lkml.org 
[lkml]   [2011]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH V2 00/20] dmaengine/amba-pl08x updates
    Date
    Hi Linus,

    This patchset contains patches for ARM's pl08x DMA controller driver.
    Main changes introduced by this patchset are:
    - Formatting fixes
    - Logical Fixes
    - Support for Peripheral as flow controller
    - Support for sg_len to be greater than 1 for slave transfers
    - Schedule tasklet for error interrupts
    - remove pl08x_pre_boundary() routine
    - support for runtime PM
    - etc

    This patchset is tested on SPEAr600 for following tests:
    - memory to memory copy (using drivers/dma/dmatest, upto 16 threads per channel)
    - peripheral to memory and vice versa (Peripheral: JPEG)

    This was rebased on Vinod's slave-dma.git/next, over following patch:

    commit 1ae105aa7416087f2920c35c3cd16831d0d09c9c
    Merge: 02f8c6a 5a42fb9
    Author: Vinod Koul <vinod.koul@intel.com>
    Date: Wed Jul 27 20:43:21 2011 +0530

    Merge branch 'next' into for-linus-3.0

    Changes Since V1:
    - Dropped many formatting fixes which were added earlier, as they made things
    look even bad.
    - Fixed tabbing issues in PATCH "Add prep_single_byte_llis() routine"
    - Many comments are updated throughout the patchset.
    - Fixed interrupt handler to report spurious interrupt for channels which are
    not used.
    - Clk enabling/disabling done via runtime PM
    - Complete mask of flow controller is not passed from platform data now,
    direction is decided at runtime.
    - pl08x_free_txd() called with locks.
    - Two new patches are added:
    - Rearrange inclusion of header files in ascending order
    - pass (*ptr) to sizeof() instead of (struct xyz)


    Hope i haven't missed any review comments.

    Viresh Kumar (20):
    ARM: asm/pl080.h: Protect against multiple inclusion of header file
    dmaengine/amba-pl08x: Resolve formatting issues
    dmaengine/amba-pl08x: Rearrange inclusion of header files in
    ascending order
    dmaengine/amba-pl08x: pass (*ptr) to sizeof() instead of (struct xyz)
    dmaengine/amba-pl08x: Complete doc comment for struct pl08x_txd
    dmaengine/amba-pl08x: Remove redundant comment and rewrite original
    dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info
    dmaengine/amba-pl08x: support runtime PM
    dmaengine/amba-pl08x: Simplify pl08x_ensure_on()
    dmaengine/amba-pl08x: No need to check "ch->signal < 0"
    dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt
    dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()
    dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width
    (not MIN(width))
    dmaengine/amba-pl08x: Add prep_single_byte_llis() routine
    dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)
    dmaengine/amba-pl08x: Choose peripheral bus as master bus
    dmaengine/amba-pl08x: Pass flow controller information with slave
    channel data
    dmaengine/amba-pl08x: Add support for sg len greater than one for
    slave transfers
    dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool
    dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling
    kfree() directly

    arch/arm/include/asm/hardware/pl080.h | 4 +
    drivers/dma/amba-pl08x.c | 623 ++++++++++++++++-----------------
    include/linux/amba/pl08x.h | 30 ++-
    3 files changed, 332 insertions(+), 325 deletions(-)

    --
    1.7.2.2



    \
     
     \ /
      Last update: 2011-08-01 11:45    [W:0.045 / U:0.036 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site