lkml.org 
[lkml]   [2011]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Subject: L2x0 OF properties do not include interrupt #
On Wed, Aug 10, 2011 at 03:31:54PM +0100, Rob Herring wrote:
> Here's all the interrupts on the PL310:
>
> DECERRINTR Decode error received on master ports from L3
> SLVERRINTR Slave error received on master ports from L3
> ERRRDINTR Error on L2 data RAM read
> ERRRTINTR Error on L2 tag RAM read
> ERRWDINTR Error on L2 data RAM write
> ERRWTINTR Error on L2 tag RAM write
> PARRDINTR Parity error on L2 data RAM read
> PARRTINTR Parity error on L2 tag RAM read
> ECNTRINTR Event Counter Overflow/Increment
> L2CCINTR L2CC Combined Interrupt Output
>
> It's likely that you would want to split these to different drivers.
> EDAC for parity/bus errors and hw-events for event counters, for example.

I completely agree with you here. In reality, I expect we'll be lucky if
even the combined interrupt is wired up so maybe the individual property
names should only be added on an as-needed basis? For the time being we can
happily get by with something like combined-interrupt = <...>.

Or would you rather specify everything up front?

Will


\
 
 \ /
  Last update: 2011-08-10 17:15    [W:0.109 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site