Messages in this thread | | | Date | Sat, 30 Jul 2011 07:28:26 +0200 | From | Dominik Brodowski <> | Subject | Re: Problem with ide-cs |
| |
Larry,
On Fri, Jul 29, 2011 at 11:14:20PM -0500, Larry Finger wrote: > With kernel 3.0, my external hard drive attached to a PCMCIA card reports > "irq 11: nobody cared (try booting with the "irqpoll" option)". The > driver in question is ide-cs. When I try irqpoll, the device works > correctly. Naturally, the interrupt is shared with yenta, the PCMCIA > adapter driver. In addition, that same interrupt is used by a BCM4318 > Cardbus device. > > I plan on preparing a Bugzilla entry for this problem, but I'm not quite > ready. What I would like to know if there is any documentation on what > kinds of changes are needed to fix the problem.
Let me guess: it worked fine in 2.6.39, or .38? Output of "lspci -vv", "dmesg" for a working and a non-working kernel would be good starting points for trying to debug this issue.
Best, Dominik
| |