x4000-0x4fff] pci 0000:00:1c.2: BAR 9: assigned [mem 0xf8800000-0xf89fffff 64bit pref] pci 0000:00:1c.1: BAR 8: assigned [mem 0xf8a00000-0xf8bfffff] pci 0000:00:1c.1: BAR 9: assigned [mem 0xf8c00000-0xf8dfffff 64bit pref] pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff] pci 0000:00:1c.0: BAR 8: assigned [mem 0xf8e00000-0xf8ffffff] pci 0000:00:1c.0: BAR 9: assigned [mem 0xf9000000-0xf91fffff 64bit pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x6000-0x6fff] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff] pci 0000:00:1c.0: bridge window [mem 0xf8e00000-0xf8ffffff] pci 0000:00:1c.0: bridge window [mem 0xf9000000-0xf91fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 02-02] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff] pci 0000:00:1c.1: bridge window [mem 0xf8a00000-0xf8bfffff] pci 0000:00:1c.1: bridge window [mem 0xf8c00000-0xf8dfffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 03-03] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.2: bridge window [mem 0x50200000-0x502fffff] pci 0000:00:1c.2: bridge window [mem 0xf8800000-0xf89fffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 04-04] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] pci 0000:00:1c.3: bridge window [mem 0xf8400000-0xf85fffff] pci 0000:00:1c.3: bridge window [mem 0xf8600000-0xf87fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 05-05] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf81fffff] pci 0000:00:1c.4: bridge window [mem 0xf8200000-0xf83fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06-06] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem 0x50100000-0x501fffff] pci 0000:00:1e.0: bridge window [mem 0x50000000-0x500fffff 64bit pref] pci 0000:00:1c.0: enabling device (0000 -> 0003) pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: enabling device (0000 -> 0003) pci 0000:00:1c.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0000 -> 0003) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: enabling device (0000 -> 0003) pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff] pci_bus 0000:00: resource 9 [mem 0x40000000-0xefffffff] pci_bus 0000:01: resource 0 [io 0x6000-0x6fff] pci_bus 0000:01: resource 1 [mem 0xf8e00000-0xf8ffffff] pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf91fffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff] pci_bus 0000:02: resource 1 [mem 0xf8a00000-0xf8bfffff] pci_bus 0000:02: resource 2 [mem 0xf8c00000-0xf8dfffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0x50200000-0x502fffff] pci_bus 0000:03: resource 2 [mem 0xf8800000-0xf89fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] pci_bus 0000:04: resource 1 [mem 0xf8400000-0xf85fffff] pci_bus 0000:04: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf81fffff] pci_bus 0000:05: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref] pci_bus 0000:06: resource 1 [mem 0x50100000-0x501fffff] pci_bus 0000:06: resource 2 [mem 0x50000000-0x500fffff 64bit pref] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:06: resource 7 [mem 0x000e0000-0x000effff] pci_bus 0000:06: resource 8 [mem 0xf8000000-0xfeafffff] pci_bus 0000:06: resource 9 [mem 0x40000000-0xefffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 DMAR: Host address width 36 DMAR: DRHD base: 0x000000feb00000 flags: 0x0 IOMMU 0: reg_base_addr feb00000 ver 1:0 cap c9008020a30270 ecap 1000 DMAR: DRHD base: 0x000000feb01000 flags: 0x0 IOMMU 1: reg_base_addr feb01000 ver 1:0 cap c0000020230270 ecap 1000 DMAR: DRHD base: 0x000000feb03000 flags: 0x1 IOMMU 2: reg_base_addr feb03000 ver 1:0 cap c9008020230270 ecap 1000 DMAR: RMRR base: 0x000000000e0000 end: 0x000000000effff DMAR: RMRR base: 0x0000003e600000 end: 0x0000003effffff DMAR: No ATSR found microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60c microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60c microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba highmem bounce pool size: 64 pages NTFS driver 2.1.30 [Flags: R/O]. msgmni has been set to 1747 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X intel_idle: MWAIT substates: 0x22220 intel_idle: does not run on family 6 model 23 input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] ACPI: acpi_idle registered with cpuidle Monitor-Mwait will be used to enter C-1 state Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A lp: driver loaded but no devices found Real Time Clock Driver v1.12b Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Q35 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000 tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70) [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 45 for MSI/MSI-X [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm] initialized overlay support fbcon: inteldrmfb (fb0) is primary device Refined TSC clocksource calibration: 2989.488 MHz. Switching to clocksource tsc Console: switching to colour frame buffer device 240x75 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 floppy0: no floppy controllers found loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ahci 0000:00:1f.2: irq 46 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0x50525000 port 0x50525100 irq 46 ata2: SATA max UDMA/133 abar m2048@0x50525000 port 0x50525180 irq 46 ata3: SATA max UDMA/133 abar m2048@0x50525000 port 0x50525200 irq 46 ata4: SATA max UDMA/133 abar m2048@0x50525000 port 0x50525280 irq 46 ata5: SATA max UDMA/133 abar m2048@0x50525000 port 0x50525300 irq 46 ata6: SATA max UDMA/133 abar m2048@0x50525000 port 0x50525380 irq 46 pata_marvell 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pata_marvell 0000:03:00.0: setting latency timer to 64 scsi6 : pata_marvell scsi7 : pata_marvell ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18 ata8: DUMMY e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 e1000e: Copyright(c) 1999 - 2011 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 47 for MSI/MSI-X ata2: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01109, max UDMA7 e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:2e:d8:b2 e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 17, io mem 0x50525c00 sd 0:0:0:0: Attached scsi generic sg0 type 0 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50525800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 18, io base 0x000020e0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020c0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 17, io base 0x000020a0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input2 i2c /dev entries driver i801_smbus 0000:00:1f.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 lirc_dev: IR Remote Control driver registered, major 253 IR RC5(x) protocol handler initialized Linux video capture interface: v2.00 i2c-core: driver [tuner] using legacy suspend method sda: sda1 sda2 sda3 < sda5 sda6 > i2c-core: driver [tuner] using legacy resume method sd 0:0:0:0: [sda] Attached SCSI disk i2c-core: driver [msp3400] using legacy suspend method i2c-core: driver [msp3400] using legacy resume method bttv: driver version 0.9.18 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 bttv0: Bt878 (rev 2) at 0000:06:00.0, irq: 21, latency: 32, mmio: 0x50001000 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tveeprom 16-0050: Hauppauge model 37284, rev B221, serial# 3546046 tveeprom 16-0050: tuner model is Philips FM1216 (idx 21, type 5) tveeprom 16-0050: TV standards PAL(B/G) (eeprom 0x04) tveeprom 16-0050: audio processor is MSP3410D (idx 5) tveeprom 16-0050: has radio bttv0: Hauppauge eeprom indicates model#37284 bttv0: tuner type=5 usb 2-5: new high speed USB device number 3 using ehci_hcd msp3400 16-0040: MSP3410D-B4 found @ 0x80 (bt878 #0 [sw]) msp3400 16-0040: msp3400 supports nicam, mode is autodetect tda9887 16-0042: creating new instance tda9887 16-0042: tda988[5/6/7] found tuner 16-0042: Tuner 74 found with type(s) Radio TV. tuner 16-0061: Tuner -1 found with type(s) Radio TV. tuner-simple 16-0061: creating new instance tuner-simple 16-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 . firewire_core: created device fw0: GUID 0090270001fbb355, S400 . ok usbcore: registered new interface driver uvcvideo USB Video Class driver (v1.1.0) Registered IR keymap rc-hauppauge input: i2c IR (Hauppauge) as /devices/virtual/rc/rc0/input3 rc0: i2c IR (Hauppauge) as /devices/virtual/rc/rc0 ir-kbd-i2c: i2c IR (Hauppauge) detected at i2c-16/16-0018/ir0 [bt878 #0 [sw]] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver Bt87x 0000:06:00.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 bt87x0: Using board 1, analog, digital (rate 32000 Hz) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: irq 48 for MSI/MSI-X HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: ALC268: BIOS auto-probing. autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) hp_outs=1 (0x15/0x0/0x0/0x0/0x0) mono: mono_out=0x0 inputs: Rear Mic=0x18 Front Mic=0x1a Line=0x19 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d realtek: Enable default setup for auto mode as fallback input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990) input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6 usb 7-2: new low speed USB device number 2 using uhci_hcd 5:2: cannot get min/max values for control 2 (id 5) 5:2: cannot get min/max values for control 2 (id 5) usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: HDA Intel at 0x50520000 irq 48 #1: Brooktree Bt878 at 0x50000000, irq 21 #2: Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:1d.7-5, high speed TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 1 devices found EXT3-fs (sda1): recovery required on readonly filesystem EXT3-fs (sda1): write access will be enabled during recovery EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): recovery complete EXT3-fs (sda1): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input7 Freeing unused kernel memory: 332k freed Write protecting the kernel text: 3280k Write protecting the kernel read-only data: 1232k generic-usb 0003:045E:00DD.0001: input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input0 input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input8 generic-usb 0003:045E:00DD.0002: input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-2/input1 usb 8-2: new low speed USB device number 2 using uhci_hcd input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input9 generic-usb 0003:045E:0083.0003: input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.2-2/input0 Adding 8016428k swap on /dev/mapper/swap. Priority:-1 extents:1 across:8016428k EXT3-fs (sda1): using internal journal kjournald starting. Commit interval 5 seconds EXT3-fs (dm-1): using internal journal EXT3-fs (dm-1): mounted filesystem with writeback data mode kjournald starting. Commit interval 5 seconds EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with writeback data mode e1000e 0000:00:19.0: irq 47 for MSI/MSI-X e1000e 0000:00:19.0: irq 47 for MSI/MSI-X e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Cheers,
- Udo
|  |